Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ammoniumijzer(III) sulfaat dodecahydraat
- Product Code
- X885
Regulatory Identifiers
- CAS Number
- 7783-83-7 Check regulations →
- EC Number
- 233-382-4 Check regulations →
- REACH No.
- De registratie van de geïdentificeerde gebruiksvormen is niet noodzakelijk, omdat de stof conform de REACH-verordning niet registratieplichtig is (< 1 t/a)
Identified Uses
laboratoriumchemicaliën, analytische en laboratoriumtoepassingen
Manufacturers & Suppliers
Carl Roth GmbH + Co KG
manufacturer
Schoemperlenstr. 3-5, D-76185 Karlsruhe, Duitsland
+49 (0) 721 - 56 06 0
http://www.carlroth.de
Emergency Contacts
Centre Antipoisons c/o Hôpital Militaire Reine Astrid
070 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ammoniumijzer(III) sulfaat dodecahydraat EC: 233-382-4 | 7783-83-7 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Voor verse lucht zorgen. Bij twijfel of bij aanhoudende symptomen een arts raadplegen.
Symptoms: Hoesten, pijn, verstikking en ademhalingsmoeilijkheden
Huid met water afspoelen/afdouchen. Bij twijfel of bij aanhoudende symptomen een arts raadplegen.
Symptoms: Lokale roodheid
Voorzichtig afspoelen met water gedurende een aantal minuten. Bij twijfel of bij aanhoudende symptomen een arts raadplegen.
Symptoms: Veroorzaakt lichte tot matige irritatie
Meteen mond uitspoelen en veel water drinken. Bij onwel voelen een arts raadplegen.
Symptoms: Malaise, Braken, Diarree
Immediate Medical Attention
Bij twijfel of bij aanhoudende symptomen een arts raadplegen.
Medical Treatment
Symptomatische behandeling.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
sproeiwater, schuim, droog bluspoeder, kooldioxide (CO2)
volle waterstraal
Niet brandbaar.
Met normale voorzorgen vanaf een redelijke afstand blussen.
Firefighter Protection
Draag onafhankelijke ademhalingsapparatuur.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Tegengaan van stofvorming. Stof niet inademen.
Vermijden dat het product in afvoerkanalen, oppervlaktewater of grondwater terechtkomt.
Mechanisch opnemen. Tegengaan van stofvorming.
Related Products
Similar products with comparable safety profiles
Ammoniumijzer(III)sulfaat dodecahydraat
CAS: 7783-83-7
Ammoniumijzer(III)sulfaat.12aq z.z.
CAS: 7783-83-7
ammoniumijzer(II)sulfaat-hexahydraat extra zuiver
CAS: 10045-89-3
AmmoniumijzeR-(II)-sulfaat hexahydraat
CAS: 7783-85-9
Ijzer-(II)-sulfaat heptahydraat
CAS: 7782-63-0
Ijzer (II) sulfaat heptahydraat
CAS: 7782-63-0
Ammoniumijzer(III)sulfaat-dodecahydraat voor analyse EMSURE® ACS, ISO, Reag. Ph Eur
CAS: 7783-83-7
Ammoniumsulfaat
CAS: 7783-20-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Stofontwikkeling vermijden.
Op een droge plaats bewaren. In goed gesloten verpakking bewaren.
Verwijderd houden van eet- en drinkwaren en van diervoeder.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Draag geschikte handschoenen. Geschikt zijn volgens EN 374 beproefde handschoenen tegen chemicaliën. Soort materiaal: NBR (Nitrilrubber). Materiaaldikte: >0,11 mm. Doorbraaktijd van het handschoenmateriaal: >480 minuten (permeatieniveau: 6).
Veiligheidsbril met zijbescherming dragen.
Adembescherming is noodzakelijk bij: Stofontwikkeling. Deeltjesfilter (EN 143). P1 (filter minstens 80% van de luchtpartikels, kleurcode: wit).
Vermijden dat het product in afvoerkanalen, oppervlaktewater of grondwater terechtkomt.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het materiaal is stabiel onder normale atmosferische omstandigheden en verwachte temperatuur en druk bij opslag en hantering.
Deze stof is niet reactief onder normale omgevingsomstandigheden.
Exotherme reactie met: Sterk oxiderend
Directe lichtinstraling.
Er is geen verdere informatie. Vrijkomen van giftige materialen met zuren
Gevaarlijke verbrandingsproducten: zie rubriek 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ammoniumijzer(III) sulfaat dodecahydraat?
The signal word is no signal word.
What is the physical form of Ammoniumijzer(III) sulfaat dodecahydraat?
Ammoniumijzer(III) sulfaat dodecahydraat is a vast (poeder, amorf) appearing as vast (poeder, amorf) with licht violet color. It has geurloos odor.
What is Ammoniumijzer(III) sulfaat dodecahydraat used for?
laboratoriumchemicaliën, analytische en laboratoriumtoepassingen
What is the melting point of Ammoniumijzer(III) sulfaat dodecahydraat?
The melting point is 39 – 41 °C .