Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EBECRYL® 168 radiation curing resins
- Chemical Name
- GEMETHACRYLEERDE ZUURVERBINDING
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2120140608-57-0000
Identified Uses
Coatings & inkten
Manufacturers & Suppliers
Allnex Belgium SA/NV
manufacturer
Anderlechtstraat, 33, 1620 Drogenbos, BE
+32 2-3345111
http://www.allnex.com/contact
Allnex Netherlands BV
Emergency Contacts
Carechem 24
+44 (0) 1235 239 670
24 uur per dag
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-propeenzuur, 2-methyl-, 2-hydroxyethylester, reactie producten met fosforoxide (met 5-10 % orthofosforzuur CAS 7664-38-2) EC: 810-703-1 | 1187441-10-6 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
In de frisse buitenlucht brengen. Bij moeizame ademhaling zuurstof toedienen. Een arts raadplegen bij aanhoudende symptomen.
Spoelen met een doorlopende stroom lauwwarm water, gedurende 20 minuten of totdat het materiaal is verwijderd. Wassen met veel water en zeep. Verontreinigde kleding en schoenen onmiddellijk verwijderen. Medische hulp inschakelen als symptomen aanhouden.
Bij contact met de ogen, deze onmiddellijk gedurende ten minste 15 minuten spoelen onder stromend water. De oogleden open houden om ervoor te zorgen dat het volledige oogoppervlak en de oogleden met water worden gespoeld. Als er geen arts beschikbaar is, 15 minuten langer spoelen. Onmiddellijk medische hulp inroepen.
Bij inname onmiddellijk een arts raadplegen. Alleen laten braken op instructie van een arts. Nooit een bewusteloos persoon laten drinken (of eten).
Immediate Medical Attention
Onmiddellijk medische hulp inroepen bij contact met de ogen. Bij inname onmiddellijk een arts raadplegen. Een arts raadplegen bij aanhoudende symptomen na inademing of huidcontact.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Gebruik water, kooldioxide of poeder.
Bij blootstelling aan vuur containers koel houden door te bespuiten met water.
Firefighter Protection
Brandweerlieden en anderen die worden blootgesteld dienen een perslucht toestel te dragen. Volledige brandbeschermende kleding dragen. Zie sektie 8 (Maatregelen ter beheersing van blootstelling/ persoonlijke bescherming).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Geen bekend.
Gemorst materiaal laten absorberen aan inert materiaal en opscheppen. Spoel de omgeving waar gemorst is met water. Indien gladheid voortduurt, meer absorptie materiaal gebruiken.
Materials: inert materiaal
Related Products
Similar products with comparable safety profiles
EBECRYL® 331 radiation curing resins
UFI: N9S2-10PD-V00D-NFDD
EBECRYL® 242N radiation curing resins
---
EBECRYL® CTFA radiation curing resins
---
EBECRYL® IBOA radiation curing resins
---
EBCRYL® 4680 radiation curing resins
UFI: XXH0-U0J6-J00U-460C
EBCRYL® 767 radiation curing resins
UFI: 23J0-U0X0-500T-FV5G
EBCRYL® 284 radiation curing resins
UFI: 2723-F017-W005-EHF6
EBCRYL® 83 radiation curing resins
UFI: NTP0-P0VU-1001-UN71
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Verontreinigde werkkleding mag niet buiten de werkplaats komen Draag beschermende handschoenen en oog/gelaatsbescherming.
Vermijd oververhitting, contaminatie of blootstelling aan direct zonlicht om polymerisering te voorkomen.
Verontreinigde werkkleding mag niet buiten de werkplaats komen
Verwijderd houden van warmtebronnen
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Een procedé volgen dat van een gesloten omgevingssysteem gebruik maakt, indien mogelijk. Als deze stof niet in een gesloten systeem gebruikt wordt, dan moet voorzien worden in een goede omkasting en een plaatselijke afzuiging om blootstelling te beperken bij spuiten en uitharden bij hogere temperaturen.
Draag beschermende handschoenen. Handschoenen voor herhaaldelijke of langdurige blootstelling - niet-limitatieve lijst: Nitrilrubber (NBR), dikte: > 0,56 mm, tot 480 min lang vrij van insijpeling. Handschoenen voor blootstelling op korte termijn/bescherming tegen spatten - niet-limitatieve lijst: Nitrilrubber (NBR), dikte: 0,1 mm, tot 30 min lang vrij van insijpeling. Ongeschikte handschoenen - niet-limitatieve lijst Latexhandschoenen. Gebruik PE-handschoenen als onderhandschoenen voor moeilijke situaties, bijvoorbeeld: hoge blootstelling, onbekende samenstelling of onbekende eigenschappen van de chemicaliën.
Draag oog-/gelaatsbescherming (zuurbril/gelaatsscherm).
Een volledig gezichtsmasker met organisch filterpatroon, type A filter (BP >65°C)
Draag ondoordringbare handschoenen en geschikte beschermende kleding. Afdichtende creme kan samen met handschoenen gebruikt worden voor extra bescherming van de huid.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stabiel
Geen informatie beschikbaar
Kan optreden
Vermijd directe blootstelling aan zonlicht. Vermijd temperaturen boven 60°C. Vermijd wrijving die kan resulteren in temperatuurstijging. Vermijd blootstelling aan sterke UV-bronnen. Verlies van opgeloste lucht. Verlies van initiator van polymerisatie. Vermijd direkt contact met warmtebronnen. Beschermen tegen rechtstreeks zonlicht.
peroxiden, Koper en legeringen, koolstofstaal, ijzer, roest, reactieve metalen, alkaliën
Kooldioxide, Koolmonoxide, fosforhoudende verbindingen
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Beschermen tegen externe warmtebronnen hoger dan +40 °C.
Beschermen tegen externe warmtebronnen hoger dan +40 °C.
Beschermen tegen externe warmtebronnen hoger dan +40 °C.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EBECRYL® 168 radiation curing resins?
The signal word is danger.
What is the physical form of EBECRYL® 168 radiation curing resins?
EBECRYL® 168 radiation curing resins is a vloeistof with donker amber tot bruin color. It has acrylaat odor.
What is EBECRYL® 168 radiation curing resins used for?
Coatings & inkten
What are the hazard statements for EBECRYL® 168 radiation curing resins?
This substance has 2 hazard statements:
- H317: Kan een allergische huidreactie veroorzaken.
- H318: Veroorzaakt ernstig oogletsel.
What is the melting point of EBECRYL® 168 radiation curing resins?
The melting point is Niet beschikbaar and the boiling point is > 100 °C.