Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Iso Glass 10
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reinigingsmiddel (AISE_SUMI_PW_8_1_G // AISE_SUMI_PW_10_1 // AISE_SUMI_PW_11_1 // AISE_SUMI_PW_19_1)
Manufacturers & Suppliers
BOMA
distributor
Noorderlaan 131 B2030 Antwerpen
003232313389
http://www.boma.eu/
Emergency Contacts
Emergency Contact
+31 30 274 88 88
Emergency Contact
+ 33 (0)1 45 42 59 59
Emergency Contact
(+352) 8002-5500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Bij ernstige of aanhoudende stoornissen: frisse lucht, rust en arts waarschuwen.
Symptoms: geen
Spoelen met water.
Symptoms: geen
Eerst spoelen met veel water, dan zonodig naar arts vervoeren.
Symptoms: roodheid
Eerst spoelen met veel water, dan zonodig naar arts vervoeren.
Symptoms: diarree, hoofdpijn, buikkrampen, slaperigheid, braken
Immediate Medical Attention
Steeds zo spoedig mogelijk medisch advies inwinnen in geval van ernstige of aanhoudende stoornissen.
Medical Treatment
geen
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Sufficient exhaust ventilation should be used if necessary.
Handle with nitrile gloves (EN 374). Minimum breakthrough time of > 480 minutes, thickness 0.35mm. Check gloves thoroughly before use. Remove gloves carefully without touching the outside with bare hands. The suitability for a specific workplace must be discussed with the manufacturer of the protective gloves. Wash and dry hands.
Use close-fitting safety glasses (EN 166). A full face shield and protective suit should be worn in case of exceptional processing problems.
Respiratory protection not required. In case of annoying exposure, use type ABEK gas masks.
Use impermeable protective clothing resistant to this product. The choice of specific items such as face mask, gloves, boots, apron or full suit depends on the work.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Iso Glass 10?
The signal word is warning.
What is the physical form of Iso Glass 10?
Iso Glass 10 is a vloeibaar . It has kenmerkend odor.
What is Iso Glass 10 used for?
Reinigingsmiddel (AISE_SUMI_PW_8_1_G // AISE_SUMI_PW_10_1 // AISE_SUMI_PW_11_1 // AISE_SUMI_PW_19_1)
What are the hazard statements for Iso Glass 10?
This substance has 1 hazard statement:
- H319: Veroorzaakt ernstige oogirritatie.
What is the melting point of Iso Glass 10?
The melting point is 0 C and the boiling point is 82 C 173 C.