Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tetrahydrofuraan voor spectroscopie Uvasol®
- Product Code
- 108110
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reagens voor analyse, Oplosmiddel
Manufacturers & Suppliers
Merck KGaA
manufacturer
64271 Darmstadt, Duitsland
+49 6151 72-2440
Emergency Contacts
Merck KGaA
+49 6151 722440
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tetrahydrofuran EC: 203-726-8 | 109-99-9 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
frisse lucht.
met ruime hoeveelheid water afspoelen. Verontreinigde kleding verwijderen.
ooglid open houden en met ruime hoeveelheid water uitspoelen. Oogarts waarschuwen.
slachtoffer veel water laten drinken, arts waarschuwen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
poeder, schuim, sproei water.
Brandbaar. Dampen zwaarder dan lucht. Vormt ontplofbare mengsels met lucht bij omgevingstemperaturen. Pas op voor terugslag van de vlam.
Container afkoelen met sproeiwater vanaf een veilige afstand.
Firefighter Protection
Blijf niet in de gevaarlijke zone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermeiden, houd een veilige afstand en draag geschikte beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Vermijd contact met de stof. Adem geen dampen/aerosolen in. In afgesloten ruimten voor toevoer van frisse lucht zorgen.
Niet in het rioolsysteem weg laten lopen; explosiegevaar!
Met vloeistofabsorberend materiaal, b.v. Chemizorb®, opnemen. Reinig het getroffen oppervlak.
Materials: vloeistofabsorberend materiaal, b.v. Chemizorb®
Related Products
Similar products with comparable safety profiles
Tetrachloorethyleen voor spectroscopie Uvasol®
---
Tetrachloorethyleen voor spectroscopie Uvasol®
CAS: 127-18-4
Diethylether voor spectroscopie Uvasol®
CAS: 60-29-7
Dimethylsulfoxide voor spectroscopie Uvasol®
---
Tetrachloorkoolstof voor spectroscopic Uvasol®
---
Tetrahydrofuraan voor vloeistofchromatografie LiChrosolv®
CAS: 109-99-9
Tetrahydrofuraan voor analyse EMPARTA® ACS
CAS: 109-99-9
Tetrahydrofuraan ≥99,5 %, gestabiliseerd, voor synthese
CAS: 109-99-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Verwijderd houden van ontstekingsbronnen. Maatregelen treffen om ontladingen van statische electriciteit te voorkomen.
Gesloten verpakking op een goed geventileerde plaats verwijderd van ontstekingsbronnen en hitte. Bij +15°C tot +25°C. Beschermd tegen licht.
Verwijderd houden van ontstekingsbronnen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Bij sproe contact: Handschoen materiaal: Butyl rubber, Dikte van de laag: 0.7 mm, Doorbraaktijd: > 10 Min. De te gebruiken beschermende handschoenen, moeten voldoen aan de specificaties van EG regeling 89/686/EEG en de daaruit voortkomende norm EN374, bij voorbeeld KCL 898 Butoject® (spat contact).
Bescherming van de ogen: benodigd
Bescherming van de ademhalingswegen: nodig indien dampen/aerosolen gevormd worden. Filter A (volgens DIN 3181) voor dampen van organische verbindingen
Het soort lichaamsbescherming moet al naargelang van de concentratie en de hoeveelheid gevaarlijke stoffen op de werkplek gekozen worden. Antistatisch beschermende kleding.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Ontplofbaar met lucht in damp/gasvormige staat
Met de volgeden stoffen bestaat gevaar voor explosie en/of toxische gasvorming: alkalihydroxiden, hydriden, lucht / zuurstof, oxiderend middel, broom.
Verwarmend.
alkalihydroxiden, hydriden, lucht / zuurstof, oxiderend middel, broom, verscheidene plastics, rubber, tin.
peroxiden
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Chemicaliën moeten met inachtneming van de desbetreffende nationale voorschriften afgevoerd worden. Onder www.retrologistik.de vindt u zowel de landen- en stofspecifieke informatie als de contact partners.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2056
- Shipping Name
- TETRAHYDROFURAN
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Etikettering volgens EG richtlijnen
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tetrahydrofuraan voor spectroscopie Uvasol®?
The signal word is no signal word.
What is the physical form of Tetrahydrofuraan voor spectroscopie Uvasol®?
Tetrahydrofuraan voor spectroscopie Uvasol® is a vloeibaar with kleurloos color. It has etherachtig odor.
What is Tetrahydrofuraan voor spectroscopie Uvasol® used for?
Reagens voor analyse, Oplosmiddel
What are the hazard statements for Tetrahydrofuraan voor spectroscopie Uvasol®?
This substance has 3 hazard statements:
- EUH019: Kan ontplofbare peroxiden vormen.
- Licht ontvlambaar.
- Irriterend voor de ogen en de ademhalingswegen.
What is the melting point of Tetrahydrofuraan voor spectroscopie Uvasol®?
The melting point is -108.5 °C and the boiling point is 65-66 °C.