NextSDS Logo
Safety Data Sheet NL

Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat
Product Form
Aerosol
Product Code
MBA23/872+200ml IFI NC TC

Regulatory Identifiers

CAS Number
N/A

Identified Uses

SU3 Industrieel gebruik: Gebruik van stoffen als zodanig of in preparaten in een industriële omgeving, SU22 Professioneel gebruik: Publiek domein (administratie, onderwijs, amusement, dienstverlening, ambachtslieden), verlakking

Uses advised against

Geen verdere relevante informatie verkrijgbaar.

Emergency Contacts

Nationaal Vergiftigingen, Informatie Centrum, Rijksinstituut voor Volksgezondheid en Milieuhygiene, Bilthoven

+31 30 274 88 88

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosol Cat. 1 H229
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H222 Zeer licht ontvlambare aerosol.
H229 Houder onder druk: kan open barsten bij verhitting.
H319 Veroorzaakt ernstige oogirritatie.
H336 Kan slaperigheid of duizeligheid veroorzaken.

Precautionary Statements

P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P211 Niet in een open vuur of op andere ontstekingsbronnen spuiten.
P251 Ook na gebruik niet doorboren of verbranden.
P271 Alleen buiten of in een goed geventileerde ruimte gebruiken.
P305 + P351 + P338 BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen.
P312 Bij onwel voelen een ANTIGIFCENTRUM/arts raadplegen.
P337 + P313 Bij aanhoudende oogirritatie: een arts raadplegen.
P410 + P412 Tegen zonlicht beschermen. Niet blootstellen aan temperaturen boven 50 °C/122 °F.
P501 De inhoud en de verpakking verwerken volgens de plaatselijke/regionale/nationale/internationale voorschriften.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
dimethylether EC: 204-065-8 115-10-6 50 - 100% Yes
aceton EC: 200-662-2 67-64-1 10 - 25% Yes
propaan EC: 200-827-9 74-98-6 5 - 10% Yes
butaan (<0,1% 1,3 butadiene) EC: 203-448-7 106-97-8 2.5 - 5% Yes
isobutaan EC: 200-857-2 75-28-5 1 - 2.5% Yes
ethylacetaat EC: 205-500-4 141-78-6 1 - 2.5% Yes
n-butylacetaat EC: 204-658-1 123-86-4 1 - 2.5% Yes
2-methoxy-1-methylethylacetaat EC: 203-603-9 108-65-6 1 - 2.5% Yes
nitrocellulose, droog of bevochtigd met minder dan 25% water (of alcohol), naar massa 9004-70-0 1 - 2.5% Yes
Calciumcarbonaat EC: 215-279-6 1317-65-3 1 - 2.5% No
ethanol EC: 200-578-6 64-17-5 1% Yes
xyleen, mengsel van isomeren EC: 215-535-7 1330-20-7 1% Yes
butylglycolaat EC: 230-991-7 7397-62-8 1% Yes
butaan-1-ol EC: 200-751-6 71-36-3 1% Yes
ethylbenzeen EC: 202-849-4 100-41-4 1% Yes
maleinezuuranhydride EC: 203-571-6 108-31-6 0.001% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Frisse lucht toedienen; bij klachten arts ontbieden.

Skin contact

Over het algemeen is het product niet prikkelend voor de huid

Eye contact

De ogen gedurende verscheidene minuten onder stromend water afspoelen terwijl de oogspleet geopend blijft. Bij aanhoudende klachten een dokter raadplegen.

Ingestion

Als de klachten niet minderen, een arts raadplegen

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Specific hazards

Geen verdere relevante informatie verkrijgbaar.

Firefighter Protection

Geen bijzondere maatregelen nodig.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Beschermende kleding aantrekken. Niet beschermd personen op afstand houden.

Environmental

Niet in de riolering/het oppervlaktewater/het grondwater laten terechtkomen.

Cleanup methods

Besmet materiaal zoals afval volgens punt 13 verwijderen.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Tegen hitte en directe zonnestralen beschermen. Niet spuiten in de richting van een vlam of een gloeiend voorwerp. Ontstekingsbronnen op afstand houden - niet roken. Houder onder druk. Beschermen tegen de zon en niet blootstellen aan een hogere temperatuur dan 50°C, bijv. door gloeilampen. Ook na gebruik niet doorboren of verbranden.

Storage

De overheidsbepalingen m.b.t. de opslag van drukgaspakkingen moeten in acht genomen worden.

Fire prevention

Ontstekingsbronnen op afstand houden - niet roken.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Geen aanvullende gegevens. Zie 7.

