Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SYLOID® ED 30
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU1, SU3, SU5, SU6b, SU7, SU8, SU10, SU11, SU12, SU15, SU16, SU19; PC1, PC2, PC8, PC9a, PC9b, PC12, PC14, PC15, PC18, PC19, PC20, PC23, PC26, PC27, PC28, PC31, PC32, PC33, PC34, PC35, PC37, PC40, PC0; PROC1, PROC2, PROC3, PROC5, PROC8a
Manufacturers & Suppliers
GRACE GmbH
manufacturer
In der Hollerhecke 1, D-67547 Worms, GERMANY
+49 (0)6241 - 403 1549
Emergency Contacts
Emergency Contact
+49 (0)172 7129276
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Toebereiding uit synthetisch, amorf siliciumdioxide en organische substanties.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| siliciumdioxide, chemisch bereid EC: 231-545-4 | 7631-86-9 | 90 - 95% | No |
| paraffinewassen en koolwaterstofwassen EC: 232-315-6 | 8002-74-2 | 2.5 - 7.5% | No |
| Hydrocarbon waxes (petroleum), hydrotreated microcryst. EC: 265-163-4 | 64742-60-5 | 2.5% | No |
Handelsnaam: SYLOID® ED 30
First Aid Measures
Emergency procedures for chemical exposure incidents
Voor verse lucht zorgen. Bij klachten medische behandeling inschakelen.
Onmiddellijk met water afwassen. Wanneer de huid geïrriteerd blijft, een dokter raadplegen.
De ogen gedurende verscheidene minuten onder stromend water afspoelen terwijl de oogspleet geopend blijft. Bij aanhoudende klachten een dokter raadplegen.
Als de klachten niet minderen, een arts raadplegen
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Brandblusmaatregelen op omgeving afstemmen. CO2, bluspoeder of waterstraal. Grotere brand met waterstraal bestrijden of met schuim, dat tegen alcohol bestand is.
Krachtige waterstraal
Bij een brand kan vrijkomen: Koolmonoxyde en kooldioxyde
Stofvorming vermijden.
Firefighter Protection
Persoonlijke beschermingskleding dragen.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Turbulentie van lucht, welke stofdeeltjes van het product bevat, resulteert in een explosieve atmosfeer.
Stof met watersproeistraal neerslaan. Niet in de riolering/het oppervlaktewater/het grondwater laten terechtkomen.
Borstel de bevuilde oppervlakte
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Stofvorming vermijden. Tanks ondoordringbaar gesloten houden. Onststekingsbronnen op afstand houden - niet roken.
Tanks ondoordringbaar gesloten houden.
Vermijd vonken veroorzaakt door statische elektriciteit. Onststekingsbronnen op afstand houden - niet roken.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Veiligheidshandschoenen. Draag handschoenen ter bescherming tegen mechanische risico's volgens EN 388. Gebruik handschoenen uit stabiel materiaal (b.v. nitriel) - desgevallend met gebreide drager ter verbetering van het draagcomfort. Controleer voor elk gebruik of de beschermende handschoenen aan de voorschriften voldoen. Voor elke nieuwe toepassing van de handschoen moet de dichtheid ervan gecontroleerd worden. Preventieve bescherming van de huid door gebruik van een huidbeschermingsmiddel wordt aanbevolen. Na gebruik van handschoenen, een middel gebruiken voor het reinigen en verzorgen van de huid. Handschoenmateriaal: Butylrubber, Nitrilrubber. Aanbevolen materiaaldikte :≥0,11 mm. EN 388: Minimumeis vermogensniveau 1 voor alle groepen. Doordringingstijd van het handschoenmateriaal EN 420: Minimumeis vermogensniveau 1 voor alle groepen. Voor het mengsel van de hieronder vermelde chemicaliën moet de penetratietijd minstens 480 minuten bedragen (permeatie volgens EN 16523-1:2015: Level 6). Voor een langdurig contact in toepassingen zonder verhoogd verwondingsgevaar (b.v. laboratorium) zijn handschoenen uit volgend materiaal geschikt: Butylrubber Nitrilrubber. Voor een langdurig contact zijn handschoenen uit de volgende materialen geschikt: Butylrubber Nitrilrubber. Niet geschikt zijn handschoenen uit de volgende materialen: Handschoenen uit dikke stof.
Veiligheidsbril
Wanneer de Occupational Exposure Limit (professionele blootstellingslimiet) overschreden wordt. Filter P2
Draag geschikte beschermende arbeidskleding
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Geen afbraak bij opslag en handling volgens voorschrift.
Geen verdere relevante informatie verkrijgbaar.
Turbulentie van lucht, welke stofdeeltjes van het product bevat, resulteert in een explosieve atmosfeer.
Geen verdere relevante informatie verkrijgbaar.
Ingeval van thermische ontbinding, veroorzaakt door smeulen of onvolledige verbranding kunnen toxische dampen vrijkomen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SYLOID® ED 30?
The signal word is no signal word.
What is the physical form of SYLOID® ED 30?
SYLOID® ED 30 is a vast appearing as vast poeder with wit color. It has reukloos odor.
What is SYLOID® ED 30 used for?
SU1, SU3, SU5, SU6b, SU7, SU8, SU10, SU11, SU12, SU15, SU16, SU19; PC1, PC2, PC8, PC9a, PC9b, PC12, PC14, PC15, PC18, PC19, PC20, PC23, PC26, PC27, PC28, PC31, PC32, PC33, PC34, PC35, PC37, PC40, PC0; PROC1, PROC2, PROC3, PROC5, PROC8a
What is the melting point of SYLOID® ED 30?
The melting point is 80-130 °C (wax) and the boiling point is Niet bepaald..