Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- α-Methylstyreen (gestabiliseerd met 4-tert-butyliprocatechol) voor synthese
- Product Code
- 8.06086
- Chemical Name
- α-Methylstyreen
Regulatory Identifiers
- CAS Number
- 98-83-9 Check regulations →
- REACH No.
- Een registratienummer is niet beschikbaar voor deze stof omdat de stof of het gebruik is uitgezonderd voor registratie, voor het jaarlijks volume geen registratie vereist is of de registratie is voorzien met een latere registratie deadline.
Identified Uses
Synthese chemicalie
Manufacturers & Suppliers
Merck Life Science BV/SRL
distributor
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS08
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Phenylpropene EC: 202-705-0 | 98-83-9 | 100% | Yes |
Notes
Voor de volledige text van H-zinnen zoals vermeld in deze paragraaf, zie paragraaf 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
frisse lucht. Arts waarschuwen.
Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Een arts raadplegen.
uitspoelen met ruim voldoende water. Oogarts raadplegen. Contactlenzen uitnemen.
Onmiddellijk een arts waarschuwen.
Symptoms: oppassen als slachtoffer braakt. Gevaar voor aspiratie! Houdt de luchtwegen vrij. Uitvallen van de longfunctie mogelijk na aspireren van het braaksel.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Ethyl methacrylate (gestabiliseerd) synthese kwaliteit
CAS: 97-63-2
2,6-Di-|tert-butyl-|4-methylfenol voor synthese
CAS: 128-37-0
Styreen (gestabiliseerd) synthese kwaliteit
CAS: 100-42-5
Methylcyclohexaan voor synthese
CAS: 108-87-2
Methylcyclopentaan voor synthese
CAS: 96-37-7
Methylcyclopentaan voor synthese
CAS: 96-37-7
2-tert-butyl|amino-ethanol voor synthese
CAS: 4620-70-6
Styreen ≥99,5 %, voor synthese, gestabiliseerd
CAS: 100-42-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact: Material: Viton, Minimum layer thickness: 0.7 mm, Breakthrough time: 480 min, Tested material: Vitoject (KCL 890 / Aldrich Z677698, Size M). Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0.4 mm, Breakthrough time: 30 min, Tested material: Camatril (KCL 730 / Aldrich Z677442, Size M). Recommendations are for the product mentioned in the safety data sheet for the specified applications. For solutions or mixtures under conditions other than those mentioned in EN374, contact the supplier of CE-approved gloves.
Use face and/or eye protection tested and approved by official institutions such as NIOSH (US) or EN166 (EU). Safety glasses.
Recommended filter type: Filter A (according to DIN 3181) for vapors of organic compounds. The employer must ensure that maintenance, cleaning, and testing of respiratory protective devices are carried out according to the supplier's regulations. These measures must be extensively documented.
Flame-retardant, antistatic protective clothing.
Do not allow product to enter the sewage system. Risk of explosion.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2303
- Shipping Name
- ISOPROPENYLBENZENE
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for α-Methylstyreen (gestabiliseerd met 4-tert-butyliprocatechol) voor synthese?
The signal word is danger.
What is the physical form of α-Methylstyreen (gestabiliseerd met 4-tert-butyliprocatechol) voor synthese?
α-Methylstyreen (gestabiliseerd met 4-tert-butyliprocatechol) voor synthese is a vloeibaar with kleurloos color. It has geen gegevens beschikbaar odor.
What is α-Methylstyreen (gestabiliseerd met 4-tert-butyliprocatechol) voor synthese used for?
Synthese chemicalie
What are the hazard statements for α-Methylstyreen (gestabiliseerd met 4-tert-butyliprocatechol) voor synthese?
This substance has 7 hazard statements:
- H226: Ontvlambare vloeistof en damp.
- H304: Kan dodelijk zijn als de stof bij inslikken in de luchtwegen terechtkomt.
- H317: Kan een allergische huidreactie veroorzaken.
- H319: Veroorzaakt ernstige oogirritatie.
- H335: Kan irritatie van de luchtwegen veroorzaken.
- H361: Wordt ervan verdacht de vruchtbaarheid te schaden. Wordt ervan verdacht het ongeboren kind te schaden.
- H411: Giftig voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of α-Methylstyreen (gestabiliseerd met 4-tert-butyliprocatechol) voor synthese?
The melting point is -24 C and the boiling point is 164 - 168 C bij 1.013 hPa.