NextSDS Logo
Safety Data Sheet NL

MOTIP POLYESTER PLAMUUR

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MOTIP POLYESTER PLAMUUR
Product Code
000051 (250 gr) 000052 (1.000 gr) 000055 (2.000 gr) 000098 (500 gr)

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Plamuur

Uses advised against

Geen verdere relevante informatie verkrijgbaar.

Manufacturers & Suppliers

M

MOTIP DUPLI B.V.

manufacturer

Wolfraamweg 2, NL-8471 XC Wolvega, Nederland

+31 (0)561 694400

Emergency Contacts

Emergency Contact

+31 (0)561-694400

tijdens kantooruren

NVIC

030-2748888

24 uur per dag

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3 H226
Repr. Cat. 2 H361d
STOT RE Cat. 1 H372
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Ontvlambare vloeistof en damp.
H315 Veroorzaakt huidirritatie.
H319 Veroorzaakt ernstige oogirritatie.
H361d Wordt ervan verdacht het ongeboren kind te schaden.
H372 Veroorzaakt schade aan de gehoororganen bij langdurige of herhaalde blootstelling.

Precautionary Statements

P101 Bij het inwinnen van medisch advies, de verpakking of het etiket ter beschikking houden.
P102 Buiten het bereik van kinderen houden.
P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P260 Stof/rook/gas/nevel/damp/spuitnevel niet inademen.
P280 Beschermende handschoenen/beschermende kleding/oogbescherming/gelaatsbescherming dragen.
P314 Bij onwel voelen een arts raadplegen.
P501 De inhoud en de verpakking verwerken volgens de plaatselijke voorschriften.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mengsel van na elkaar aangevoerde stoffen met ongevaarlijke bijmengingen.

Chemical Name CAS Number Concentration Hazardous
styreen EC: 202-851-5 100-42-5 10 - 12.5% Yes

De woordelijke inhoud van de opgegeven aanwijzingen inzake de mogelijke gevaren is te vinden in hoofdstuk 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Frisse lucht toedienen; bij klachten arts ontbieden.

Skin contact

Over het algemeen is het product niet prikkelend voor de huid.

Eye contact

Ogen bij geopend ooglid meerdere minuten met stromend water spoelen.

Ingestion

Drink zeer veel water en voer verse lucht aan. Onmiddellijk een dokter waarschuwen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, bluspoeder of waterstraal. Grotere brand met waterstraal bestrijden of met schuim, dat tegen alcohol bestand is.

Unsuitable media

Water, Krachtige waterstraal

Specific hazards

Geen verdere relevante informatie verkrijgbaar.

Firefighter Protection

Speciale beschermende kleding: Geen bijzondere maatregelen nodig.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Niet in de riolering/het oppervlaktewater/het grondwater laten terechtkomen.

Cleanup methods

Met vloeistofbindend materiaal opnemen. Niet met water of waterachtige reinigingsmiddelen wegspoelen.

Materials: zand, bergmeel, zuurbinder, universele binder, zaagmeel

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Voor goede ventilatie/afzuiging op de werkplaatsen zorgen.

Storage

Geen bijzondere eisen.

Fire prevention

Onstekingsbronnen op afstand houden - niet roken.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Niet noodzakelijk. Handschoenmateriaal: Niet noodzakelijk. Doordringingstijd van het handschoenmateriaal: Niet noodzakelijk.

Eyes

Bij het omgieten is het gebruik van een veiligheidsbril aan te bevelen.

Respiratory

Bij korte of geringe belasting ademfiltertoestel; bij intensieve resp. langdurige expositie een van de omringende lucht onafhankelijk ademhalingstoestel gebruiken.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Partition Coefficient
Niet bepaald.
Odor Threshold
Niet bepaald.
Odor
Karakteristiek
Vapor Pressure
6 hPa
Solidification Point
---
Appearance
Grijs
Flammability
Niet bruikbaar.
Explosive Limits
---
Kinematic Viscosity
Niet bepaald.
Properties Status
---
Ph
Niet bepaald.
Vapor Density
Niet bepaald.
Melting Point
Niet bepaald.
Decomposition Temperature
Niet bepaald.
Voc Content
240,0 g/l
Colour Intensity
---
Boiling Point
145 °C
Upper Explosive Limit
8,9 Vol %
Flash Point
31 °C
Solubility
---
Cloud Point
---
Lower Explosive Limit
1,2 Vol %
Bulk Density
---
Solubility In Fat
---
Metal Corrosion
---
Solubility In Water
Niet resp. gering mengbaar.
Relative Density
Niet bepaald.
Softening Point
---
Physical State
Pasteus
Relative Evaporation Rate
---
Density
1,92 g/cm³
Colour
Grijs
Crystallisation Point
---
Auto Ignition Temperature
480 °C
Evaporation Rate
Niet bepaald.
Freezing Point
---
Dynamic Viscosity
Niet bepaald.
Molecular Weight
---
State Under Standard Conditions
---
Physical State Data
liquid
Form
Pasteus
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Geen afbraak bij gebruik volgens voorschrift.

Hazardous reactions

Geen gevaarlijke reacties bekend.

Avoid

Geen verdere relevante informatie verkrijgbaar.

Incompatible

Geen verdere relevante informatie verkrijgbaar.

Decomposition

Geen gevaarlijke ontbindingsproducten bekend.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxiciteit

Aquatische toxiciteit: Geen verdere relevante informatie verkrijgbaar.

12.2 Persistentie en afbreekbaarheid

Geen verdere relevante informatie verkrijgbaar.

12.3 Bioaccumulatie

Geen verdere relevante informatie verkrijgbaar.

12.4 Mobiliteit in de bodem

Geen verdere relevante informatie verkrijgbaar.

12.5 Resultaten van PBT- en zPzB-beoordeling

PBT: Niet bruikbaar. zPzB: Niet bruikbaar.

12.6 Andere schadelijke effecten

Geen verdere relevante informatie verkrijgbaar.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Mag niet tezamen met huisvuil gestort worden of in de riolering terechtkomen.

Waste Codes

08 04 09* afval van lijm en kit dat organische oplosmiddelen of andere gevaarlijke stoffen bevat EWC
15 01 04 metalen verpakking EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3269
Shipping Name
POLYESTERHARS-KIT, Mengsel
Transport Class
3
Packing Group
III
ADR

Waarschuwing: Brandbare vloeistoffen

IMDG

Waarschuwing: Brandbare vloeistoffen

IATA

Waarschuwing: Brandbare vloeistoffen

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MOTIP POLYESTER PLAMUUR?

The signal word is danger.

What is the physical form of MOTIP POLYESTER PLAMUUR?

MOTIP POLYESTER PLAMUUR is a pasteus appearing as grijs with grijs color. It has karakteristiek odor.

What is MOTIP POLYESTER PLAMUUR used for?

Plamuur

What are the hazard statements for MOTIP POLYESTER PLAMUUR?

This substance has 5 hazard statements:

  • H226: Ontvlambare vloeistof en damp.
  • H315: Veroorzaakt huidirritatie.
  • H319: Veroorzaakt ernstige oogirritatie.
  • H361d: Wordt ervan verdacht het ongeboren kind te schaden.
  • H372: Veroorzaakt schade aan de gehoororganen bij langdurige of herhaalde blootstelling.

What is the melting point of MOTIP POLYESTER PLAMUUR?

The melting point is Niet bepaald. and the boiling point is 145 °C.