Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Titanium (IV) oxide ROTI®nanoMETIC ≥99,9 %, 4-8 nm
- Product Form
- Nanovorm
- Product Code
- 8254
- Chemical Name
- Titanium (IV) oxide
- Synonyms
- Titaandioxide
Regulatory Identifiers
- CAS Number
- 13463-67-7 Check regulations →
- EC Number
- 236-675-5 Check regulations →
- REACH No.
- De registratie van de geïdentificeerde gebruiksvormen is niet noodzakelijk, omdat de stof conform de REACH-verordning niet registratieplichtig is (< 1 t/a).
Identified Uses
Laboratoriumchemicaliën, Analytische en laboratoriumtoepassingen
Uses advised against
Niet voor verspreien of verstuiven gebruiken. Niet te gebruiken voor producten die in direct contact met de huid komen. Niet te gebruiken voor privédoeleinden (huishouden). Eet- en drinkwaren en diervoeder.
Manufacturers & Suppliers
Carl Roth GmbH + Co. KG
manufacturer
Schoemperlenstr. 3-5, D-76185 Karlsruhe, Duitsland
+49 (0) 721 - 56 06 0
https://www.carlroth.de
CARL ROTH GmbH + Co. KG
importer
België
+32 3 2834710 (Vlaanderen) / +32 80 447958 (Wallonie)
https://www.carlroth.be
Emergency Contacts
Centre Antipoisons c/o Hôpital Militaire Reine Astrid
+32 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Titanium (IV) oxide EC: 236-675-5 | 13463-67-7 | --- | No |
| Salpeterzuur ... % [C 70 %] EC: 231-714-2 | 7697-37-2 | 30% | No |
Notes
Zie RUBRIEK 16 voor de volledige tekst Bevat: Nanomateriaal, Nanovorm
First Aid Measures
Emergency procedures for chemical exposure incidents
Voor verse lucht zorgen. Bij twijfel of bij aanhoudende symptomen een arts raadplegen.
Na aanraking met de huid onmiddellijk wassen met veel water. Behandeling door een arts is direct noodzakelijk, omdat niet behandelde brandwonden in moeilijk geneesbare wonden kunnen veranderen.
Bij contact met de ogen direct met geopende oogleden 10 tot 15 minuten met stromend water spoelen en oogarts consulteren. Onbeschadigd oog beschermen.
Meteen mond uitspoelen en veel water drinken. Onmiddellijk een arts raadplegen.
Symptoms: gevaar op perforatie van de slokdarm en de maag (sterk bijtend effect)
Immediate Medical Attention
Bij twijfel of bij aanhoudende symptomen een arts raadplegen (inademing). Behandeling door een arts is direct noodzakelijk bij huidcontact. Oogarts consulteren bij oogcontact. Onmiddellijk een arts raadplegen bij inslikken.
Medical Treatment
geen
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Koper ROTI®nanoMETIC ≥97 %, 100 nm
CAS: 7440-50-8
Aluminium oxide ROTI®METIC 99,995 % (4N5)
CAS: 1344-28-1
Aluminium oxide ROTI®METIC 99,995 % (4N5)
CAS: 1344-28-1
Titanium(IV) oxide, anatase
CAS: 1317-70-0
Titanium(IV) oxide, `Rectapur` (titanium dioxide)
---
Titanium(IV) butoxide
CAS: 5593-70-4
Magnesiumnitraat-hexahydraat ROTI®METIC 99,999 % (5N)
CAS: 13446-18-9
Titanium ICP-standaard herleidbaar tot SRM van NIST (NH₄)₂TiF₆ in H₂O 1000 mg/l Ti Certipur®
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Draag geschikte handschoenen. Geschikt zijn volgens EN 374 beproefde handschoenen tegen chemicalin. Voor gebruik lekdichtheid/ondoordringbaarheid bepalen. Er wordt aangeraden om in geval van speciale applicaties de chemische bestendigheid van de boven genoemde veiligheidshandschoenen samen met de leverancier van de handschoenen na te gaan. De tijden zijn geschatte waarden van metingen bij 22 C en permanent contact. Verhoogde temperaturen als gevolg van verhitte stoffen, lichaamswarmte enz. En een vermindering van de effectieve laagdikte door rekken kan leiden tot een aanzienlijke verkorting van de doorbraaktijd. Neem in geval van twijfel contact op met de fabrikant. Bij een ongeveer 1,5 maal grotere / kleinere laagdikte wordt de respectieve doorbraaktijd verdubbeld / gehalveerd. De gegevens zijn alleen van toepassing op de zuivere stof. Bij overdracht op mengsels van stoffen mogen ze alleen als richtlijn worden beschouwd. . soort materiaal NBR (Nitrilrubber) . materiaaldikte >0,11 mm . doorbraaktijd van het handschoenmateriaal >480 minuten (permeatieniveau: 6)
Veiligheidsbril met zijbescherming dragen. Gelaatsbescherming dragen.
Adembescherming is noodzakelijk bij: Stofontwikkeling. Deeltjesfilter (EN 143). P1 (filtert minstens 80% van de luchtpartikels, kleurcode: wit).
Rustperioden voor regeneratie van de huid inlassen. Preventieve huidbescherming (huidbeschermende crèmes) wordt aanbevolen.
Vermijden dat het product in afvoerkanalen, oppervlaktewater of grondwater terechtkomt.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3260
- Shipping Name
- CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
- Transport Class
- 8
- Packing Group
- II
Aan de bepalingen voor gevaarlijke goederen (ADR) moet ook in het bedrijf worden voldaan.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Titanium (IV) oxide ROTI®nanoMETIC ≥99,9 %, 4-8 nm known by?
Titanium (IV) oxide ROTI®nanoMETIC ≥99,9 %, 4-8 nm is also known as: Titaandioxide
What is the hazard signal word for Titanium (IV) oxide ROTI®nanoMETIC ≥99,9 %, 4-8 nm?
The signal word is danger.
What is the physical form of Titanium (IV) oxide ROTI®nanoMETIC ≥99,9 %, 4-8 nm?
Titanium (IV) oxide ROTI®nanoMETIC ≥99,9 %, 4-8 nm is a vast with wit - lichtgeel color. It has geurloos odor.
What is Titanium (IV) oxide ROTI®nanoMETIC ≥99,9 %, 4-8 nm used for?
Laboratoriumchemicaliën, Analytische en laboratoriumtoepassingen
What are the hazard statements for Titanium (IV) oxide ROTI®nanoMETIC ≥99,9 %, 4-8 nm?
This substance has 1 hazard statement:
- H314: Veroorzaakt ernstige brandwonden en oogletsel
What is the melting point of Titanium (IV) oxide ROTI®nanoMETIC ≥99,9 %, 4-8 nm?
The melting point is 1.825 and the boiling point is niet bepaald.