Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- POLYPRO TPP
- Product Code
- TPP 5000-8000
- Chemical Name
- Hydrocarbons, C10-C13, aromatics, < 1% naphthalene
Regulatory Identifiers
- CAS Number
- 64742-94-5 Check regulations →
- EC Number
- 922-153-0 Check regulations →
- REACH No.
- 01-2119451097-39-XXXX
Identified Uses
Reductor. Enkel voor beroepsmatig gebruiker/industrieel gebruiker gebruik.
Uses advised against
Al het dergelijke gebruik wordt niet gespecificeerd in deze paragraaf noch in paragraaf 7.3
Manufacturers & Suppliers
SICO INKS N.V.
manufacturer
Koeweidestraat 27, 1785 Merchtem - Belgium
+32 52 37 31 11
www.sico-inks.com
Emergency Contacts
Anti-Gif
0032 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS09
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Oplosmiddel(en)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C10-C13, aromatics, < 1% naphthalene EC: 922-153-0 | 64742-94-5 | 75 - 100% | Yes |
Notes
Voor meer informatie over het gevaarlijke karakter van de stoffen de epigrafen 8, 11, 12, 15 en 16 raadplegen.
First Aid Measures
Emergency procedures for chemical exposure incidents
de betrokken persoon weghalen uit de zone van blootstelling en hem/haar verse lucht toedienen. Medische hulp inroepen indien de symptomen verergeren of aanhouden.
Symptoms: symptomen van vergiftiging
Verontreinigde kleren en schoen uittrekken, de huid afspoelen of zo nodig de betrokken persoon douchen met veel koud water en neutrale zeep.
Symptoms: aandoening, brand- of vrieswonden, blaren
Spoelen gedurende minstens 15 minuten met overvloedig water op kamertemperatuur. Indien de betrokken persoon contactlenzen draagt, moeten die verwijderd worden op voorwaarde dat ze niet aan de ogen kleven, aangezien dan bijkomende letsels kunnen optreden. In elk geval na het wassen zo snel mogelijk een arts raadplegen met het veiligheidsinformatieblad van het product.
Onmiddellijk medische hulp inroepen en het veiligheidsinformatieblad van dit product tonen. Indien de betrokken persoon toch moet braken zijn/haar hoofd naar voren buigen om inademing van braaksel te voorkomen. De mond en keel spoelen. De betrokken persoon laten rusten.
Symptoms: mond en keel aangetast
Immediate Medical Attention
Medische hulp inroepen in geval van twijfel, rechtstreekse blootstelling aan het chemische product, aanhoudend ongemak, verergerende of aanhoudende symptomen, of enige aandoening. Na oogcontact, zo snel mogelijk een arts raadplegen. Bij inname, onmiddellijk medische hulp inroepen. Toon altijd het veiligheidsinformatieblad van dit product.
Medical Treatment
Niet van toepassing
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
NIET-wegwerphandschoenen voor chemische bescherming. De doorslagtijd ('breakthrough time') aangegeven door de fabrikant moet hoger zijn dan de gebruikstijd van het product. Geen beschermende crèmes gebruiken na het contact van het product met de huid. CEN-normen: EN 374-1:2003, EN 374-3:2003/AC:2006, EN 420:2003+A1:2009.
Gelaatsscherm. Dagelijks reinigen en regelmatig ontsmetten volgens de instructies van de fabrikant. CEN-normen: EN 166:2001, EN 167:2001, EN 168:2001, EN ISO 4007:2012.
Het gebruik van beschermingsmiddelen is nodig in geval van nevelvorming of indien de grenswaarden voor beroepsmatige blootstelling overschreden worden.
Wegwerpkleding voor bescherming tegen chemische gevaren. Gebruik voorbehouden voor het werk. Regelmatig reinigen volgens de instructies van de fabrikant. CEN-normen: EN 13034:2005+A1:2009, EN 168:2001, EN ISO 139821:2004/A1:2010, EN ISO 6529:2001, EN ISO 6530:2005, EN 464:1994. Veiligheidsschoenen tegen chemisch gevaar. De laarzen vervangen bij tekenen van aantasting. CEN-normen: EN ISO 20345:2011, EN 13832-1:2006.
Krachtens de communautaire wetgeving inzake milieubescherming wordt aanbevolen het lozen van het product en storten van zijn verpakking in het milieu te vermijden. Voor bijkomende informatie zie epigraaf 7.1.D.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1210
- Shipping Name
- PRINTING INK RELATED MATERIAL, flammable
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for POLYPRO TPP?
The signal word is danger.
What is the physical form of POLYPRO TPP?
POLYPRO TPP is a vloeibaar appearing as niet beschikbaar with niet beschikbaar color. It has niet beschikbaar odor.
What is the solubility of POLYPRO TPP?
Niet van toepassing *
What is POLYPRO TPP used for?
Reductor. Enkel voor beroepsmatig gebruiker/industrieel gebruiker gebruik.
What are the hazard statements for POLYPRO TPP?
This substance has 2 hazard statements:
- H304: Kan dodelijk zijn als de stof bij inslikken in de luchtwegen terechtkomt
- H411: Giftig voor in het water levende organismen, met langdurige gevolgen
What is the melting point of POLYPRO TPP?
The melting point is -33 C and the boiling point is 273 C.