NextSDS Logo
Safety Data Sheet NL

Tangit All Pressure PVC-Lijm

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Tangit All Pressure PVC-Lijm

Regulatory Identifiers

CAS Number
N/A
UFI Code
F7C5-N0V8-200N-A950

Identified Uses

Lijm voor buizen

Manufacturers & Suppliers

Henkel Belgium N.V. logo

Henkel Belgium N.V.

national supplier

Esplanade 1, 1020 Brussels, Belgie

+32 (2) 421 2711

http://www.mysds.henkel.com

Emergency Contacts

Noodnummer

+32 70 222 076

24 h

Antigifcentrum Belgie

+32 (0) 70 245245

7d/7d- 24u/24u

Luxemburg

++352 8002 5500

7d/7d- 24u/24u

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Skin Irrit. Cat. 2 H315
Eye Dam. Cat. 1 H318
Carc. Cat. 2 H351
STOT SE Cat. 3 H336
STOT SE Cat. 3 H335

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 Licht ontvlambare vloeistof en damp.
H315 Veroorzaakt huidirritatie.
H318 Veroorzaakt ernstig oogletsel.
H335 Kan irritatie van de luchtwegen veroorzaken.
H336 Kan slaperigheid of duizeligheid veroorzaken.
H351 Verdacht van het veroorzaken van kanker.

Precautionary Statements

P102 Buiten het bereik van kinderen houden.
P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P260 Nevel/damp niet inademen.
P271 Alleen buiten of in een goed geventileerde ruimte gebruiken.
P280 Beschermende handschoenen/oogbescherming dragen.
P305 + P351 + P338 BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen.
P310 Onmiddellijk een ANTIGIFCENTRUM/arts raadplegen.
P501 Inhoud/verpakking afvoeren naar overeenkomstig de nationale voorschriften.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
butanon EC: 201-159-0 78-93-3 20 - 40% Yes
Tetrahydrofuraan EC: 203-726-8 109-99-9 25 - 30% Yes
Cyclohexanon EC: 203-631-1 108-94-1 10 - 25% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Frisse lucht, bij aanhoudende klachten arts consulteren.

Symptoms: Irritatie, hoesten, kortademig, benauwde borstkas. Dampen kunnen slaperigheid en duizeligheid veroorzaken.

Skin contact

spoelen onder stromend water met zeep. Verontreinigde kleding onmiddellijk uittrekken.

Symptoms: Roodheid, ontsteking.

Eye contact

Direct onder stromend water spoelen (10 minuten lang), specialist consulteren.

Symptoms: corrosief, kan onomkeerbare oogletsels veroorzaken (verlies van het zicht)

Ingestion

Mondholte spoelen, arts consulteren.

Immediate Medical Attention

Bij klachten arts consulteren. Specialist consulteren bij oogcontact.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

schuim, bluspoeder, koolstofdioxide, watersproeistraal, waternevel

Unsuitable media

Waterstraal (vol)

Specific hazards

In geval van brand kan koolmonoxide (CO) en kooldioxide (CO2) worden vrijgemaakt.

Instructions

De aan gevaar blootgestelde tanks met watersproeistraal koelen.

Firefighter Protection

Persoonlijke veiligheidskleding dragen. Van de omgevingslucht onafhankelijk ademmasker dragen.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Mag niet in de riolering / water / grondwater terecht komen.

Cleanup methods

Met absorberend materiaal opnemen

Materials: zand, zaagsel, turf

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Werkplaats goed ventileren. Open vuur, vonken en ontstekingsbronnen vermijden. Elektrische toestellen afzetten. Niet roken, niet lassen. Resten niet in het afvalwater brengen. Bij het verwerken en het drogen, ook na het kleven, goed ventileren. Ook in bijruimten alle ontstekingsbronnen, bv. open vuurhaarden en ovens vermijden. Elektrische toestellen zoals straalkachels, kookplaten, nachttarief-verwarmers etc. vroegtijdig afzetten zodat ze afgekoeld zijn bij begin van de arbeid. Elke bron van vonken, ook die ontstaan aan elektrische schakelaars en toestellen vermijden. Vermijd contact met de ogen en huidcontact.

Storage

Opslaan in de originele gesloten verpakking. Voorschriften voor brandbare vloeistoffen in acht nemen. Een temperatuur tussen +5 °C und +35 °C. Koel, in de gesloten originele verpakking opslaan. Niet opslaan met voedings- en genotmiddelen.

Hygiene

Niet eten, drinken of roken tijdens het gebruik. Voor de pauzen en stopzetting van de arbeid handen wassen.

