NextSDS Logo
Safety Data Sheet NL

CUTTING & DRILLING OIL

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
CUTTING & DRILLING OIL
Product Code
1003

Regulatory Identifiers

CAS Number
N/A

Identified Uses

PC24: Smeermiddelen, vetten, lossingsmiddelen.

Manufacturers & Suppliers

P

ProPart International B.V.

manufacturer

Molenakker 3, 5953 TW, Reuver, The Netherlands

+31 (0) 77 476 2368

Emergency Contacts

NVIC

+31 (0) 30 274 8888

Dag en nacht bereikbaar

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
H229

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H222 Zeer licht ontvlambare aerosol.
H229 Houder onder druk: kan openbarsten bij verhitting.

Precautionary Statements

P101 Bij het inwinnen van medisch advies, de verpakking of het etiket ter beschikking houden.
P102 Buiten het bereik van kinderen houden.
P103 Alvorens te gebruiken, het etiket lezen.
P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P211 Niet in een open vuur of op andere ontstekingsbronnen spuiten.
P251 Ook na gebruik niet doorboren of verbranden.
P260 stof/rook/gas/nevel/damp/spuitnevel niet inademen.
P501 Inhoud/Verpakking afvoeren naar een erkend afvalverwerkingsbedrijf volgens de plaatselijke voorschriften.
Tegen zonlicht beschermen. Niet blootstellen aan temperaturen boven 50 °C.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
PROPAAN EC: 200-827-9 74-98-6 16.25% Yes
BUTAAN EC: 203-448-7 106-97-8 7.5% Yes
ISOBUTANE EC: 200-857-2 75-28-5 7.5% Yes
NAFTA (AARDOLIE), MET WATERSTOF BEHANDELD ZWAAR EC: 265-150-3 64742-48-9 16.25% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Verwijder de patiënt van de blootstelling, zonder uw eigen veiligheid in gevaar te brengen. In de frisse lucht brengen na accidenteel inademen van dampen. Raadpleeg een arts.

Symptoms: De patiënt kan over irritatie van de keel en een bedrukt gevoel in de borst klagen.

Skin contact

Verwijder alle vervuilde kleding en schoeisel onmiddellijk tenzij zij aan de huid vastgeplakt zitten.

Symptoms: Op de plek waar het contact plaats vond kunnen zich irritatie en roodheid voordoen.

Eye contact

Het oog gedurende 15 minuten met stromend water bespoelen. Bij aanhoudende irritatie een arts raadplegen.

Symptoms: Er kunnen zich irritatie en roodheid voordoen.

Ingestion

Drink zeer veel water en voer verse lucht aan. Onmiddellijk een dokter waarschuwen.

Symptoms: De patiënt kan over irritatie van de keel klagen.

Immediate Medical Attention

Onmiddellijk een dokter waarschuwen. Raadpleeg een arts.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Koolstofdioxide. Droog chemisch poeder. Waterspray. Tegen alcohol bestand schuim.

Unsuitable media

Gebruik geen waterstraal.

Specific hazards

Bij verbranding worden giftige dampen afgegeven.

Firefighter Protection

Onafhankelijke ademhalingsapparatuur dragen. Beschermende kleding dragen om aanraking met huid en ogen te vermijden.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Onmiddellijk de politie en de brandweer waarschuwen.

Environmental

Produkt niet in riolering of oppervlaktewater lozen.

Cleanup methods

Naar een afgesloten geëtiketteerde container overpompen en op een gepaste manier afvoeren.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Zorg dat er voldoende ventilatie in het gebied is. Produkt niet in een afgesloten ruimte hanteren. Het vormen of verspreiden van nevels in de lucht vermijden. Direct contact met de substantie vermijden. Roken is verboden.

Storage

Op een koele goed geventileerde plaats opslaan. Niet aan ontstekingsbronnen blootstellen. De houder goed gesloten houden. Niet aan direct zonlicht blootstellen. Het opbouwen van een elektrostatische lading in de nabije omgeving dient voorkomen te worden. De vloer van de opslagruimte moet vloeistofdicht zijn om te voorkomen dat de vloeistoffen wegstromen.

Hygiene

Direct contact met de substantie vermijden. Roken is verboden.

Fire prevention

Roken is verboden.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Zorg dat er voldoende ventilatie in het gebied is. Zorg dat verlichting en elektrische apparatuur geen ontstekingsbronnen zijn. De vloer van de opslagruimte moet vloeistofdicht zijn om te voorkomen dat de vloeistoffen wegstromen.

Hands

Niet van toepassing.

Eyes

Niet van toepassing.

Respiratory

Geen ademhalingsbeschermingsmiddelen vereist.

Skin/Body

Niet van toepassing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Lower Explosive Limit
lager: 0,6
Vapor Pressure
3500 hPa
Auto Ignition Temperature
No autoignition
Appearance
---
Colour Intensity
---
Relative Evaporation Rate
---
Partition Coefficient
Geen gegevens beschikbaar.
Kinematic Viscosity
Geen gegevens beschikbaar.
Solubility
---
Ph
Geen gegevens beschikbaar.
Softening Point
---
Evaporation Rate
Niet van toepassing.
Voc Content
367,5 g/l
Metal Corrosion
---
Dynamic Viscosity
---
Molecular Weight
---
Density
0,735 g/cm3 (20
Odor Threshold
---
Properties Status
---
Bulk Density
---
Relative Density
Geen gegevens beschikbaar.
Cloud Point
---
Flash Point
<0 °C
Explosive Limits
---
Odor
Karakteristieke geur
Form
---
Decomposition Temperature
---
Boiling Point
Niet van toepassing.
Solubility In Fat
---
Solubility In Water
Niet resp. gering mengbaar.
Upper Explosive Limit
bovenste: 10,9
State Under Standard Conditions
---
Vapor Density
---
Solidification Point
---
Flammability
---
Physical State Data
aerosol
Freezing Point
---
Melting Point
Geen gegevens beschikbaar.
Colour
Volgens de productspecificatie.
Physical State
Aërosol
Crystallisation Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stabiel onder normale omstandigheden. Stabiel bij kamertemperatuur.

Reactivity

Stabiel bij aanbevolen transport of opslagomstandigheden.

Hazardous reactions

Gevaarlijke reacties vinden niet plaats onder normale transport- of opslagomstandigheden. Ontbinding kan voorkomen bij blootstelling aan omstandigheden of hieronder vermelde materialen.

Avoid

Hitte

Incompatible

Sterke oxideermiddelen. Sterke zuren.

Decomposition

Bij verbranding worden giftige dampen afgegeven.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

In een geschikte houder doen en laat afval door een gespecialiseerd afvalverwerkingsbedrijf verwijderen.

Waste Codes

20 01 13 EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1950
Shipping Name
SPUITBUSSEN (AEROSOLEN)
Transport Class
2
ADR

Warning: Gases

IMDG

Warning: Gases

IATA

Warning: Gases

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for CUTTING & DRILLING OIL?

The signal word is danger.

What is the physical form of CUTTING & DRILLING OIL?

CUTTING & DRILLING OIL is a aërosol with volgens de productspecificatie. color. It has karakteristieke geur odor.

What is CUTTING & DRILLING OIL used for?

PC24: Smeermiddelen, vetten, lossingsmiddelen.

What are the hazard statements for CUTTING & DRILLING OIL?

This substance has 2 hazard statements:

  • H222: Zeer licht ontvlambare aerosol.
  • H229: Houder onder druk: kan openbarsten bij verhitting.

What is the melting point of CUTTING & DRILLING OIL?

The melting point is Geen gegevens beschikbaar. and the boiling point is Niet van toepassing..