NextSDS Logo
Safety Data Sheet NL

PLASTIK 70

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
PLASTIK 70
Product Form
Aërosol
Product Code
BDS002139AE

Regulatory Identifiers

CAS Number
N/A
UFI Code
DU2X-K87W-600G-DQM2

Identified Uses

Professioneel gebruik, Anti Corrosie Producten

Uses advised against

Geen aanvullende informatie beschikbaar

Manufacturers & Suppliers

CRC Industries Europe B.V. logo

CRC Industries Europe B.V.

distributor

Touwslagerstraat 1, 9240 Zele, Belgium

http://www.crcind.com

Emergency Contacts

CRC Industries Europe B.V.

+32(0)52/45.60.11

9-17h CET

Nationaal Vergiftigingen Informatie Centrum (NVIC)

+31 88 755 80 00

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H222 Zeer licht ontvlambare aerosol.
H229 Houder onder druk: kan open barsten bij verhitting.
H319 Veroorzaakt ernstig oogirritatie.
H336 Kan slaperigheid of duizeligheid veroorzaken.

Precautionary Statements

P102 Buiten het bereik van kinderen houden.
P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P211 Niet in een open vuur of op andere ontstekingsbronnen spuiten.
P251 Ook na gebruik niet doorboren of verbranden.
P261 Inademing van damp/spuitnevel vermijden.
P280 Draag beschermende handschoenen/beschermende kleding/oogbescherming/gelaatsbescherming.
P410+P412 Tegen zonlicht beschermen. Niet blootstellen aan temperaturen boven 50 C.
P501 Inhoud/verpakking afvoeren naar een verzamelpunt voor gevaarlijk of speciaal afval, overeenkomstig de lokale, regionale, nationale en/of internationale regelgeving.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
n-butylacetaat EC: 204-658-1 123-86-4 25 - 50% Yes
ethylacetaat EC: 205-500-4 141-78-6 10 - 25% Yes
1-methoxypropaan-2-ol; propyleenglycolmonomethylether EC: 203-539-1 107-98-2 10 - 25% Yes
methylmethacrylaat; methyl-2-methylprop-2-enoaat; methyl-2-methylpropenoaat EC: 201-297-1 80-62-6 0.25% Yes
n-butylmethacrylaat EC: 202-615-1 97-88-1 0.25% Yes

Notes

Product onderworpen aan CLP Artikel 1.1.3.7. De openbaarmakingsregels van de componenten zijn in dit geval gewijzigd.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

De persoon in de frisse lucht brengen en ervoor zorgen dat deze gemakkelijk kan ademen. Roep medische hulp in indien verschijnselen/symptomen zich voordoen.

Skin contact

De huid met overvloedig water wassen. Medische hulp inroepen indien irritatie ontstaat.

Eye contact

Als voorzorgsmaatregel de ogen met water uitspoelen. Medische hulp inroepen indien irritatie ontstaat.

Ingestion

Bij onwel voelen een antigifcentrum of een arts raadplegen.

Medical Treatment

Zorg voor algemene ondersteunende maatregelen en behandel symptomatisch. Hou het slachtoffer onder toezicht. Symptomen kunnen zich pas na enige tijd openbaren.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Er moet een goede algehele ventilatie worden gebruikt. Ventiliatiesnelheden moeten zijn aangepast aan de omstandigheden. Gebruik, indien van toepassing, afgesloten procesruimten, plaatselijke afzuiging of andere technische middelen om de concentraties in de lucht onder de aanbevolen blootstellingslimieten te houden. Wanneer er geen blootstellingslimieten zijn vastgesteld, houd dan de concentraties in de lucht op een aanvaardbaar niveau.

Hands

Draag geschikte handschoenen die getest zijn volgens EN374. De doorbraaktijd van de handschoen moet langer zijn dan de totale duur van het gebruik van het product. Als de werkzaamheden met het product langer duurt dan de doorbraaktijd van de handschoen, moet die tussenin vervangen worden. Beschermende handschoenen van polyvinylalcohol.

Eyes

Oogbescherming gebruiken in overeenstemming met EN 166. Veiligheidsbril met zijkleppen.

Respiratory

Bij ontoereikende ventilatie een geschikt ademhalingsapparaat gebruiken. Goedgekeurd gasmasker voor organische dampen. Type filter: A

Skin/Body

Draag geschikte beschermende kleding

Environmental

Voorkom lozing in het milieu. Emissies van ventilatie- of procesapparatuur moet worden gecontroleerd om na te gaan dat zij voldoen aan de vereisten van milieubeschermingswetten.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Crystallisation Point
---
Flammability
Niet van toepassing
Upper Explosive Limit
Niet beschikbaar
Ph
Niet van toepassing
Colour Intensity
---
Voc Content
700 g/l
Lower Explosive Limit
Niet beschikbaar
Decomposition Temperature
Niet beschikbaar
Molecular Weight
---
Appearance
Vloeistof in spuitbus met propaan/butaan drijfgas.
Relative Density
Niet beschikbaar
Softening Point
---
Kinematic Viscosity
Niet beschikbaar
Relative Evaporation Rate
---
State Under Standard Conditions
---
Physical State
Vloeibaar
Odor
Oplosmiddel.
Odor Threshold
Niet beschikbaar
Solubility
niet oplosbaar in water.
Melting Point
Niet van toepassing
Boiling Point
Niet beschikbaar
Solubility In Fat
---
Solubility In Water
niet oplosbaar in water.
Partition Coefficient
Niet van toepassing
Explosive Limits
---
Freezing Point
Niet beschikbaar
Dynamic Viscosity
---
Auto Ignition Temperature
- 200 C
Vapor Pressure
Niet beschikbaar
Vapor Density
---
Evaporation Rate
---
Density
0,919 g/cm bij 20C
Form
---
Physical State Data
liquid
Bulk Density
---
Properties Status
---
Colour
Kleurloos.
Cloud Point
---
Flash Point
-4 C (gesloten beker)
Metal Corrosion
---
Solidification Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN 1950
Shipping Name
SPUITBUSSEN (AROSOLEN)
Transport Class
2.1
ADR

Bijzondere bepalingen voor het vervoer - Colli (ADR) : V14 Bijzondere bepalingen voor het vervoer - Laden, lossen en behandeling (ADR) : CV9, CV12 Bijzondere bepalingen voor het vervoer - Bedrijf (ADR) : S2

IMDG

Bijzondere bepaling (IMDG) : 63, 190, 277, 327, 344, 381, 959

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for PLASTIK 70?

The signal word is danger.

What is the physical form of PLASTIK 70?

PLASTIK 70 is a vloeibaar appearing as vloeistof in spuitbus met propaan/butaan drijfgas. with kleurloos. color. It has oplosmiddel. odor.

What is the solubility of PLASTIK 70?

niet oplosbaar in water.

What is PLASTIK 70 used for?

Professioneel gebruik, Anti Corrosie Producten

What are the hazard statements for PLASTIK 70?

This substance has 4 hazard statements:

  • H222: Zeer licht ontvlambare aerosol.
  • H229: Houder onder druk: kan open barsten bij verhitting.
  • H319: Veroorzaakt ernstig oogirritatie.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.

What is the melting point of PLASTIK 70?

The melting point is Niet van toepassing and the boiling point is Niet beschikbaar.