Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Formol -Formaldehyde 4%
- Product Code
- SL.FORP.XX/XX
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 3C00-509N-D001-G8GA
Identified Uses
In-vitrodiagnosticum (IVD), Reagens voor analyse
Uses advised against
Niet bestemd voor huishoudelijk gebruik
Manufacturers & Suppliers
Yvsolab NV
distributor
Veedijk 33, 2300 TURNHOUT (BELGI)
+32 (0) 14 67 27 79
Emergency Contacts
Antigifcentrum
070/245.245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inademen: frisse lucht. Direct een arts waarschuwen. Bij ademstilstand: Meteen mechanische beademing, eventueel zuurstof toedienen.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Een arts raadplegen.
Na oog contact: uitspoelen met ruim voldoende water. Oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Medical Treatment
Geen gegevens beschikbaar
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Specific hand protection requirements for full contact: Material: Nitrile rubber, Minimum layer thickness: 0.11 mm, Breakthrough time: > 480 min, Tested material: KCL 741 Dermatril L. For splash contact: Material: Nitrile rubber, Minimum layer thickness: 0.11 mm, Breakthrough time: > 480 min, Tested material: KCL 741 Dermatril L. Recommendations are specific to the product and applications mentioned in the safety data sheet. For other conditions or mixtures, contact the supplier of CE-approved gloves (e.g., KCL GmbH). Standards mentioned: EN 16523-1.
Use face and/or eye protection tested and approved by official institutions such as NIOSH (US) or EN166 (EU). Safety glasses are required.
Respiratory protection is needed if vapors/aerosols are formed. Recommendations for respiratory protection filtering are based on standards: DIN EN 143, DIN 14387, and other applicable standards for the respiratory protection system used. Recommended filter type: Filter type ABEK. The employer must ensure that maintenance, cleaning, and testing of respiratory protection devices are carried out according to the supplier's instructions and thoroughly documented.
Protective clothing is required.
Do not allow product to enter the sewage system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Formol -Formaldehyde 4%?
The signal word is danger.
What is the physical form of Formol -Formaldehyde 4%?
Formol -Formaldehyde 4% is a vloeibaar with kleurloos color. It has kenmerkend odor.
What is Formol -Formaldehyde 4% used for?
In-vitrodiagnosticum (IVD), Reagens voor analyse
What are the hazard statements for Formol -Formaldehyde 4%?
This substance has 5 hazard statements:
- H302: Schadelijk bij inslikken.
- H317: Kan een allergische huidreactie veroorzaken.
- H332: Schadelijk bij inademing.
- H341: Verdacht van het veroorzaken van genetische schade.
- H350: Kan kanker veroorzaken.
What is the melting point of Formol -Formaldehyde 4%?
The melting point is Geen gegevens beschikbaar and the boiling point is circa100 bij 1.013 hPa.