NextSDS Logo
Safety Data Sheet NL

Ijzer(III) chloride ≥98,5 %, zeer zuiver, watervrij

CAS 7705-08-0
EC 231-729-4

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Ijzer(III) chloride ≥98,5 %, zeer zuiver, watervrij
Product Code
5192
Chemical Name
Ijzer(III) chloride

Regulatory Identifiers

CAS Number
7705-08-0 Check regulations →
EC Number
231-729-4 Check regulations →
REACH No.
01-2119497998-05-xxxx

Identified Uses

Laboratoriumchemicaliën, Analytische en laboratoriumtoepassingen, Formuleren [mengen] van preparaten en/of om-pakken (geen legeringen), Tussenproduct, Industrieel gebruik, Professioneel gebruik

Uses advised against

Niet te gebruiken voor privédoeleinden (huishouden). Eet- en drinkwaren en diervoeder.

Manufacturers & Suppliers

Carl Roth GmbH + Co. KG logo

Carl Roth GmbH + Co. KG

manufacturer

Schoemperlenstr. 3-5, D-76185 Karlsruhe, Duitsland

+49 (0) 721 - 56 06 0

https://www.carlroth.de

CARL ROTH GmbH + Co. KG logo

CARL ROTH GmbH + Co. KG

importer

België

+32 3 2834710 (Vlaanderen) / +32 80 447958 (Wallonie)

https://www.carlroth.be

Emergency Contacts

Centre Antipoisons c/o Hôpital Militaire Reine Astrid

+32 70 245 245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1 H290
Acute Tox. Cat. 4 H302
Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

Hazard Statements

H290 Kan bijtend zijn voor metalen
H302 Schadelijk bij inslikken
H315 Veroorzaakt huidirritatie
H317 Kan een allergische huidreactie veroorzaken
H318 Veroorzaakt ernstig oogletsel

Precautionary Statements

P280 Beschermende handschoenen/oogbescherming dragen
P302+P352 BIJ CONTACT MET DE HUID: met veel water en zeep wassen
P305+P351+P338 BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen
P310 Onmiddellijk een ANTIGIFCENTRUM/arts raadplegen

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Ijzer(III) chloride EC: 231-729-4 7705-08-0 98.5% Yes
nikkeldichloride EC: 231-743-0 7718-54-9 0.1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Voor verse lucht zorgen. Bij twijfel of bij aanhoudende symptomen een arts raadplegen.

Symptoms: Irritatie

Skin contact

Huid met water afspoelen/afdouchen. Na aanraking met de huid onmiddellijk wassen met veel water. In geval van huidreacties arts consulteren. In geval van huidirritatie arts raadplegen.

Symptoms: Allergische reacties, Corrosie

Eye contact

Bij contact met de ogen direct met geopende oogleden 10 tot 15 minuten met stromend water spoelen en oogarts consulteren.

Symptoms: Gevaar voor ernstig oogletsel, Gevaar voor blindheid

Ingestion

Meteen mond uitspoelen en veel water drinken. Mond met water spoelen (alleen als de persoon bij bewustzijn is). Onmiddellijk een arts raadplegen. Een arts raadplegen.

Symptoms: Braken, Maagperforatie

Immediate Medical Attention

geen

Medical Treatment

geen

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Draag geschikte handschoenen. Geschikt zijn volgens EN 374 beproefde handschoenen tegen chemicaliën. Aanbevolen materiaal: NBR (Nitrilrubber) met een materiaaldikte van >0,11 mm en een doorbraaktijd van het handschoenmateriaal van >480 minuten (permeatieniveau: 6).

Eyes

Veiligheidsbril met zijbescherming dragen.

Respiratory

Adembescherming is noodzakelijk bij stofontwikkeling. Gebruik een deeltjesfilter (EN 143), type P2 (filtert minstens 94% van de luchtpartikels, kleurcode: wit).

Skin/Body

Rustperioden voor regeneratie van de huid inlassen. Preventieve huidbescherming (huidbeschermende crèmes) wordt aanbevolen.

Environmental

Vermijden dat het product in afvoerkanalen, oppervlaktewater of grondwater terechtkomt.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Freezing Point
---
Solidification Point
---
Kinematic Viscosity
niet relevant
State Under Standard Conditions
---
Lower Explosive Limit
niet relevant (vast)
Colour
donkerbruin
Relative Evaporation Rate
---
Flash Point
niet toepasbaar
Boiling Point
niet bepaald
Solubility In Water
920 [g] / l bij 20 C
Flammability
niet brandbaar
Auto Ignition Temperature
niet bepaald
Odor Threshold
---
Decomposition Temperature
480 C (ECHA)
Vapor Pressure
1 hPa bij 20 C
Physical State Data
solid
Explosive Limits
---
Voc Content
---
Relative Density
---
Bulk Density
1.000 [kg] / m
Melting Point
306 C (ECHA)
Partition Coefficient
-4 (24 C)
Solubility
---
Properties Status
---
Softening Point
---
Cloud Point
---
Molecular Weight
---
Odor
stekend
Upper Explosive Limit
niet relevant (vast)
Vapor Density
---
Dynamic Viscosity
---
Physical State
vast
Form
poeder, kristallijn
Metal Corrosion
categorie 1: bijtend voor metalen
Crystallisation Point
---
Solubility In Fat
---
Evaporation Rate
---
Density
3,65 [g] / cm (ECHA)
Colour Intensity
---
Ph
1 (in waterige oplossing: 200 [g] / l, 20 C)
Appearance
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1773
Shipping Name
Ferric chloride, anhydrous
Transport Class
8
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Ijzer(III) chloride ≥98,5 %, zeer zuiver, watervrij?

The signal word is danger.

What is the physical form of Ijzer(III) chloride ≥98,5 %, zeer zuiver, watervrij?

Ijzer(III) chloride ≥98,5 %, zeer zuiver, watervrij is a vast with donkerbruin color. It has stekend odor.

What is Ijzer(III) chloride ≥98,5 %, zeer zuiver, watervrij used for?

Laboratoriumchemicaliën, Analytische en laboratoriumtoepassingen, Formuleren [mengen] van preparaten en/of om-pakken (geen legeringen), Tussenproduct, Industrieel gebruik, Professioneel gebruik

What are the hazard statements for Ijzer(III) chloride ≥98,5 %, zeer zuiver, watervrij?

This substance has 5 hazard statements:

  • H290: Kan bijtend zijn voor metalen
  • H302: Schadelijk bij inslikken
  • H315: Veroorzaakt huidirritatie
  • H317: Kan een allergische huidreactie veroorzaken
  • H318: Veroorzaakt ernstig oogletsel

What is the melting point of Ijzer(III) chloride ≥98,5 %, zeer zuiver, watervrij?

The melting point is 306 C (ECHA) and the boiling point is niet bepaald.