NextSDS Logo
Safety Data Sheet NL

N-Methylaniline

CAS 100-61-8
EC 202-870-9

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
N-Methylaniline
Product Code
126270000; 126270010; 126270025; 126275000
Chemical Name
N-Methylaniline
Synonyms
Monomethylaniline

Regulatory Identifiers

CAS Number
100-61-8 Check regulations →
EC Number
202-870-9 Check regulations →

Identified Uses

Laboratoriumchemicaliën.

Uses advised against

Geen gegevens beschikbaar

Manufacturers & Suppliers

T

Thermo Fisher Scientific

manufacturer

Janssen Pharmaceuticalaan 3a, 2440 Geel, Belgium

F

Fisher Scientific UK

distributor

Bishop Meadow Road, Loughborough, Leicestershire LE11 5RG, United Kingdom

Emergency Contacts

Nationale Vergiftigingen Informatie Centrum (NVIC)

+31 (0)88 755 8000

België noodnummer

070 245 245

24u/7d

Telefoonnummer voor noodgevallen, Europa

+32 14 57 52 99

Telefoonnummer voor noodgevallen, VS

201-796-7100

Telefoonnummer CHEMTREC, VS

001-800-424-9300

Telefoonnummer CHEMTREC, Europa

001-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 3 H301
Acute Tox. Cat. 3 H311
Acute Tox. Cat. 3 H331
STOT RE Cat. 2 H373
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS08 - Serious health hazard

GHS08

GHS09 - Environmental hazard

GHS09

GHS06 - Acute toxicity

GHS06

Hazard Statements

H301 Giftig bij inslikken, bij contact met de huid en bij inademing
H311 Giftig bij inslikken, bij contact met de huid en bij inademing
H331 Giftig bij inslikken, bij contact met de huid en bij inademing
H373 Kan schade aan organen veroorzaken bij langdurige of herhaalde blootstelling
H410 Zeer giftig voor in het water levende organismen, met langdurige gevolgen

Precautionary Statements

P260 Stof/rook/gas/nevel/damp/spuitnevel niet inademen
P273 Voorkom lozing in het milieu
P280 Beschermende handschoenen/beschermende kleding/oogbescherming/gelaatsbescherming dragen
P302+P350 BIJ CONTACT MET DE HUID: voorzichtig wassen met veel water en zeep
P304+P340 NA INADEMING: het slachtoffer in de frisse lucht brengen en laten rusten in een houding die het ademen vergemakkelijkt
P312 Bij onwel voelen een ANTIGIFCENTRUM of een arts raadplegen

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
N-Methylaniline EC: 202-870-9 100-61-8 99% Yes

Notes

Zie Rubriek 16 voor de volledige tekst van gevarenaanduidingen

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Het slachtoffer in frisse lucht brengen. Als het slachtoffer niet ademt, kunstmatige beademing toepassen. Geen mond-op-mond beademing toepassen als het slachtoffer de stof heeft ingeslikt of ingeademd; kunstmatige beademing toepassen met behulp van een masker dat is uitgerust met een nrichtingsventiel of een ander correct medisch beademingsapparaat. Onmiddellijke medische verzorging is vereist.

Skin contact

Onmiddellijk afspoelen met veel water gedurende minstens 15 minuten. Onmiddellijke medische verzorging is vereist.

Eye contact

Onmiddellijk spoelen met veel water, ook onder de oogleden, gedurende minstens 15 minuten. Bij aanraking met de ogen onmiddellijk met overvloedig water afspoelen en deskundig medisch advies inwinnen.

Ingestion

GEEN braken opwekken. Onmiddellijk contact opnemen met een arts of een vergiftigingencentrum.

Immediate Medical Attention

Onmiddellijke medische verzorging is vereist.

Medical Treatment

De symptomen behandelen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Zorgen voor voldoende ventilatie, met name in besloten ruimten. Zorgen voor oogdouches en veiligheidsdouches vlakbij de werkplek. Gebruik explosiebeveiligde elektrische/verlichting/apparatuur. Waar mogelijk moeten technische beheersmaatregelen worden toegepast om emissie van gevaarlijke stoffen bij de bron te voorkomen. Voorbeelden van technische beheersmaatregelen zijn: isolatie of afsluiting van het proces, het aanbrengen van wijzigingen in het proces of de apparatuur om emissie of contact te minimaliseren, en het gebruik van goed ontworpen afzuigsystemen

Hands

Beschermende handschoenen (EU-norm EN 374). Getest onder EN374-3 voor weerstand tegen permeatie van chemicaliën. Aanbevolen materialen: Butylrubber (doorbraaktijd: > 480 minuten, dikte: 0.64 mm), Viton (R) (doorbraaktijd: > 480 minuten, dikte: 0.70 mm). Neopreen handschoenen (doorbraaktijd: < 30 minuten, dikte: 0.45 mm). Inspecteer handschoenen voor gebruik en neem de voorschriften in acht over doorlaatbaarheid en doordrenkingstijd van de leverancier. Zorg ervoor dat handschoenen geschikt zijn voor de taak (chemische compatibiliteit, behendigheid, operationele voorwaarden) en rekening houdend met specifieke plaatselijke gebruiksomstandigheden (gevaar voor insnijdingen, slijtage, aanraking). Verwijder handschoenen zorgvuldig om huidcontaminatie te voorkomen.

