Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Acrylonitril
- Product Code
- 01710
- Chemical Name
- Acrylonitril
Regulatory Identifiers
- CAS Number
- 107-13-1 Check regulations →
- REACH No.
- 01-2119474195-34-XXXX
Identified Uses
Laboratoriumchemikaliën, Vervaardiging van stoffen
Manufacturers & Suppliers
Sigma-Aldrich
distributor
Merck Life Science BV/SRL
distributor
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS05
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acrylnitril EC: 203-466-5 | 107-13-1 | 100% | Yes |
Notes
Voor de volledige text van H-zinnen zoals vermeld in deze paragraaf, zie paragraaf 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inademen: frisse lucht. Direct een arts waarschuwen. Bij ademstilstand: Meteen mechanische beademing, eventueel zuurstof toedienen.
Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Onmiddellijk een arts waarschuwen.
Na oog contact: uitspoelen met ruim voldoende water. Onmiddellijk een oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer water laten drinken (niet meer dan twee glazen). Onmiddellijk een arts raadplegen. Alleen in uitzonderlijke gevallen, wanneer geen medische hulp beschikbaar is binnen n uur, braken opwekken (alleen bij personen die wakker en volledig bij bewustzijn zijn), actieve kool (20 tot 40@g in suspensie van 10%) toedienen en zo snel mogelijk een arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact: Material: butyl rubber, Minimum layer thickness: 0.7 mm, Breakthrough time: 480 min, Tested material: Butoject (KCL 898). Splash contact: Material: Chloroprene, Minimum layer thickness: 0.65 mm, Breakthrough time: 30 min, Tested material: KCL 720 Camapren. These recommendations apply to the product mentioned in the safety data sheet for the specified applications. If the substance is dissolved in or mixed with other substances under conditions other than those mentioned in EN374, please contact the supplier of the CE-approved gloves.
Use face and/or eye protection tested and approved by official institutions such as NIOSH (US) or EN166 (EU). Close-fitting safety goggles.
Recommended filter type: Filter A-(P3). The employer must ensure that maintenance, cleaning and testing of respiratory protection devices are carried out according to the supplier's regulations. These measures must be extensively documented.
Flame-retardant, anti-static protective clothing.
Do not allow product to enter sewage system. Risk of explosion.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1093
- Transport Class
- 3 (6.1)
- Packing Group
- I
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Acrylonitril?
The signal word is danger.
What is the physical form of Acrylonitril?
Acrylonitril is a vloeibaar appearing as helder, vloeibaar with kleurloos color. It has stekend odor.
What is Acrylonitril used for?
Laboratoriumchemikaliën, Vervaardiging van stoffen
What are the hazard statements for Acrylonitril?
This substance has 9 hazard statements:
- H225: Licht ontvlambare vloeistof en damp.
- H301 + H311 + H331: Giftig bij inslikken, bij contact met de huid en bij inademing.
- H315: Veroorzaakt huidirritatie.
- H317: Kan een allergische huidreactie veroorzaken.
- H318: Veroorzaakt ernstig oogletsel.
- H335: Kan irritatie van de luchtwegen veroorzaken.
- H350: Kan kanker veroorzaken.
- H361: Wordt ervan verdacht de vruchtbaarheid te schaden. Wordt ervan verdacht het ongeboren kind te schaden.
- H411: Giftig voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of Acrylonitril?
The melting point is -83 C - lit. and the boiling point is 77 C - lit..