Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SIGMA TIGRON AQUA GLOSS
- Product Code
- 10100DN2029
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Consumenten toepassing, Professionele toepassingen, Toegepast d.m.v. spuiten, Applicatie door middel van niet-spuit methodes. Coating.
Manufacturers & Suppliers
PPG Coatings Nederland B.V.
national supplier
Oceanenweg 2 1047 BB Amsterdam Netherlands
+31 (0)297 541234
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Er zijn geen additionele ingredinten aanwezig die, voor zover op dit moment aan leverancier bekend is en in de van toepassing zijnde concentraties, geclassificeerd zijn als schadelijk voor de gezondheid of voor het milieu, PBTs (Persistent Bioaccumulative Toxic) of vPvBs (very Persistent very Bioaccumulative) of stoffen zijn die even zorgwekkend zijn, of waaraan werkplaats blootstellingslimieten zijn toegewezen en die op grond daarvan in deze sectie moeten worden vermeld.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2,4,7,9-Tetramethyldec-5-yne-4,7-diol, ethoxylated EC: 500-022-5 | 9014-85-1 | 0.3% | Yes |
| trimethylolpropaan EC: 201-074-9 | 77-99-6 | 0.3% | Yes |
| 1,2-Benzisothiazool-3(2H) -on EC: 220-120-9 | 2634-33-5 | 0.036% | Yes |
| reactiemassa (3:1) van 5-chloor-2-methyl-2Hisothiazool-3-on en 2-methyl-2H-isothiazool3-on EC: 911-418-6 | 55965-84-9 | 0.001% | Yes |
Notes
Zie Rubriek 16 voor de volledige tekst van de H-zinnen die hierboven staan vermeld. Arbeidshyginische blootstellingsgrenzen, indien beschikbaar, zijn weergegeven in rubriek 8.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Keep the person warm and calm. If the patient is not breathing, breathing irregularly, or if respiratory arrest occurs, artificial respiration or oxygen should be administered by trained personnel.
Remove contaminated clothing and shoes. Clean skin thoroughly with soap and water or use an approved skin cleanser. DO NOT use solvents or thinners.
Symptoms: In case of accidental skin contact, direct exposure to the sun or other sources of UV light should be avoided, as this can lead to severe irritation, including burns. These reactions can be delayed; seek medical attention if pain, irritation, rash, or blistering occurs after contact.
Remove contact lenses, rinse with plenty of clean tap water, hold eyelids apart for at least 10 minutes and seek immediate medical advice.
Symptoms: In case of accidental eye contact, direct exposure to the sun or other sources of UV light should be avoided, as this can lead to severe irritation, including burns. These reactions can be delayed; seek medical attention if pain, irritation, or blistering occurs after contact.
In case of ingestion, immediately consult a doctor and show packaging or label. Keep the person warm and calm. DO NOT induce vomiting.
Immediate Medical Attention
Seek immediate medical advice/consult a doctor immediately in case of eye contact or ingestion. Seek medical attention if pain, irritation, or blistering occurs after eye contact, or if pain, irritation, rash, or blistering occurs after skin contact.
Medical Treatment
No specific treatment is mentioned. However, after inhalation of decomposition products in case of fire, symptoms may be delayed, and the victim may need to remain under medical observation for 48 hours.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Een goede algemene ventilatie zou voldoende moeten zijn om blootstelling aan luchtverontreinigingen op de werkplek onder controle te houden.
Wanneer een risicoanalyse aangeeft dat dit noodzakelijk is, dienen bij het hanteren van chemische producten ondoorlaatbare handschoenen te worden gedragen die resistent zijn tegen chemicaliën en die voldoen aan een goedgekeurde norm. Handschoenmateriaal: polyethyleen.
Veiligheidsbril met zijkapjes. Gebruik oogbescherming overeenkomstig EN 166.
De keuze van een masker moet gebaseerd worden op verwachte blootstellingslimieten, de gevaren van het product en de limieten voor veilig werken van het type masker. Indien werknemers worden blootgesteld aan concentraties boven de blootstellingsgrens, dienen deze een geschikt, gecertificeerd ademhalingstoestel te gebruiken. Wanneer een risicoanalyse aangeeft dat dit noodzakelijk is, dient u een goed passend, luchtzuiverend of luchttoevoerend ademhalingstoestel te gebruiken dat voldoet aan een goedgekeurde standaard. Draag een gas-/stofmasker conform EN140. Filtertype: filter voor organische dampen (type A) en stofdeeltjes P3
Persoonlijke lichaamsbeschermende middelen dienen te worden gekozen op basis van de uit te voeren taak, de daarbij behorende risico's en dient door een specialist te worden goedgekeurd voordat het product wordt gebruikt. Geschikt schoeisel en eventuele aanvullende huidbeschermingsmaatregelen moeten worden geselecteerd op basis van de taak die wordt uitgevoerd en de risico's die daarmee gepaard gaan en deze moeten worden goedgekeurd door een deskundige voorafgaand aan de gebruik van dit product.
Uitstoot van ventilatie of bewerkingsapparatuur moet worden gecontroleerd om er zeker van te zijn dat deze voldoet aan de eisen van de milieubeschermingswetgeving. In sommige gevallen zijn gaswassers, filters of technische modificaties van de procesapparatuur nodig om de emissie terug te brengen tot een aanvaardbaar niveau.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 9006
- Shipping Name
- MILIEUGEVAARLIJKE VLOEISTOF, N.E.G.
- Transport Class
- 9
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SIGMA TIGRON AQUA GLOSS?
The signal word is no signal word.
What is the physical form of SIGMA TIGRON AQUA GLOSS?
SIGMA TIGRON AQUA GLOSS is a vloeistof. with verschillende color. It has karakteristiek. [gering] odor.
What is the solubility of SIGMA TIGRON AQUA GLOSS?
koud water Gedeeltelijk oplosbaar
What is SIGMA TIGRON AQUA GLOSS used for?
Consumenten toepassing, Professionele toepassingen, Toegepast d.m.v. spuiten, Applicatie door middel van niet-spuit methodes. Coating.
What is the melting point of SIGMA TIGRON AQUA GLOSS?
The melting point is Niet bepaald. and the boiling point is >37.78C.