Fire prevention

Open vuur, vonken en ontstekingsbronnen vermijden. Elektrische toestellen afzetten. Niet roken, niet lassen. Ook in bijruimten alle ontstekingsbronnen, bv. open vuurhaarden en ovens vermijden. Elektrische toestellen zoals straalkachels, kookplaten, nachttarief-verwarmers etc. vroegtijdig afzetten zodat ze afgekoeld zijn bij begin van de arbeid. Elke bron van vonken, ook die ontstaan aan elektrische schakelaars en toestellen vermijden.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Aanbevolen worden handschoenen gemaakt van nitril rubber (materiaaldikte >0,1 mm, doorbraaktijd < 30s). Handschoenen moeten vervangen worden na elk korte termijn contact of contaminatie. Beschikbaar bij labo gespecialiseerde handel of apotheek/chemie winkels. Bij een langer contact worden handschoenen uit butylrubber volgens EN 374 aanbevolen. materiaaldikte > 0,3 mm doorbraaktijd > 10 min. Bij een langer en herhaald contact moet in het oog gehouden worden dat de bovengenoemde penetratietijd in de praktijk aanmerkelijk korter kan zijn dan in EN 374 beschreven. De beschermingshandschoenen moeten in elk geval tegen het arbeidsspecifiek gebruik bestand zijn (mechanische en thermische duurzaamheid, productaangepast, antistatisch etc). Bij eerste tekenen van sleet dienen ze direct vervangen te worden. De aanwijzingen van de fabrikant en veiligheidsrichtlijnen dienen steds nageleefd te worden. We raden een toepassingsgericht plan voor handbescherming op te stellen in samenwerking met de leverancier van de handschoenen en de beropsfederatie.

Eyes

Volledig sluitende veiligheidsbril. Oogbeschermingsmiddelen moeten conform zijn met EN 166.

Respiratory

Bij onvoldoende ventilatie een geschikt masker dragen. De filter van de combinatie: ABEKP (EN 14387) Deze aanbeveling dient gecheckt te worden met lokale voorwaarden.

Skin/Body

Geschikte veiligheidskleding. Beschermende kledij moet conform zijn met EN 14605 voor vloeibare spatten en met EN 13982 voor stof.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Fat
---
Melting Point
Niet van toepassing, Product is een vloeistof
Solubility
gedeeltelijk oplosbaar
Explosive Limits
---
Auto Ignition Temperature
215 °C (419 °F)
Physical State
vloeistof
Relative Evaporation Rate
---
Vapor Density
---
Cloud Point
---
Form
vloeistof
Softening Point
---
Flammability
ontvlambaar
Decomposition Temperature
Niet van toepassing, De stof of het mengsel is niet zelfontledend, bevat geen organische peroxiden en ontleedt niet onder de voorziene gebruiksomstandigheden
Voc Content
---
Lower Explosive Limit
1,3 %(V)
Odor Threshold
---
Density
0,960 g/cm3
Upper Explosive Limit
12,6 %(V)
State Under Standard Conditions
---
Relative Density
0,960 g/cm3
Ph
Niet van toepassing, Product is niet oplosbaar (in water)
Vapor Pressure
173 mbar (20 °C (68 °F)); 612 mbar (50 °C (122 °F))
Colour Intensity
---
Odor
sterk, naar oplosmiddel
Solubility In Water
---
Colour
Kleurloos
Molecular Weight
---
Flash Point
-4 °C (24.8 °F)
Kinematic Viscosity
7.300 - 15.600 mm2/s
Physical State Data
liquid
Appearance
Kleurloos, Hel, troebel
Boiling Point
66 °C (150.8 °F)
Crystallisation Point
---
Freezing Point
---
Solidification Point
-31 °C (-23.8 °F)
Partition Coefficient
Niet van toepassing
Dynamic Viscosity
7.300 - 15.600 mpa.s
Evaporation Rate
---
Properties Status
---
Metal Corrosion
---
Bulk Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stabiel onder de aanbevolen opslagomstandigheden.

Reactivity

Geen bekend bij gebruik overeenkomstig de bestemming.

Hazardous reactions

Zie hoofdstuk reactiviteit

Avoid

Geen bekend bij gebruik overeenkomstig de bestemming.

Incompatible

Geen bij gebruik overeenkomstig de bestemming

Decomposition

Niet bekend

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Verwijderen van afval en resten volgens locale wetgeving.

Waste Codes

080409 EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1133
Shipping Name
LIJMEN
Transport Class
3
Packing Group
II
ADR

Bijzondere bepaling 640D

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Tangit All Pressure PVC-Lijm?

The signal word is danger.

What is the physical form of Tangit All Pressure PVC-Lijm?

Tangit All Pressure PVC-Lijm is a vloeistof appearing as kleurloos, hel, troebel with kleurloos color. It has sterk, naar oplosmiddel odor.

What is the solubility of Tangit All Pressure PVC-Lijm?

gedeeltelijk oplosbaar

What is Tangit All Pressure PVC-Lijm used for?

Lijm voor buizen

What are the hazard statements for Tangit All Pressure PVC-Lijm?

This substance has 6 hazard statements:

  • H225: Licht ontvlambare vloeistof en damp.
  • H315: Veroorzaakt huidirritatie.
  • H318: Veroorzaakt ernstig oogletsel.
  • H335: Kan irritatie van de luchtwegen veroorzaken.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.
  • H351: Verdacht van het veroorzaken van kanker.

What is the melting point of Tangit All Pressure PVC-Lijm?

The melting point is Niet van toepassing, Product is een vloeistof and the boiling point is 66 °C (150.8 °F).