NextSDS Logo
Safety Data Sheet NL

Sucrose

CAS 57-50-1

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Sucrose
Product Code
S5016

Regulatory Identifiers

CAS Number
57-50-1 Check regulations →

Identified Uses

Laboratoriumchemikaliën, Vervaardiging van stoffen

Manufacturers & Suppliers

S

Sigma-Aldrich N.V./S.A.

national supplier

K. Cardijnplein 8, B-2880 BORNEM

+32 3 899 1301

Emergency Contacts

Emergency Contact

070 245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
D(+)-Saccharose --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Bij inademen het slachtoffer in de frisse lucht brengen. Als de ademhaling is gestopt kunstmatig beademen.

Skin contact

Afwassen met zeep en veel water.

Eye contact

Ogen spoelen met water als voorzorgsmaatregel.

Ingestion

Nooit een bewusteloos persoon laten drinken (of eten). Mond spoelen met water.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Algemene industrile hygine toepassen.

Hands

Met handschoenen hanteren. Handschoenen voor gebruik goed controleren. Handschoenen netjes uittrekken zonder de buitenkant aan te raken met de blote hand. Gebruikte handschoenen direct weggooien volgens de geldende laboratoriumregels. Was en droog de handen. De gekozen beschermhandschoenen moeten voldoen aan de specificaties van EU-Richtlijn 89/686/EEG en de norm En 374, die daarvan is afgeleid. Bescherming via onderdompeling Materiaal: Nitrilrubber Minimale laagdikte: 0,11 mm Penetratietijd: > 480 min Getest materiaal:Dermatril (Aldrich Z677272, Maat M) Bescherming met waterstraal Materiaal: Nitrilrubber Minimale laagdikte: 0,11 mm Penetratietijd: > 30 min Getest materiaal:Dermatril (Aldrich Z677272, Maat M) bron data: KCL GmbH, D-36124 Eichenzell, Telefoon +49 (0)6659 873000, e-mail sales@kcl.de, test methode: EN374 Bij gebruik in oplossing, of gemengd met andere bestanddelen, of onder omstandigheden anders dan volgens EN 374, eerst contact opnemen met de leverancier van de volgens de EG-richtlijnen goedgekeurde handschoenen. Deze aanbeveling is ter info en moet door de Veiligheidsmanager worden beoordeeld per situatie. Het moet niet gezien worden als directe toestemming voor ieder specifiek gebruiksscenario.

Eyes

Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiele instellingen zoals NIOSH (US) of EN166 (EU).

Respiratory

Gelaatsmasker is niet vereist. Draag bescherming en een stofmasker type N95 (US) of type P1 (EN 143), indien er bepaalde overlast/waarde wordt geconstateerd en/of stofdeeltjes te wensen overlaat. Gebruik ademhalingsmaskers getest en goedgekeurd door officile overheidsinstanties zoals NIOSH (US) of CEN (EU).

Skin/Body

Kies beschermingskleding aan de hand van het type, de hoeveelheid en concentratie van gevaarlijke stoffen, en de specifieke werkplek., Het type beschermingsmiddelen is afhankelijk van de concentratie en hoeveelheid gevaarlijke stoffen op de betreffende werkplek.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flash Point
---
Properties Status
---
Flammability
---
Voc Content
---
Melting Point
185 - 187 C
State Under Standard Conditions
---
Solubility In Fat
---
Density
---
Decomposition Temperature
---
Freezing Point
---
Boiling Point
---
Cloud Point
---
Physical State
solid
Dynamic Viscosity
---
Vapor Pressure
---
Partition Coefficient
---
Relative Density
---
Vapor Density
---
Molecular Weight
---
Evaporation Rate
---
Softening Point
---
Kinematic Viscosity
---
Bulk Density
---
Solubility In Water
342 g/l bij 20 C - volledig oplosbaar
Explosive Limits
---
Metal Corrosion
---
Odor
---
Physical State Data
solid
Lower Explosive Limit
---
Auto Ignition Temperature
---
Relative Evaporation Rate
---
Colour
wit
Appearance
kristallijn
Form
kristallijn
Odor Threshold
---
Upper Explosive Limit
---
Solidification Point
---
Crystallisation Point
---
Ph
5,5 - 7 bij 342 g/l bij 25 C
Solubility
---
Colour Intensity
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
Niet-gevaarlijke goederen
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Sucrose?

The signal word is no signal word.

What is the physical form of Sucrose?

Sucrose is a solid appearing as kristallijn with wit color.

What is Sucrose used for?

Laboratoriumchemikaliën, Vervaardiging van stoffen

What is the melting point of Sucrose?

The melting point is 185 - 187 C .