NextSDS Logo
Safety Data Sheet NL

MOTIP DECO SPRAY PAINT RAL VARIOUS COLOURS 400 ML

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MOTIP DECO SPRAY PAINT RAL VARIOUS COLOURS 400 ML
Product Code
01600-01699

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Gebruikssector SU21 Consumentengebruik: Particuliere huishoudens / algemeen publiek / consumenten SU22 Professioneel gebruik: Publiek domein (administratie, onderwijs, amusement, dienstverlening, ambachtslieden) Productcategorie PC9a Coatings en verven, verdunners, verfafbijtmiddelen Procescategorie PROC7 Spuiten in een industrile omgeving PROC11 Spuiten buiten industrile omgevingen Toepassing van de stof / van de bereiding Verf

Manufacturers & Suppliers

M

MOTIP DUPLI B.V.

manufacturer

Wolfraamweg 2 NL-8471 XC Wolvega Nederland

Emergency Contacts

Centre Antipoisons-Antigifcentrum

+32 70 245 245

24h/d, 7d/wk

Emergency Contact

+31 (0)561-694400

tijdens kantooruren

NVIC

+31 (0)30-2748888

24 uur per dag

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H222 Zeer licht ontvlambare aerosol. Houder onder druk: kan openbarsten bij verhitting.
H229 Zeer licht ontvlambare aerosol. Houder onder druk: kan openbarsten bij verhitting.
H319 Veroorzaakt ernstige oogirritatie.
H336 Kan slaperigheid of duizeligheid veroorzaken.

Precautionary Statements

P101 Bij het inwinnen van medisch advies, de verpakking of het etiket ter beschikking houden.
P102 Buiten het bereik van kinderen houden.
P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P211 Niet in een open vuur of op andere ontstekingsbronnen spuiten.
P251 Ook na gebruik niet doorboren of verbranden.
P260 Spuitnevel niet inademen.
P410+P412 Tegen zonlicht beschermen. Niet blootstellen aan temperaturen boven 50 C.
P501 De inhoud en de verpakking verwerken volgens de regionale voorschriften.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mengsel van na elkaar aangevoerde stoffen met ongevaarlijke bijmengingen.

Chemical Name CAS Number Concentration Hazardous
N/A --- 25 - 50% Yes
N/A --- 12.5 - 20% Yes
N/A --- 12.5 - 20% Yes
N/A --- 10 - 12.5% Yes
N/A --- 10 - 12.5% Yes
N/A --- 0.5% Yes

De woordelijke inhoud van de opgegeven aanwijzingen inzake de mogelijke gevaren is te vinden in hoofdstuk 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Frisse lucht toedienen; bij klachten arts ontbieden.

Eye contact

De ogen gedurende verscheidene minuten onder stromend water afspoelen terwijl de oogspleet geopend blijft. Bij aanhoudende klachten een dokter raadplegen.

Ingestion

Drink zeer veel water en voer verse lucht aan. Onmiddellijk een dokter waarschuwen.

Immediate Medical Attention

Onmiddellijk een dokter waarschuwen na inslikken. Bij klachten na inademen arts ontbieden. Bij aanhoudende klachten na oogcontact een dokter raadplegen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Het handschoenmateriaal moet ondoorlatend en bestand zijn tegen het product / de stof / de bereiding. Op grond van ontbrekende testen kan geen aanbeveling voor handschoenmateriaal voor het product / de bereiding / het chemicalinmengsel afgegeven worden. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. De keuze van een geschikte handschoen is niet alleen afhankelijk van het materiaal, maar ook van andere kwaliteitskenmerken en verschilt van fabrikant tot fabrikant. Aangezien het product uit meerdere stoffen is samengesteld, is de duurzaamheid van de handschoenmaterialen niet vooraf berekenbaar en moet derhalve vr het gebruik worden getest. Butylrubber handschoenen met een dikte van 0.4 mm zijn bestand tegen: Aceton: 480 min, Butylacetaat: 60 min, Ethyl acetate: 170 min, Xylene: 42 min. De precieze penetratietijd kunt u te weten komen bij de handschoenfabrikant; houd er rekening mee.

