Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt
- Product Form
- Niet van toepassing
- Product Code
- TRC-D454328-10MG
- Chemical Name
- 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt
Regulatory Identifiers
- CAS Number
- 2839062-01-8 Check regulations →
Identified Uses
Laboratoriumgebruik
Uses advised against
Geen informatie beschikbaar
Manufacturers & Suppliers
LGC GmbH
distributor
Louis-Pasteur-Straße 30, 14943 Luckenwalde, GERMANY
+49(0) 3371 689
http://www.lgcstandards.com
Emergency Contacts
NVIC
+31 (0)88 755 8000
CHEMTREC
(800) 424-9300
CHEMTREC
4001204937
CHEMTREC
(703) 527-3887
Europa
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt | 2839062-01-8 | 100% | No |
Notes
Dit product bevat geen stoffen die mogelijk zeer zorgwekkend zijn in een concentratie >=0,1% (Verordening (EG) nr. 1907/2006 (REACH), Artikel 59).
First Aid Measures
Emergency procedures for chemical exposure incidents
Het slachtoffer in frisse lucht brengen.
Huid wassen met water en zeep. In het geval van huidirritatie of allergische reacties een arts raadplegen.
Grondig spoelen met veel water gedurende minstens 15 minuten, waarbij onderste en bovenste ooglid worden opgetild. Een arts raadplegen.
De mond spoelen.
Immediate Medical Attention
Een arts raadplegen bij oogcontact of in het geval van huidirritatie of allergische reacties.
Medical Treatment
De symptomen behandelen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Blusmaatregelen gebruiken die geschikt zijn voor de plaatselijke omstandigheden en de directe omgeving.
Gemorst product niet verspreiden met hogedruk-waterstralen.
Geen informatie beschikbaar.
WAARSCHUWING: Bij het bestrijden van brand kan het gebruik van waterspray inefficiënt zijn.
Firefighter Protection
Brandweerlieden moeten onafhankelijke ademhalingsapparatuur en volledige brandweeruitrusting dragen. Persoonlijke beschermingsmiddelen gebruiken.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Zie rubriek 12 voor aanvullende ecologische informatie.
Mechanisch oppakken en in geschikte containers plaatsen voor verwijdering.
Related Products
Similar products with comparable safety profiles
2,5-Dihydroxybenzoic acid
CAS: 490-79-9
Benzoic acid, sodium salt
CAS: 532-32-1
sodium 2-methylprop-2-ene-1-sulphonate
CAS: 1561-92-8
2,2-Dimethylbutane
CAS: 75-83-2
Chromotropic acid disodium salt dihydrate
CAS: 5808-22-0
Methyl 4-hydroxybenzoate, sodium salt
CAS: 5026-62-0
Methyl-d3-malonic acid
CAS: 42522-59-8
2,3-Dimethyl-2-butene
CAS: 563-79-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Contact met huid, ogen en kleding vermijden. Draag geschikte handschoenen en een beschermingsmiddel voor de ogen/het gezicht.
Kijk op het certificaat van de producent voor specifieke opslag en transport temperaturen. Bewaar alleen in de originele verpakking tenzij ander advies wordt gegeven op het analysecertificaat.
Niet eten, drinken of roken tijdens het gebruik van dit product. Was de handen vóór pauzes en na het werk.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
De te gebruiken beschermende handschoenen, moeten voldoen aan de specificaties van EG regeling 89/686/EEG en de daaruit voortkomende norm EN374. Beschermende nitrilrubber handschoenen dragen.
Aanraking met de ogen vermijden. Veiligheidsbril met zij-afscherming (of stofbril) dragen.
Bij normaal gebruik zijn geen beschermingsmiddelen vereist. Als blootstellingsgrenswaarden worden overschreden of irritatie optreedt, kan ventilatie en evacuatie noodzakelijk zijn.
Draag geschikte beschermende kleding.
Niet in riool, bodem of waterwegen laten lopen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stabiel onder normale omstandigheden.
Geen informatie beschikbaar.
Geen bij normale verwerking.
Geen bekend op basis van verstrekte informatie.
Geen bekend op basis van verstrekte informatie.
Geen bekend op basis van verstrekte informatie.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Afvoeren in overeenstemming met de plaatselijke regelgeving. Verwijder afval in overeenstemming met de milieuwetgeving.
Afvoeren in overeenstemming met de plaatselijke regelgeving.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Niet gereguleerd
- Shipping Name
- Niet gereguleerd
- Transport Class
- Niet gereguleerd
- Packing Group
- Niet gereguleerd
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Dit veiligheidsinformatieblad is opgesteld overeenkomstig de eisen van: Verordening (EG) nr. 1907/2006 en Verordening (EG) nr. 1272/2008
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt?
The signal word is no signal word.
What is the physical form of 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt?
2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt is a vaste stof appearing as vaste stof with wit, aan, gebroken wit color. It has geen informatie beschikbaar odor.
What is the solubility of 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt?
Enigszins oplosbaar
What is 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt used for?
Laboratoriumgebruik
What is the melting point of 2,3-Dihydroxy-2-methylbutanoic Acid Sodium Salt?
The melting point is > 100 °C and the boiling point is Geen gegevens beschikbaar.