Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2 KOMP STRUKTUUR PART A
- Product Code
- D100051
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lijm
Uses advised against
Geen bekend
Manufacturers & Suppliers
MULTITASK INDUSTRIES
manufacturer
KARNEMELKSTRAAT 12, 9060 ZELZATE / BELGIUM
+32 (0)9 282 43 61
http://www.multitaskindustries.be
Emergency Contacts
Adviesorgaan
+32 (0)70 245 245
24h
Onderneming
+32 (0)9 2824361
Ma-Vr 8:00 – 17:00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methylmethacrylaat EC: 201-297-1 | 80-62-6 | 50 - 70% | Yes |
| Urethaan methacrylaat oligomeer | --- | 1 - 10% | Yes |
| Methacrylzuur EC: 201-204-4 | 79-41-4 | 1 - 10% | Yes |
| P-tolueensulfonylchloride EC: 202-684-8 | 98-59-9 | 1 - 5% | Yes |
| Butylhydroxytoluene EC: 204-881-4 | 128-37-0 | 1 - 2.5% | Yes |
| α, α-dimethylbenzylhydroperoxide EC: 201-254-7 | 80-15-9 | 1 - 2.5% | Yes |
| Trimethylolpropaan polyoxyethylen triacrylaat EC: 500-066-5 | 28961-43-5 | 0.1 - 1% | Yes |
Notes
SVHC Lijst (Candidate List of Substances of Very High Concern for authorisation): Bevat geen of minder dan 0,1% van de opgesomde stoffen. De woordelijke inhoud van de opgegeven aanwijzingen inzake de mogelijke gevaren is te vinden in RUBRIEK 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Voor frisse lucht zorgen. Bij klachten onder medische behandeling stellen.
Na aanraking met de huid onmiddellijk wassen met veel water en zeep. Bij aanhoudende huidirritatie, arts raadplegen.
Voorzichtig afspoelen met water gedurende een aantal minuten; Contactlenzen verwijderen, indien mogelijk; blijven spoelen. Bij aanhoudende oogirritatie: een arts raadplegen.
Onmiddellijk een arts raadplegen. Geen braken opwekken. Mond spoelen en vervolgens veel water drinken.
Immediate Medical Attention
Onmiddellijk een arts raadplegen.
Medical Treatment
Symptomatisch behandelen. Veiligheidsinformatieblad de arts ter beschikking stellen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Kooldioxide, watersproeistraal, bluspoeder en schuim.
Volle waterstraal.
Gevaar voor vorming van toxische pyrolyseproducten.
Aan hitte blootgestelde recipiënten met watersproeistraal afkoelen.
Firefighter Protection
Een autonoom ademhalingstoestel dragen.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Verspreiding over water/bodem verhinderen (b.v. indammen of oliedam aanleggen). Niet in de riolering/oppervlaktewateren/grondwater laten terechtkomen.
Met absorberend materiaal opnemen.
Materials: zand, zaagsel, universele absorbens, kiezelgoer
Related Products
Similar products with comparable safety profiles
STRUCTUURMAT / LAQUE STRUCURE MATE
---
Refug 2K Komponente A
---
2K BETONVULLER POWER PREMIUM Component A
UFI: EKMK-MUMQ-RC0A-NJSU
VORMENREIN K
---
FORMIER 1, FORMIER 5
---
WOODREPAIR 2 KOMPONENTEN
---
Refug 2K Komponente B
---
3302 CombiPrimer Hechtgrondlaag
UFI: KU20-U0A4-H00Q-NJ9Y
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Voor een goede ventilatie zorgen, ook langs de vloer (dampen zijn zwaarder dan lucht). Maatregelen treffen tegen elektrostatische oplading. Verwijderd houden van ontstekingsbronnen – Niet roken. Dampen kunnen met lucht een ontplofbaar mengsel vormen. Niet eten, drinken of roken tijdens het gebruik van dit product.
Uitsluitend in de oorspronkelijke verpakking bewaren. Niet samen met oxydatiemiddelen opslaan. Verpakking hermetisch gesloten houden. Reservoirs op een goed geventileerde plaats bewaren. Blootstelling aan licht vermijden. Tegen opwarming/oververhitting beschermen.
Verontreinigde werkkleding mag de werkruimte niet verlaten. Voor de pauze en na afloop van het werk handen wassen. Huid preventief beschermen met huidbeschermende zalf. Verontreinigde kleding uittrekken en wassen alvorens deze opnieuw te gebruiken.
Maatregelen treffen tegen elektrostatische oplading. Verwijderd houden van ontstekingsbronnen – Niet roken.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Zorg voor een adequate ventilatie op de werkplek.
In de informatie gaat het om aanbevelingen. Neem voor bijkomende inlichtingen contact op met de handschoenleverancier. Bij vol contact: Butyl rubber, >480 min (EN 374). Bij sprei contact: Butyl rubber, >60 min (EN 374).
Veiligheidsbril.
Adembescherming bij hoge concentraties. Kortstondig filterapparaat, filter A.
Lichte beschermkledij uit kunststof. Het soort lichaamsbescherming moet al naargelang van de concentratie en de hoeveelheid gevaarlijke stoffen op de werkplek gekozen worden. De chemische weerstand van de bescherming moet met de leverancier geregeld worden.
Zie rubriek 6+7.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stabiel onder normale omgevingsomstandigheden (kamertemperatuur).
Zie RUBRIEK 10.3.
Vorming van ontvlambare mengsels mogelijk in lucht bij opwarming boven het vlampunt en/of bij het verstuiven of vernevelen. Reacties met reductiemiddelen, zware metalen. Reacties met sterke oxydatiemiddelen.
Sterke verhitting.
Zie RUBRIEK 7.
Ontvlambare gassen/dampen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Productresten dienen te worden afgevoerd met inachtneming van de Richtlijn betreffende afvalstoffen 2008/98/EG alsook volgens nationale en regionale voorschriften.
Als gevaarlijk afval afvoeren. Met inachtneming van de plaatselijke wettelijke voorschriften naar een verbrandingsinstallatie afvoeren.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2924
- Shipping Name
- BRANDBARE VLOEISTOF, BIJTEND, N.E.G. (Methylmethacrylaat, Methacrylzuur)
- Transport Class
- 3 & 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
EEG-VOORSCHRIFTEN: 1967/548 (1999/45); 1991/689 (2001/118); 1999/13; 2004/42; 648/2004; 1907/2006 (Reach); 1272/2008; 75/324/EEG (2008/47/EG); 453/2010/EG
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 2 KOMP STRUKTUUR PART A?
The signal word is danger.
What is the physical form of 2 KOMP STRUKTUUR PART A?
2 KOMP STRUKTUUR PART A is a gel with witachtig color. It has karakteristiek odor.
What is 2 KOMP STRUKTUUR PART A used for?
Lijm
What are the hazard statements for 2 KOMP STRUKTUUR PART A?
This substance has 5 hazard statements:
- H225: Licht ontvlambare vloeistof en damp.
- H314: Veroorzaakt ernstige brandwonden en oogletsel.
- H317: Kan een allergische huidreactie veroorzaken.
- H335: Kan irritatie van de luchtwegen veroorzaken.
- H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of 2 KOMP STRUKTUUR PART A?
The melting point is Niet bepaald and the boiling point is Niet bepaald.