NextSDS Logo
Safety Data Sheet NL

Isol Foam

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Isol Foam

Regulatory Identifiers

CAS Number
N/A
REACH No.
Niet vandaanalsing (mengsel)

Identified Uses

Polyurethaan

Uses advised against

Geen ontraden gebruiken gekend

Manufacturers & Suppliers

R

Rectavit N.V.

national supplier

Ambachtenlaan 4, B-9080 Lochristi

+32 9 216 85 20

R

Rectavit N.V.

manufacturer

Ambachtenlaan 4, B-9080 Lochristi

+32 9 216 85 20

Emergency Contacts

BIG

+32 14 58 45 45

24u/24u

EN, FR, DE, NL

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosol Cat. 1 H229
Carc. Cat. 2 H351
Acute Tox. Cat. 4 H332
STOT RE Cat. 2 H373
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H335
Skin Irrit. Cat. 2 H315
Resp. Sens. Cat. 1 H334
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS02 - Flammable

GHS02

GHS08 - Serious health hazard

GHS08

GHS07 - Health hazard

GHS07

Hazard Statements

H222 Zeer licht ontvlambare aerosol.
H229 Houder onder druk: kan openbarsten bij verhitting.
H315 Veroorzaakt huidirritatie.
H317 Kan een allergische huidreactie veroorzaken.
H319 Veroorzaakt ernstige oogirritatie.
H332 Schadelijk bij inademing.
H334 Kan bij inademing allergie- of astmasymptomen of ademhalingsmoeilijkheden veroorzaken.
H335 Kan irritatie van de luchtwegen veroorzaken.
H351 Verdacht van het veroorzaken van kanker.
H373 Kan schade aan organen veroorzaken bij langdurige of herhaalde blootstelling bij inademing.

Precautionary Statements

P101 Bij het inwinnen van medisch advies, de verpakking of het etiket ter beschikking houden.
P102 Buiten het bereik van kinderen houden.
P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P211 Niet in een open vuur of op andere ontstekingsbronnen spuiten.
P251 Ook na gebruik niet doorboren of verbranden.
P280 Beschermende handschoenen, beschermende kleding en oogbescherming/gelaatsbescherming dragen.
P410 + P412 Tegen zonlicht beschermen. Niet blootstellen aan temperaturen boven 50 C/122 F.
P501 Inhoud/verpakking afvoeren overeenkomstig de plaatselijke/regionale/nationale/internationale voorschriften.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
polymethyleenpolyfenylisocyanaat 9016-87-9 25 - 50% Yes
isobutaan EC: 200-857-2 75-28-5 1 - 10% Yes
dimethylether EC: 204-065-8 115-10-6 1 - 10% Yes
propaan EC: 200-827-9 74-98-6 1 - 10% Yes
tris(2-chloor-1-methylethyl)fosfaat EC: 237-158-7 13674-84-5 1 - 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Breng het slachtoffer in de frisse lucht. Bij ademhalingsproblemen: arts/medische dienst raadplegen.

Symptoms: Droge keel/keelpijn. Hoesten. Irritatie luchtwegen. Neusslijmvliesirritatie. Lopende neus.

Skin contact

Onmiddellijk met veel water spoelen. Slachtoffer naar arts brengen als irritatie aanhoudt.

Symptoms: Prikkeling/irritatie van de huid.

Eye contact

Onmiddellijk met veel water spoelen. Geen neutralisatiemiddel gebruiken. Slachtoffer naar oogarts brengen als irritatie aanhoudt.

Symptoms: Irritatie van het oogweefsel. Tranenvloed.

Ingestion

Mond spoelen met water. Zo vlug mogelijk na inname: veel water laten drinken. Indien men zich onwel voelt: medische dienst/arts raadplegen.

Symptoms: Niet van toepassing.

Immediate Medical Attention

Indien men zich onwel voelt, arts raadplegen. Bij ademhalingsproblemen: arts/medische dienst raadplegen. Slachtoffer naar arts/oogarts brengen als irritatie aanhoudt.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Vonkvrije, explosieveilige apparatuur/verlichting gebruiken. Verwijderd houden van open vuur/warmte. Verwijderd houden van ontstekingsbronnen/vonken. Regelmatig concentratie in de lucht meten.

Hands

Handschoenen. Materiaalkeuze Doorbraaktijd Dikte LDPE (lagedichtheidpolyethyleen) 10 minuten 0.025 mm - materiaalkeuze (goede bescherming) LDPE (lagedichtheidpolyethyleen).

Eyes

Nauwaansluitende bril.

Respiratory

Gasmasker met filtertype A bij conc. in de lucht > blootstellingsgrenswaarde.

Skin/Body

Hoofd-/halsbescherming. Beschermkleding.

Environmental

Zie rubrieken 6.2, 6.3 en 13

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Kinematic Viscosity
Geen gegevens beschikbaar
Solubility In Fat
---
Relative Evaporation Rate
---
Relative Density
0.99 ; 20 C
Physical State Data
aerosol
Explosive Limits
---
Colour
Kleurvariabel, afhankelijk van de samenstelling
Odor Threshold
Geen gegevens beschikbaar
Colour Intensity
---
State Under Standard Conditions
---
Evaporation Rate
Geen gegevens beschikbaar
Bulk Density
---
Form
---
Freezing Point
---
Voc Content
---
Partition Coefficient
Niet van toepassing (mengsel)
Lower Explosive Limit
---
Dynamic Viscosity
Geen gegevens beschikbaar
Physical State
Arosol
Decomposition Temperature
Geen gegevens beschikbaar
Vapor Density
---
Solubility In Water
niet oplosbaar
Auto Ignition Temperature
Geen gegevens beschikbaar
Cloud Point
---
Metal Corrosion
---
Boiling Point
Geen gegevens beschikbaar
Ph
Geen gegevens beschikbaar
Molecular Weight
---
Crystallisation Point
---
Melting Point
Geen gegevens beschikbaar
Solidification Point
---
Density
990 kg/m ; 20 C
Vapor Pressure
Geen gegevens beschikbaar
Properties Status
---
Softening Point
---
Solubility
water ; niet oplosbaar
Upper Explosive Limit
---
Appearance
Arosol
Odor
Kenmerkende geur
Flammability
Zeer licht ontvlambare aerosol.
Flash Point
Niet van toepassing
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
spuitbussen (arosolen)
Transport Class
2
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Isol Foam?

The signal word is danger.

What is the physical form of Isol Foam?

Isol Foam is a arosol appearing as arosol with kleurvariabel, afhankelijk van de samenstelling color. It has kenmerkende geur odor.

What is the solubility of Isol Foam?

water ; niet oplosbaar

What is Isol Foam used for?

Polyurethaan

What are the hazard statements for Isol Foam?

This substance has 10 hazard statements:

  • H222: Zeer licht ontvlambare aerosol.
  • H229: Houder onder druk: kan openbarsten bij verhitting.
  • H315: Veroorzaakt huidirritatie.
  • H317: Kan een allergische huidreactie veroorzaken.
  • H319: Veroorzaakt ernstige oogirritatie.
  • H332: Schadelijk bij inademing.
  • H334: Kan bij inademing allergie- of astmasymptomen of ademhalingsmoeilijkheden veroorzaken.
  • H335: Kan irritatie van de luchtwegen veroorzaken.
  • H351: Verdacht van het veroorzaken van kanker.
  • H373: Kan schade aan organen veroorzaken bij langdurige of herhaalde blootstelling bij inademing.

What is the melting point of Isol Foam?

The melting point is Geen gegevens beschikbaar and the boiling point is Geen gegevens beschikbaar.