Eyes

Nauw aansluitende veiligheidsbril

Respiratory

Bij korte of geringe belasting ademfiltertoestel; bij intensieve resp. langdurige expositie een van de omringende lucht onafhankelijk ademhalingstoestel gebruiken.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
---
Physical State Data
aerosol
State Under Standard Conditions
---
Appearance
---
Colour
Verschillend, naargelang van kleuring
Colour Intensity
---
Form
Arosol
Odor
Oplosmiddelachtig
Odor Threshold
Niet bepaald.
Ph
Niet bepaald.
Melting Point
Niet bepaald.
Boiling Point
Vanwege aerosol niet bruikbaar.
Flash Point
<0 C (<32 F)
Freezing Point
Niet bepaald.
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Niet bruikbaar.
Vapor Pressure
3.500 hPa (2.625,2 mm Hg)
Vapor Density
Niet bepaald.
Relative Density
Niet bepaald.
Bulk Density
---
Density
0,76 g/cm (6,34 lbs/gal)
Flammability
Niet bruikbaar.
Upper Explosive Limit
13 Vol %
Lower Explosive Limit
0,6 Vol %
Explosive Limits
---
Auto Ignition Temperature
Het produkt ontbrandt niet uit zichzelf.
Decomposition Temperature
Niet bepaald.
Solubility
Niet resp. gering mengbaar.
Partition Coefficient
Niet bepaald.
Solubility In Water
Niet resp. gering mengbaar.
Solubility In Fat
---
Molecular Weight
---
Voc Content
82,39 %
Metal Corrosion
---
Dynamic Viscosity
Niet bepaald.
Kinematic Viscosity
Niet bepaald.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1950
IMDG

SW1 Protected from sources of heat. SW22 For AEROSOLS with a maximum capacity of 1 litre: Category A. For AEROSOLS with a capacity above 1 litre: Category B. For WASTE AEROSOLS: Category C, Clear of living quarters. SG69 For AEROSOLS with a maximum capacity of 1 litre: Segregation as for class 9. Stow "separated from" class 1 except for division 1.4. For AEROSOLS with a capacity above 1 litre: Segregation as for the appropriate subdivision of class 2. For WASTE AEROSOLS: Segregation as for the appropriate subdivision of class 2.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MOTIP DECO SPRAY PAINT RAL VARIOUS COLOURS 400 ML?

The signal word is danger.

What is the solubility of MOTIP DECO SPRAY PAINT RAL VARIOUS COLOURS 400 ML?

Niet resp. gering mengbaar.

What is MOTIP DECO SPRAY PAINT RAL VARIOUS COLOURS 400 ML used for?

Gebruikssector SU21 Consumentengebruik: Particuliere huishoudens / algemeen publiek / consumenten SU22 Professioneel gebruik: Publiek domein (administratie, onderwijs, amusement, dienstverlening, ambachtslieden) Productcategorie PC9a Coatings en verven, verdunners, verfafbijtmiddelen Procescategorie PROC7 Spuiten in een industrile omgeving PROC11 Spuiten buiten industrile omgevingen Toepassing van de stof / van de bereiding Verf

What are the hazard statements for MOTIP DECO SPRAY PAINT RAL VARIOUS COLOURS 400 ML?

This substance has 4 hazard statements:

  • H222: Zeer licht ontvlambare aerosol. Houder onder druk: kan openbarsten bij verhitting.
  • H229: Zeer licht ontvlambare aerosol. Houder onder druk: kan openbarsten bij verhitting.
  • H319: Veroorzaakt ernstige oogirritatie.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.

What is the melting point of MOTIP DECO SPRAY PAINT RAL VARIOUS COLOURS 400 ML?

The melting point is Niet bepaald. and the boiling point is Vanwege aerosol niet bruikbaar..

Compliance Scanner

Scan your compliance