Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 1-Vinyl-2-pyrrolidinone
- Product Code
- V3409
- Chemical Name
- 1-Vinyl-2-pyrrolidinone
Regulatory Identifiers
- CAS Number
- 88-12-0 Check regulations →
- REACH No.
- 01-2119498301-39-XXXX
Identified Uses
Laboratoriumchemikaliën, Vervaardiging van stoffen
Manufacturers & Suppliers
Merck Life Science BV/SRL
distributor
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1-Vinyl-2-pyrrolidon EC: 201-800-4 | 88-12-0 | 100% | Yes |
Notes
Voor de volledige text van H-zinnen zoals vermeld in deze paragraaf, zie paragraaf 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inademen: frisse lucht. Direct een arts waarschuwen. Bij ademstilstand: Meteen mechanische beademing, eventueel zuurstof toedienen.
Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Een arts raadplegen.
Na oog contact: uitspoelen met ruim voldoende water. Onmiddellijk een oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Immediate Medical Attention
Geen gegevens beschikbaar
Medical Treatment
Geen gegevens beschikbaar
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact: Material: butyl rubber, Minimum layer thickness: 0.7 mm, Breakthrough time: 480 min, Tested material: Butoject (KCL 898). Splash contact: Material: Latex gloves, Minimum layer thickness: 0.6 mm, Breakthrough time: 30 min, Tested material: Lapren (KCL 706 / Aldrich Z677558, Size M). This recommendation applies only to the product mentioned in the safety data sheet, for the applications indicated by us. When the substance is dissolved in, or mixed with other substances, under conditions other than those mentioned in EN 16523-1, please contact the supplier of the CE-approved gloves (e.g., KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use face and/or eye protection tested and approved by official institutions such as NIOSH (US) or EN166 (EU). Tightly fitting safety goggles.
Recommended filter type: Filter A (according to DIN 3181) for vapors of organic compounds. The employer must ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the supplier's regulations. These measures must be extensively documented.
protective clothing
Do not allow product to enter sewage system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (ka mertemperatuur).
Vormt ontplofbare mengsels met lucht bij sterke verhitting. Het kritische bereik is vanaf ca. 15 Kelvin lager dan het vlampunt.
Heftige reacties mogelijk met: Peroxiden, polymerisatie-initiatoren, Sterke oxidatiemiddelen, zuren
Sterke verhitting.
geen informatie beschikbaar
In geval van brand: zie hoofdstuk 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 1-Vinyl-2-pyrrolidinone?
The signal word is danger.
What is the physical form of 1-Vinyl-2-pyrrolidinone?
1-Vinyl-2-pyrrolidinone is a vloeibaar with geen gegevens beschikbaar color. It has kenmerkend odor.
What is 1-Vinyl-2-pyrrolidinone used for?
Laboratoriumchemikaliën, Vervaardiging van stoffen
What are the hazard statements for 1-Vinyl-2-pyrrolidinone?
This substance has 5 hazard statements:
- H302 + H312 + H332: Schadelijk bij inslikken, bij contact met de huid en bij inademing.
- H318: Veroorzaakt ernstig oogletsel.
- H335: Kan irritatie van de luchtwegen veroorzaken.
- H351: Verdacht van het veroorzaken van kanker.
- H373: Kan schade aan organen (Lever) veroorzaken bij langdurige of herhaalde blootstelling.
What is the melting point of 1-Vinyl-2-pyrrolidinone?
The melting point is Smeltpunt/-traject: 13 - 14 C and the boiling point is 92 - 95 C bij 15 hPa - lit..