Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ECO Sanitary 2
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sanitairreiniger voor professioneel gebruik
Manufacturers & Suppliers
Greenspeed
manufacturer
P.O.Box 1250 2280 CG Rijswijk (ZH), NL
+31703458737
http://www.greenspeed.eu/
Emergency Contacts
Emergency Contact
+32 70 245 245
Emergency Contact
+31 30 274 88 88
Emergency Contact
+ 33 (0)1 45 42 59 59
Emergency Contact
(+352) 8002-5500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Citroenzuur EC: 201-069-1 | 77-92-9 | 4% | Yes |
| C8-10 D-glucoside EC: 500-220-1 | 68515-73-1 | 4% | Yes |
Notes
Voor de volledige tekst van de H-zinnen die worden genoemd in deze rubriek, zie rubriek 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Bij ernstige of aanhoudende stoornissen: frisse lucht, rust en arts waarschuwen.
Spoelen met water.
Eerst spoelen met veel water, dan zonodig naar arts vervoeren.
Symptoms: roodheid, pijn, slecht zien
Eerst spoelen met veel water, dan zonodig naar arts vervoeren.
Symptoms: diarree, hoofdpijn, buikkrampen, slaperigheid, braken
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Sufficient exhaust ventilation.
Handle with nitrile gloves (EN 374). Minimum breakthrough time of > 480 minutes, thickness 0.35mm. Inspect gloves thoroughly before use. Remove gloves carefully without touching the outer surface with bare hands. The suitability for a specific workplace must be discussed with the protective glove manufacturer.
Close-fitting safety goggles. A face shield and protective suit should be worn in case of exceptional processing problems.
Respiratory protection not needed. In case of annoying exposure, use type ABEK gas masks.
Impermeable clothing. The type of protective equipment depends on the concentration and quantity of hazardous substances at the respective workplace.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- niet van toepassing
- Shipping Name
- Niet onderworpen aan ADR, IMDG, ICAO/IATA
- Transport Class
- niet van toepassing
- Packing Group
- niet van toepassing
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ECO Sanitary 2?
The signal word is no signal word.
What is the physical form of ECO Sanitary 2?
ECO Sanitary 2 is a vloeibaar . It has kenmerkend odor.
What is ECO Sanitary 2 used for?
Sanitairreiniger voor professioneel gebruik
What is the melting point of ECO Sanitary 2?
The melting point is 0 C and the boiling point is 78 C 245 C.