Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- THINNER CELLULOSE (S010)
- Product Code
- S010
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Elke component van het product is ofwel geregistreerd ofwel vrijgesteld van registratieverplichtingen volgens REACH-Verordening (EG) nr 1907/2006
- UFI Code
- H8UE-00TD-9008-HRFW
Identified Uses
Oplosmiddel
Uses advised against
Op dit ogenblik worden geen ontraden gebruiken geïdentificeerd.
Manufacturers & Suppliers
Brenntag N.V.
distributor
Nijverheidslaan 38, BE 8540 Deerlijk
+32 (0)56 77 6944
Brenntag Nederland B.V.
distributor
Donker Duyvisweg 44, NL 3316 BM Dordrecht
+31 (0)78 65 44 944
Emergency Contacts
Antigifcentrum - Brussel
+32(0)70/245.245
National Poisoning Information Center - Bilthoven
+31(0)88 755 8000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. In case of irregular breathing or respiratory arrest, apply artificial respiration. If unconscious, place person on their side.
Symptoms: Inhalation of high vapor concentrations can cause symptoms such as headache, dizziness, fatigue, nausea and vomiting.
Immediately wash affected area with soap and plenty of water. In case of persistent skin irritation, consult a doctor.
Immediately flush eyes with plenty of water, also under the eyelids, for at least 5 minutes. Consult an ophthalmologist immediately. Go to an eye hospital if possible.
Rinse mouth with water and then drink plenty of water. Never give anything to an unconscious person to drink (or eat). DO NOT induce vomiting. Place a person who is lying on their back and vomiting in the stable side position. Immediately call a doctor.
Immediate Medical Attention
Consult a doctor after significant exposure. Consult an ophthalmologist immediately for eye contact; go to an eye hospital if possible. Immediately call a doctor for ingestion.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Adequate ventilation systems are implied; if ventilation is insufficient, suitable respiratory protection must be worn.
Protective gloves according to EN 374. Observe the requirements for permeability and breakthrough time as provided by the glove supplier. Also consider specific local conditions of use, such as risk of cuts, abrasion, and contact time. Safety gloves must be replaced when worn. Material: Nitrile rubber, Breakthrough time: >= 480 min, Glove thickness: 0.55 mm.
Safety dust goggles.
If ventilation is insufficient, wear suitable respiratory protection. Respiratory protection according to EN 141. Filter type A for organic gases and vapors. Filter type: A, brown; organic vapor type.
Solvent-resistant protective clothing.
Do not allow to drain into surface water or sewage system. Avoid penetration into the soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- FLAMMABLE LIQUID, N.O.S.
- Transport Class
- 3
- Packing Group
- II
vervalt
vervalt
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for THINNER CELLULOSE (S010)?
The signal word is danger.
What is the physical form of THINNER CELLULOSE (S010)?
THINNER CELLULOSE (S010) is a vloeibaar appearing as geen gegevens beschikbaar with helder color. It has oplosmiddel odor.
What is THINNER CELLULOSE (S010) used for?
Oplosmiddel
What are the hazard statements for THINNER CELLULOSE (S010)?
This substance has 8 hazard statements:
- H225: Licht ontvlambare vloeistof en damp.
- H304: Kan dodelijk zijn als de stof bij inslikken in de luchtwegen terechtkomt.
- H315: Veroorzaakt huidirritatie.
- H319: Veroorzaakt ernstige oogirritatie.
- H336: Kan slaperigheid of duizeligheid veroorzaken.
- H361d: Wordt ervan verdacht het ongeboren kind te schaden.
- H373: Kan schade aan organen (Centrale zenuwstelsel) veroorzaken bij langdurige of herhaalde blootstelling.
- H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of THINNER CELLULOSE (S010)?
The melting point is circa -95 C and the boiling point is 55 - 115 C.