Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- IMPRAFIX HS-C
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Harder voor coatingsmaterialen of kleefstoffen voor industriële of beroepsmatige toepassingen
Uses advised against
Niet geschikt voor gebruik bij doe-het-zelftoepassingen.
Manufacturers & Suppliers
Bayer MaterialScience AG
manufacturer
BMS-IO-S&T-PSRA-PSI Product Safety, 51368 Leverkusen
+49 214 30 25026
Emergency Contacts
Bayer Antwerpen NV
+32 3 5403321
Bayer Antwerpen NV
+32 3 5403070
Bayer SAS., Puteaux Cedex, France
+33 (0) 1.49.06.50.00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2,2'-dimethyl-4,4'methyleenbis(cyclohexylamine) EC: 229-962-1 | 6864-37-5 | 90 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Persoon in de frisse lucht brengen, warm houden, laten uitrusten, bij ademhalingsmoeilijkheden is doktershulp vereist.
Na aanraking met de huid onmiddellijk wassen met veel zeep en water. Bij reacties van de huid, arts raadplegen.
Symptoms: Bij reacties van de huid
De geopende ogen voldoende lang (minstens 10 minuten) met indien mogelijk lauw water spoelen. Oogarts raadplegen.
NIET laten braken, hulp van een arts vereist.
Immediate Medical Attention
Bij ademhalingsmoeilijkheden is doktershulp vereist. Bij reacties van de huid, arts raadplegen. Oogarts raadplegen. Bij inslikken is hulp van een arts vereist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
koolstofdioxide (CO2), Schuim, bluspoeder, bij grotere branden ook watersproeistraal.
Sterke waterstraal
Bij brand ontstaan koolstofmonoxide, koolstofdioxide, stikstofoxide, isocyanaatdampen en sporen van cyaanwaterstof (blauwzuur). Bij brand en/of explosie inademen van rook vermijden.
Bij brand en/of explosie inademen van rook vermijden.
Firefighter Protection
Bij brandbestrijding bescherming van de luchtwegen met onafhankelijke luchttoevoer en gesloten veiligheidskleding vereist.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Niet betrokken personen op afstand houden.
Niet in het oppervlaktewater, afvalwater of bodem laten doordringen.
Met chemicaliënbindmiddel, eventueel droog zand opnemen en in gesloten containers opslaan.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Zorg voor voldoende luchtverversing en/of afzuiging op de werkplaats. Bij spuitverwerking is luchtafzuiging vereist. De in hoofdstuk 8 beschreven persoonlijke veiligheidsmaatregelen moeten in acht worden genomen. Contact met de huid en de ogen evenals inademen van dampen vermijden.
Verpakking droog en goed gesloten op een koele, goed geventileerde plaats bewaren.
Van voedings- en genotmiddelen gescheiden houden. Voor de pauzes en na beëindiging van het werk handen wassen en huidbeschermende zalf gebruiken. Werkkleding apart houden. Verontreinigde kleding onmiddellijk uittrekken.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geschikt materiaal voor veiligheidshandschoenen; EN 374: Nitrilrubber >=0,35mm; Doorbraaktijd >=480min. Butylrubber - IIR: dikte >=0,5mm; Doorbraaktijd >=480min. Fluorrubber - FKM: dikte >=0,4mm; Doorbraaktijd >=480min. Polychloropreen - CR: dikte >=0,5mm; Doorbraaktijd >=480min. Advies: gecontamineerde handschoenen verwijderen.
Een bescherming voor de ogen/voor het gezicht dragen.
Bij niet voldoende ventilatie op de werkplek en bij spuitgietverwerking neus- en mondbescherming vereist. Aanbevolen wordt frisse-lucht-masker of voor kortdurende werkzaamheden combinatiefilter A2-P2. Verdere aanbevelingen met betrekking tot bescherming van de ademhalingswegen zijn te vinden in de afzonderlijke blootstellingsscenario's in de bijlage.
Draag geschikte beschermende kleding.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
exotherme reactie met zuren in acht nemen.
zuren
Geen gevaarlijke ontbindingsproducten bij vakkundige opslag en behandeling.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2922
- Shipping Name
- BIJTENDE VLOEISTOF, GIFTIG, N.E.G. (2,2'-Dimethyl-4,4'Methyleenbis(Cyclohexylamine))
- Transport Class
- 8
- Packing Group
- II
Sterk bijtend Giftig. Milieugevaarlijk. Sterk ruikend. Gescheiden van voedings- en genotmiddelen houden.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for IMPRAFIX HS-C?
The signal word is danger.
What is the physical form of IMPRAFIX HS-C?
IMPRAFIX HS-C is a vloeibaar appearing as kleurloos tot geel with kleurloos tot geel color. It has amine-achtig odor.
What is IMPRAFIX HS-C used for?
Harder voor coatingsmaterialen of kleefstoffen voor industriële of beroepsmatige toepassingen
What are the hazard statements for IMPRAFIX HS-C?
This substance has 5 hazard statements:
- H302: Schadelijk bij inslikken.
- H311: Giftig bij contact met de huid.
- H314: Veroorzaakt ernstige brandwonden en oogletsel.
- H330: Dodelijk bij inademing.
- H411: Giftig voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of IMPRAFIX HS-C?
The melting point is <= -1 °C and the boiling point is circa 347 °C bij 1.013 hPa.