NextSDS Logo
Safety Data Sheet NL

TISSUE-TEK HEMATOXYLIN 3G FOR PRISMA STANDARD SOLUTION RESERVOIRS

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TISSUE-TEK HEMATOXYLIN 3G FOR PRISMA STANDARD SOLUTION RESERVOIRS
Product Code
9130 - 1 (24 ml)

Regulatory Identifiers

CAS Number
N/A

Identified Uses

SU22 Professioneel gebruik. Voor industrieel of institutioneel gebruik. PC21 Laboratoriumchemicaliën.

Manufacturers & Suppliers

Sakura Finetek Europe B.V. logo

Sakura Finetek Europe B.V.

national supplier

Flemingweg 10A, 2408 AV Alphen aan den Rijn, Nederland

+31-88-5920000

http://www.sakura.eu

Emergency Contacts

ARTSEN/BRANDWEER/POLITIE

+31-88-5920000

Alleen tijdens kantooruren

Nationale Vergiftigingen Informatie Centrum

+31-30-274 88 88

24 uur per dag

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 3
Eye Irrit. Cat. 2

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H226 Ontvlambare vloeistof en damp.
H319 Veroorzaakt ernstige oogirritatie.

Precautionary Statements

P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P280 Oogbescherming/gelaatsbescherming dragen.
P337 + P313 Bij aanhoudende oogirritatie: een arts raadplegen.
P370 + P378 In geval van brand: blussen met kooldioxide (CO2), alcohol bestendig schuim, bluspoeder of waternevel.
P501 Inhoud/verpakking afvoeren naar een officieel afvalverzamelpunt.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mengsel.

Chemical Name CAS Number Concentration Hazardous
Ethanol EC: 200-578-6 64-17-5 25 - 50% Yes
Hematoxyline EC: 208-237-3 517-28-2 5 - 10% Yes

Beroepsmatige blootstellingsgrenzen zijn, indien van toepassing, weergegeven in hoofdstuk 8. De volledige teksten van de H-zinnen zijn vermeld in hoofdstuk 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Verplaats het slachtoffer naar de frisse lucht. Raadpleeg een arts indien het slachtoffer zich onwel voelt.

Symptoms: Kan hoofdpijn, duizeligheid en misselijkheid veroorzaken.

Skin contact

Verontreinigde kleding uittrekken. Voor het product opdroogt, huid afspoelen met veel water en zeep.

Symptoms: Kan een droge huid veroorzaken.

Eye contact

Uitspoelen met (lauw) water. Contactlenzen verwijderen. Raadpleeg een arts.

Symptoms: Irriterend. Kan roodheid en pijn veroorzaken.

Ingestion

Geen braken opwekken. Mond uitspoelen. Eén glas water laten drinken. Geef een bewusteloos iemand nooit iets via de mond. Raadpleeg een arts indien het slachtoffer zich onwel voelt.

Symptoms: Kan misselijkheid, braken en diarree veroorzaken.

Medical Treatment

Geen bekend.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Kooldioxide (CO2). Alcohol bestendig schuim. Bluspoeder. Waternevel.

Unsuitable media

Waterstraal.

Specific hazards

Geen bekend.

Firefighter Protection

Gebruik in geval van onvoldoende ventilatie adequate ademhalingsbescherming.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Gevaar voor slippen. Gemorst product onmiddellijk opruimen. Draag schoenen met antislip zolen. Vermijd contact met gemorst of vrijgekomen materiaal. Verwijderd houden van ontstekingsbronnen — Niet roken. Dampen zijn zwaarder dan lucht. Ophoping in laag gelegen ruimtes geeft kans op verstikking.

Large spill

Bij grootschalige lozingen: gemorst product indammen.

Environmental

Vermijd dat het product in het riool, oppervlakte- en/of grondwater terecht komt.

Cleanup methods

Verzamel gemorst materiaal in containers. Absorbeer residuen in zand of in ander inert materiaal. Reinig bevuild oppervlak met ruim water en zeep.

Materials: zand of in ander inert materiaal, water en zeep

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Hanteer volgens de geldende arbeids- en veiligheidsvoorschriften in goed geventileerde ruimtes. Dampen niet inademen. Aanraking met de ogen en de huid vermijden.

Storage

Bewaar vorstvrij, op een koele, droge en goed geventileerde plaats (< 35°C). Verwijderd houden van oxiderende stoffen. Beschermen tegen direct zonlicht. Opslaan overeenkomstig richtlijn PGS 15.

Fire prevention

Uitsluitend vonkvrij gereedschap gebruiken. Voorzorgsmaatregelen treffen tegen ontladingen van statische elektriciteit.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Uitsluitend op goed geventileerde plaatsen gebruiken. De bij de omgang met chemicaliën gebruikelijke voorzorgsmaatregelen in acht nemen. Ethanol is opgenomen in de SZW lijst met CMR stoffen en processen, als bedoeld in artikel 4.11 van het Arbeidsomstandighedenbesluit. Het is door de Gezondheidsraad aangemerkt als carcinogeen en reprotoxisch met streefwaarde TGG (8 u):13 mg/m3 en 1900 mg/m3 (15 min.).

