Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CUT+COOL HUILE DE COUPE
- Product Code
- 0893050004
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Corrosieremmer, Product voor professioneel gebruik
Manufacturers & Suppliers
Würth Belux N.V - S.A.
distributor
Everdongenlaan 29, 2300 Turnhout
+32 (0)14 44 55 66
Emergency Contacts
Emergency Contact
+32 (0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Bij inademing overbrengen in de frisse lucht. Medische hulp inroepen.
Bij aanraking met de huid onmiddellijk grondig spoelen met veel water gedurende minstens 15 minuten en ondertussen verontreinigde kleding en schoenen uitdoen. Medische hulp inroepen. Kleding wassen alvorens opnieuw te gebruiken. Schoenen grondig reinigen alvorens opnieuw te gebruiken.
Ogen spoelen met water als voorzorgsmaatregel. Medische hulp inroepen als irritatie optreedt en aanhoudt.
Bij inslikken, NOOIT braken opwekken. Medische hulp inroepen. De mond grondig met water spoelen.
Medical Treatment
Biedt een symptomatische en ondersteunende behandeling.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Minimaliseer blootstelling op de werkplek. Gebruik plaatselijke afzuiging als er geen voldoende afzuiging voorhanden is. Gebruik afzuiging bij informatie over een plaatselijk blootstellingspotentieel alleen op een locatie met explosiebestendige afzuiging.
Materiaal : Nitrilrubber Doorbraaktijd : < 480 min Handschoendikte : 0,45 mm Opmerkingen : Kies handschoenen om contact met de chemische stoffen te vermijden op basis van de concentratie en de hoeveelheid van de gevaarlijke stof op de werkplek. Het is raadzaam de chemicalinbestendigheid van de bovengenoemde veiligheidshandschoenen voor speciale toepassingen te bespreken met de handschoenfabrikant. Handen wassen voor elke werkonderbreking en aan het einde van de werkdag.
Draag de volgende persoonlijke beschermingsuitrusting: beschermbril De uitrusting moet in overeenstemming zijn met NBN EN 166
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 1950
- Packing Group
- Niet toegewezen door regelgeving
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CUT+COOL HUILE DE COUPE?
The signal word is danger.
What is the physical form of CUT+COOL HUILE DE COUPE?
CUT+COOL HUILE DE COUPE is a arosol appearing as arosol with rood bruin color. It has naar bittere amandelen odor.
What is the solubility of CUT+COOL HUILE DE COUPE?
onoplosbaar
What is CUT+COOL HUILE DE COUPE used for?
Corrosieremmer, Product voor professioneel gebruik
What are the hazard statements for CUT+COOL HUILE DE COUPE?
This substance has 4 hazard statements:
- H222: Zeer licht ontvlambare aerosol.
- H229: Houder onder druk: kan open barsten bij verhitting.
- H315: Veroorzaakt huidirritatie.
- H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of CUT+COOL HUILE DE COUPE?
The melting point is Geen gegevens beschikbaar and the boiling point is Niet van toepassing.