Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ijzer-(II)-sulfaat heptahydraat
- Product Code
- 215422
- Chemical Name
- Ijzer-(II)-sulfaat heptahydraat
Regulatory Identifiers
- CAS Number
- 7782-63-0 Check regulations →
- REACH No.
- 01-2119513203-57-XXXX
Identified Uses
Laboratoriumchemikaliën, Vervaardiging van stoffen
Manufacturers & Suppliers
SIGALD
distributor
Merck Life Science BV/SRL
distributor
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ferrous sulfate heptahydrate EC: 231-753-5 | 7782-63-0 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inhalatie: frisse lucht.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen.
Na oog contact: uitspoelen met ruim voldoende water. Oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Gebruik blusmiddelen die geschikt zijn voor de plaatselijke omstandigheden en de omgeving.
Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.
Aard van ontledingsproducten niet bekend. Niet brandbaar. Door brand in de omgeving is het ontstaan van gevaarlijke dampen mogelijk.
Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.
Firefighter Protection
Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.
Product niet in de riolering laten komen.
Droog opnemen.
Related Products
Similar products with comparable safety profiles
Ijzer (II) sulfaat heptahydraat
CAS: 7782-63-0
ijzer(II)sulfaat(1:1)heptahydraat
CAS: 7782-63-0
ijzersulfaat-heptahydraat
CAS: 7782-63-0
Ammoniumijzer(III)sulfaat dodecahydraat
CAS: 7783-83-7
Ammoniumijzer(III) sulfaat dodecahydraat
CAS: 7783-83-7
IJzer (II) sulfaat heptahydraat ≥99,5%, Ph.Eur., USP
CAS: 7782-63-0
Koper(II)-sulfaat pentahydraat
CAS: 7758-99-8
Koper(II)-sulfaat pentahydraat
CAS: 7758-99-8
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Zie hoofdstuk 2.2
Goed afgesloten. Droog. Luchtgevoelig. Bewaren onder inert gas. hygroscopisch
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Volledig contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Spat contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN374 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU). beschermbril
Aanbevolen filtertype: Filter B-(P2). De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
beschermende kleding
Product niet in de riolering laten komen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (ka mertemperatuur).
Geen gegevens beschikbaar
verhoogde reactiviteit met: Basen, Oxidanten
geen informatie beschikbaar
Sterke oxidatiemiddelen
In geval van brand: zie hoofdstuk 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ijzer-(II)-sulfaat heptahydraat?
The signal word is warning.
What is the physical form of Ijzer-(II)-sulfaat heptahydraat?
Ijzer-(II)-sulfaat heptahydraat is a vast . It has geen gegevens beschikbaar odor.
What is Ijzer-(II)-sulfaat heptahydraat used for?
Laboratoriumchemikaliën, Vervaardiging van stoffen
What are the hazard statements for Ijzer-(II)-sulfaat heptahydraat?
This substance has 3 hazard statements:
- H302: Schadelijk bij inslikken.
- H315: Veroorzaakt huidirritatie.
- H319: Veroorzaakt ernstige oogirritatie.
What is the melting point of Ijzer-(II)-sulfaat heptahydraat?
The melting point is 64 °C .