Eyes

Stofbril (EU-norm - EN 166)

Respiratory

Wanneer werknemers worden blootgesteld aan concentraties boven de blootstellingsgrens moeten ze geschikte, goedgekeurde ademhalingsbeschermingsmiddelen dragen. Om de drager te beschermen, moet de ademhalingsbescherming goed passen en op de juiste wijze worden gebruikt en onderhouden. Grootschalige / gebruik in noodgevallen: Gebruik een volgens NIOSH/MSHA of Europese Richtlijn EN 136 goedgekeurd gasmasker wanneer de limieten voor blootstelling worden overschreden of wanneer irritatie of andere symptomen optreden. Aanbevolen filtertype: Ammoniak en organische ammoniak derivaten filter Type K Groen of Organische gassen en dampen filter Type A Bruin volgens EN14387. Kleinschalige / Laboratorium gebruik: Gebruik een volgens NIOSH/MSHA of Europese Richtlijn EN 149:2001 goedgekeurd gasmasker wanneer de limieten voor blootstelling worden overschreden of wanneer irritatie of andere symptomen optreden. Aanbevolen half masker: Valve filtering: EN405; of; Halfgelaatsmasker: EN140; plus filter, NL141. Wanneer RPE wordt gebruik gemaakt van een gezichtsmasker Fit test moet worden uitgevoerd.

Skin/Body

Kleding met lange mouwen.

Environmental

Voorkomen dat product in afvoeren komt. Laat product niet het grondwater verontreinigen. Lokale autoriteiten moeten worden ingelicht indien aanzienlijke gemorste hoeveelheden niet kunnen worden beheerst.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Pressure
0.4 mbar @ 20 C
Dynamic Viscosity
---
Relative Evaporation Rate
---
Physical State Data
liquid
Colour
Donkergeel
Colour Intensity
---
Kinematic Viscosity
---
Crystallisation Point
---
Bulk Density
Niet van toepassing Vloeistof
Auto Ignition Temperature
500 C / 932 F
Vapor Density
3.7 (Lucht = 1,0)
Solubility
---
Solidification Point
---
Solubility In Fat
---
Appearance
Donkergeel
Flash Point
86 C / 186.8 F Methode - DIN 51758
Freezing Point
---
Voc Content
---
Lower Explosive Limit
---
State Under Standard Conditions
---
Odor Threshold
Geen gegevens beschikbaar
Density
---
Odor
Ammoniakachtig
Cloud Point
---
Properties Status
---
Solubility In Water
30g/L
Boiling Point
195 C / 383 F @ 760 mmHg
Evaporation Rate
---
Upper Explosive Limit
---
Decomposition Temperature
Geen gegevens beschikbaar
Relative Density
0.987
Melting Point
-57 C / -70.6 F
Molecular Weight
107.15
Partition Coefficient
N-Methylaniline 1.82
Ph
7.6 1 g/l aq.sol
Metal Corrosion
---
Explosive Limits
---
Flammability
Brandbare vloeistof Op basis van testgegevens
Form
---
Softening Point
Geen gegevens beschikbaar
Physical State
Vloeistof
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2294
Shipping Name
N-METHYLANILINE
Transport Class
6.1
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is N-Methylaniline known by?

N-Methylaniline is also known as: Monomethylaniline

What is the hazard signal word for N-Methylaniline?

The signal word is danger.

What is the physical form of N-Methylaniline?

N-Methylaniline is a vloeistof appearing as donkergeel with donkergeel color. It has ammoniakachtig odor.

What is N-Methylaniline used for?

Laboratoriumchemicaliën.

What are the hazard statements for N-Methylaniline?

This substance has 5 hazard statements:

  • H301: Giftig bij inslikken, bij contact met de huid en bij inademing
  • H311: Giftig bij inslikken, bij contact met de huid en bij inademing
  • H331: Giftig bij inslikken, bij contact met de huid en bij inademing
  • H373: Kan schade aan organen veroorzaken bij langdurige of herhaalde blootstelling
  • H410: Zeer giftig voor in het water levende organismen, met langdurige gevolgen

What is the melting point of N-Methylaniline?

The melting point is -57 C / -70.6 F and the boiling point is 195 C / 383 F @ 760 mmHg.