Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sulfolaan synthese kwaliteit
- Product Code
- 8.07993
- Chemical Name
- Sulfolaan
Regulatory Identifiers
- CAS Number
- 126-33-0 Check regulations →
- REACH No.
- 01-2119565139-32-XXXX
Identified Uses
Synthese chemicalie
Manufacturers & Suppliers
Millipore
distributor
Merck Life Science BV/SRL
distributor
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sulpholane EC: 204-783-1 | 126-33-0 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inademen: frisse lucht. Arts waarschuwen.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Een arts raadplegen.
Na oog contact: uitspoelen met ruim voldoende water. Oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Schuim, Kooldioxide (CO2), Droogpoeder
Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.
Koolstofoxiden, Zwaveloxiden, Brandbaar. Dampen zijn zwaarder dan lucht en verspreiden zich mogelijk over de vloer. Vormt ontplofbare mengsels met lucht bij sterke verhitting. In geval van brand kunnen er gevaarlijke brandgassen en dampen ontstaan.
Gassen/dampen/nevels neerslaan met behulp van een watersproeistraal.
Firefighter Protection
Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Dampen, aerosol niet inademen. Inhalatie van dampen/aerosolen of stof vermijden. Vermijd contact met de stof. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.
Voorzichtig opnemen met vloeistofabsorberend materiaal (b.v. Chemizorb®).
Materials: vloeistofabsorberend materiaal (b.v. Chemizorb®)
Related Products
Similar products with comparable safety profiles
Furfural synthese kwaliteit
CAS: 98-01-1
Salicylzuur synthese kwaliteit
CAS: 69-72-7
Trifluorazijn zuur synthese kwaliteit
CAS: 76-05-1
Trifluorazijn zuur synthese kwaliteit
CAS: 76-05-1
Propylacetaat synthese kwaliteit
CAS: 109-60-4
Thiofenol synthese kwaliteit
CAS: 108-98-5
Laurinezuur synthese kwaliteit
CAS: 143-07-7
Laurinezuur synthese kwaliteit
CAS: 143-07-7
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Stof/mengsel niet inademen. Ontwikkeling van dampen/aerosolen vermijden.
Goed afgesloten. Op een goed geventileerde plaats bewaren. Achter slot bewaren of in een ruimte die alleen toegankelijk is voor vakbekwame of geautoriseerde personen. Aanbevolen bewaartemperatuur, zie productlabel.
Verontreinigde kleding meteen vervangen. Gebruik huidbeschermende crème. Na het werken met de stof handen en gezicht wassen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Volledig contact: Materiaal: Chloropreen, Minimale laagdikte: 0,65 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 720 Camapren®. Spat contact: Materiaal: Latex handschoenen, Minimale laagdikte: 0,6 mm, Doorbraaktijd: 30 min, Getest materiaal: Lapren® (KCL 706 / Aldrich Z677558, Maat M). Voldoet aan EN374.
Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU). beschermbril
Aanbevolen filtertype: Filter A-(P2). De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
beschermende kleding
Product niet in de riolering laten komen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (kamertemperatuur).
Vormt ontplofbare mengsels met lucht bij sterke verhitting. Het kritische bereik is vanaf ca. 15 Kelvin lager dan het vlampunt.
Heftige reacties mogelijk met: Sterke oxidatiemiddelen
Sterke verhitting.
Sterke oxidatiemiddelen
In geval van brand: zie hoofdstuk 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3334
- Shipping Name
- Aviation regulated liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sulfolaan synthese kwaliteit?
The signal word is danger.
What is the physical form of Sulfolaan synthese kwaliteit?
Sulfolaan synthese kwaliteit is a vaste massa, vervloeiend appearing as vaste massa, vervloeiend with wit color. It has geen gegevens beschikbaar odor.
What is Sulfolaan synthese kwaliteit used for?
Synthese chemicalie
What are the hazard statements for Sulfolaan synthese kwaliteit?
This substance has 2 hazard statements:
- H302: Schadelijk bij inslikken.
- H360FD: Kan de vruchtbaarheid schaden. Kan het ongeboren kind schaden.
What is the melting point of Sulfolaan synthese kwaliteit?
The melting point is 27 °C and the boiling point is 285 °C bij 1.013 hPa.