Hands

Bij normaal gebruik geen specifieke handschoenen vereist. Draag bij veelvuldig of langdurig gebruik en bij grootschalige blootstelling geschikte handschoenen. Geschikt materiaal: nitril. ± 0,5 mm. Indicatieve doorbraaktijd: ca. 6 uur.

Eyes

Draag een goedsluitende veiligheidsbril met zijbescherming, conform EN 166 waar gevaar voor contact met de ogen bestaat.

Respiratory

Zorg voor voldoende ventilatie. Draag bij grootschalige blootstelling een geschikte ademhalingsbescherming. Geschikt: gasfilter type A (bruin), klasse I of hoger, bv op een gelaatsmasker conform EN140.

Skin/Body

Bij normaal gebruik geen specifieke beschermende kleding vereist.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Partition Coefficient
Niet bekend
Dynamic Viscosity
---
Colour
Bruin
Softening Point
---
Voc Content
---
Metal Corrosion
---
Solubility In Fat
---
Properties Status
---
Relative Evaporation Rate
< 1 (n-butylacetaat = 1)
Physical State
Vloeibaar
Evaporation Rate
< 1
Molecular Weight
---
Vapor Density
---
Melting Point
< 0 °C
Boiling Point
78 °C
Auto Ignition Temperature
> 425 °C
Vapor Pressure
> 2300 Pa
Solubility In Water
Oplosbaar
Flammability
Niet van toepassing
Freezing Point
---
Kinematic Viscosity
1 mm2/sec
Physical State Data
liquid
Solidification Point
---
Decomposition Temperature
Niet van toepassing
Appearance
Vloeibaar
Crystallisation Point
---
Solubility
---
Density
0,98 g/ml
Form
---
Upper Explosive Limit
19 ( Ethanol )
Odor
Karakteristiek
Cloud Point
---
Lower Explosive Limit
3,4 ( Ethanol )
Relative Density
---
Bulk Density
---
Flash Point
28 °C
Colour Intensity
---
Explosive Limits
---
State Under Standard Conditions
---
Odor Threshold
Niet bekend
Ph
2 - 11,5
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stabiel onder normale omstandigheden.

Reactivity

Zie sub-rubrieken hieronder.

Hazardous reactions

Geen andere gevaarlijke reacties bekend.

Avoid

Zie hoofdstuk 7.

Incompatible

Verwijderd houden van oxiderende stoffen.

Decomposition

Niet bekend.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Afvoer naar een officieel afvalverzamelpunt.

Disposal

Restanten van het product en niet lege verpakking worden beschouwd als gevaarlijk afval.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1170
Shipping Name
ETHANOL OPLOSSING (ETHYLALCOHOL OPLOSSING) OPLOSSING
Transport Class
3
Packing Group
III
ADR

Landspecifieke variaties kunnen van toepassing zijn. Op het transport van dit product kan een "Limited Quantity" situatie van toepassing zijn.

IMDG

Landspecifieke variaties kunnen van toepassing zijn. Op het transport van dit product kan een "Limited Quantity" situatie van toepassing zijn.

IATA

Landspecifieke variaties kunnen van toepassing zijn. Op het transport van dit product kan een "Limited Quantity" situatie van toepassing zijn.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TISSUE-TEK HEMATOXYLIN 3G FOR PRISMA STANDARD SOLUTION RESERVOIRS?

The signal word is warning.

What is the physical form of TISSUE-TEK HEMATOXYLIN 3G FOR PRISMA STANDARD SOLUTION RESERVOIRS?

TISSUE-TEK HEMATOXYLIN 3G FOR PRISMA STANDARD SOLUTION RESERVOIRS is a vloeibaar appearing as vloeibaar with bruin color. It has karakteristiek odor.

What is TISSUE-TEK HEMATOXYLIN 3G FOR PRISMA STANDARD SOLUTION RESERVOIRS used for?

SU22 Professioneel gebruik. Voor industrieel of institutioneel gebruik. PC21 Laboratoriumchemicaliën.

What are the hazard statements for TISSUE-TEK HEMATOXYLIN 3G FOR PRISMA STANDARD SOLUTION RESERVOIRS?

This substance has 2 hazard statements:

  • H226: Ontvlambare vloeistof en damp.
  • H319: Veroorzaakt ernstige oogirritatie.

What is the melting point of TISSUE-TEK HEMATOXYLIN 3G FOR PRISMA STANDARD SOLUTION RESERVOIRS?

The melting point is < 0 °C and the boiling point is 78 °C.