Hands

Veiligheidshandschoenen. Het handschoenmateriaal moet ondoorlatend en bestand zijn tegen het product / de stof / de bereiding. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. Handschoenen moeten na elke combinatie worden gewisseld. De precieze penetratietijd kunt u te weten komen bij de handschoenfabrikant; houd er rekening mee. Voor een langdurig contact van maximaal 15 minuten zijn handschoenen uit de volgende materialen geschikt: butylrubber, 0,7mm

Eyes

Veiligheidsbril. Nauw aansluitende veiligheidsbril

Respiratory

Ligt de oplosmiddelconcentratie boven de MAC-grenswaarden moet een adembeveilingstoestel worden gedragen dat voor dit doel is toegelaten. Halfmasker met combinatiefilter tenminste filterklasse A1P2 of kunstmatig geventileerd adembeveilingstoestel.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
aërosol
Appearance
Volgens de productbeschrijving
Solubility
---
Colour Intensity
---
Freezing Point
Niet bepaald.
Cloud Point
---
Relative Evaporation Rate
---
Colour
Volgens de productbeschrijving
Bulk Density
---
Lower Explosive Limit
2,6 Vol % (67-64-1 aceton)
Form
aërosol
Crystallisation Point
---
Softening Point
---
State Under Standard Conditions
---
Melting Point
Niet bepaald.
Properties Status
---
Boiling Point
-44 °C
Odor
Karakteristiek
Vapor Density
Niet bepaald.
Flash Point
-97 °C (74-98-6 propaan)
Partition Coefficient
Niet bepaald.
Explosive Limits
---
Vapor Pressure
3.400 hPa (115-10-6 dimethylether)
Ph
Het mengsel is apolair/aprotisch.
Solubility In Water
Niet resp. gering mengbaar.
Molecular Weight
---
Density
---
Odor Threshold
Niet bepaald.
Metal Corrosion
---
Dynamic Viscosity
Niet bepaald.
Solubility In Fat
---
Relative Density
0,712 g/ml
Auto Ignition Temperature
235 °C (115-10-6 dimethylether)
Solidification Point
---
Decomposition Temperature
Niet bepaald.
Evaporation Rate
Niet bruikbaar.
Voc Content
93,07 %
Upper Explosive Limit
18,6 Vol % (115-10-6 dimethylether)
Kinematic Viscosity
Niet bepaald.
Flammability
---
Physical State Data
aerosol
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Geen afbraak bij gebruik volgens voorschrift.

Reactivity

Geen verdere relevante informatie verkrijgbaar.

Hazardous reactions

Geen gevaarlijke reacties bekend.

Avoid

Geen verdere relevante informatie verkrijgbaar.

Incompatible

Geen verdere relevante informatie verkrijgbaar.

Decomposition

Geen gevaarlijke ontbindingsproducten bekend.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1950
Shipping Name
SPUITBUSSEN
Transport Class
2
Packing Group
vervalt
ADR

Waarschuwing: Gassen

IMDG

SW1 Protected from sources of heat. SW22 For AEROSOLS with a maximum capacity of 1 litre: Category A. For AEROSOLS with a capacity above 1 litre: Category B. For WASTE AEROSOLS: Category C, Clear of living quarters. SG69 For AEROSOLS with a maximum capacity of 1 litre: Segregation as for class 9. Stow 'separated from' class 1 except for division 1.4. For AEROSOLS with a capacity above 1 litre: Segregation as for the appropriate subdivision of class 2. For WASTE AEROSOLS: Segregation as for the appropriate subdivision of class 2.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat?

The signal word is danger.

What is the physical form of Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat?

Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat is a aërosol appearing as volgens de productbeschrijving with volgens de productbeschrijving color. It has karakteristiek odor.

What is Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat used for?

SU3 Industrieel gebruik: Gebruik van stoffen als zodanig of in preparaten in een industriële omgeving, SU22 Professioneel gebruik: Publiek domein (administratie, onderwijs, amusement, dienstverlening, ambachtslieden), verlakking

What are the hazard statements for Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat?

This substance has 4 hazard statements:

  • H222: Zeer licht ontvlambare aerosol.
  • H229: Houder onder druk: kan open barsten bij verhitting.
  • H319: Veroorzaakt ernstige oogirritatie.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.

What is the melting point of Aerosol 1K Fill-in befüllt mit 200 ml Imron Fleet Line Industry NC Topcoat?

The melting point is Niet bepaald. and the boiling point is -44 °C.