Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Industrielak
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Niet relevant (mengsel)
- UFI Code
- WC00-509P-400H-GJH4
Identified Uses
Coating en verf, Professioneel gebruik
Manufacturers & Suppliers
Vibol N.V.
manufacturer
Nijverheidslaan 45-47, 8560 Gullegem, België
+32 56 321 521
https://www.vibol.be
Emergency Contacts
Informatiedienst voor noodgevallen
+32 56 321 521
Ma-Vr 09:00 tot 17:00 uur
Antigifcentrum / Centre Antipoisons / Gift-Notruf
070 245 245
24/7 bereikbaar / accessible / erreichbar
NL, EN, DE
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS08
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Het product bevat geen additionele inhoudsstoffen die zijn ingedeeld volgens de huidige kennis van de leverancier en bijdragen aan de indeling van het product en daarom in deze sectie vermeld moeten worden.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Koolwaterstoffen, C9C12, n-alkanen, isoalkanen, cyclische stoffen, aromaten (2 - 25%) EC: 919-446-0 | --- | 10 - 25% | Yes |
| xyleen EC: 215-535-7 | 1330-20-7 | 10 - 25% | Yes |
| 1,2-xylene; 1,3-xylene; 1,4-xylene; ethylbenzene EC: 905-588-0 | --- | 5 - 10% | Yes |
| ethylbenzeen EC: 202-849-4 | 100-41-4 | 1 - 5% | Yes |
| Koolwaterstoffen, C10C13, n-alkanen, isoalkanen, cyclische stoffen, <2% aromaten EC: 918-481-9 | --- | 1 - 5% | Yes |
| Calcium bis(2-ethylhexanoate) EC: 205-249-0 | 136-51-6 | 1 - 5% | Yes |
| Cobalt(II) 2-ethylhexanoate EC: 205-250-6 | 136-52-7 | 1% | Yes |
| 2-ethylhexanoic acid, zirconium salt EC: 245-018-1 | 22464-99-9 | 1% | Yes |
| (2-methoxymethylethoxy)propanol EC: 252-104-2 | 34590-94-8 | 1% | No |
Notes
Alle vermelde percentages zijn gewichtspercentages tenzij anders vermeld.
First Aid Measures
Emergency procedures for chemical exposure incidents
Voor verse lucht zorgen. Bij onregelmatige ademhaling of ademstilstand direct een arts raadplegen en eerste hulp toedienen. In geval van irritatie aan de luchtwegen, een arts raadplegen.
Symptoms: irritatie aan de luchtwegen
Met veel water en zeep wassen. Een ANTIGIFCENTRUM/arts raadplegen.
Minstens 15 minuten met schoon, vloeiend water spoelen terwijl de oogleden worden opengehouden. Contactlenzen verwijderen, indien mogelijk. Blijven spoelen. Een ANTIGIFCENTRUM/arts raadplegen.
Mond met water spoelen (alleen als de persoon bij bewustzijn is). GEEN braken opwekken. Onmiddellijk een ANTIGIFCENTRUM/arts raadplegen. Bij onwel voelen een ANTIGIFCENTRUM of een arts raadplegen.
Immediate Medical Attention
Bij onregelmatige ademhaling of ademstilstand direct een arts raadplegen en eerste hulp toedienen. Onmiddellijk een ANTIGIFCENTRUM/arts raadplegen. Bij onwel voelen een ANTIGIFCENTRUM of een arts raadplegen. Voor specialistisch advies dient de arts contact op te nemen met het antigifcentrum.
Medical Treatment
Voor specialistisch advies dient de arts contact op te nemen met het antigifcentrum.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General ventilation.
Wear suitable gloves. Determine leak tightness/impermeability before use. It is recommended to check the chemical resistance of the aforementioned safety gloves with the glove supplier for special applications. Gloves tested according to EN 374 against chemicals are suitable. The choice of a suitable glove depends not only on the material but also on other quality characteristics and varies from manufacturer to manufacturer. Since the product is composed of multiple substances, the durability of the glove materials cannot be calculated in advance and must therefore be tested before use. Material type: Nitrile rubber. Material thickness: Use gloves with a minimum material thickness: 0.38 mm. Breakthrough time of the glove material: Use gloves with a minimum breakthrough time of the glove material: >480 minutes (permeation level: 6).
Wear safety glasses with side protection (EN 166).
In case of insufficient ventilation, wear suitable respiratory protection. Full/half/quarter mask (EN 136/140).
Protective clothing (EN 340 & EN ISO 13688).
Take appropriate measures to prevent uncontrolled release into the environment. Avoid the product entering drains, surface water, or groundwater.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- VERF waaronder begrepen verf, lakverf, emaillak, beits, schellakoplossing, vernis, polijstmiddel, vloeibare plamuur, vloeibare lakbasis
- Transport Class
- 3
- Packing Group
- III
Aan de bepalingen voor gevaarlijke goederen (ADR) moet ook in het bedrijf worden voldaan.
Aan de bepalingen voor gevaarlijke goederen (ADR) moet ook in het bedrijf worden voldaan.
Aan de bepalingen voor gevaarlijke goederen (ADR) moet ook in het bedrijf worden voldaan.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Industrielak?
The signal word is danger.
What is the physical form of Industrielak?
Industrielak is a vloeibaar with diverse color. It has kenmerkend odor.
What is the solubility of Industrielak?
niet bepaald
What is Industrielak used for?
Coating en verf, Professioneel gebruik
What are the hazard statements for Industrielak?
This substance has 9 hazard statements:
- H226: Ontvlambare vloeistof en damp.
- H304: Kan dodelijk zijn als de stof bij inslikken in de luchtwegen terechtkomt.
- H315: Veroorzaakt huidirritatie.
- H317: Kan een allergische huidreactie veroorzaken.
- H319: Veroorzaakt ernstige oogirritatie.
- H335: Kan irritatie van de luchtwegen veroorzaken.
- H336: Kan slaperigheid of duizeligheid veroorzaken.
- H372: Veroorzaakt schade aan organen (centraal zenuwstelsel) bij langdurige of herhaalde blootstelling.
- H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of Industrielak?
The melting point is niet bepaald and the boiling point is 136,1 C bij 1.013 mbar berekende waarde, gebaseerd op een bestanddeel van het mengsel.