Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Molybdenum(VI) oxide
- Product Code
- 203815
- Chemical Name
- Molybdenum(VI) oxide
Regulatory Identifiers
- CAS Number
- 1313-27-5 Check regulations →
- REACH No.
- Een registratienummer is niet beschikbaar voor deze stof omdat de stof of het gebruik is uitgezonderd voor registratie, voor het jaarlijks volume geen registratie vereist is of de registratie is voorzien met een latere registratie deadline.
Identified Uses
Laboratoriumchemikalien, Vervaardiging van stoffen
Manufacturers & Suppliers
Aldrich
distributor
Merck Life Science BV/SRL
distributor
Brusselsesteenweg 288 B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| molybdeen(VI)oxide EC: 215-204-7 | 1313-27-5 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inademen: frisse lucht. Arts waarschuwen.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Een arts raadplegen.
Na oog contact: uitspoelen met ruim voldoende water. Oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Gebruik waternevel, alcoholbestendig schuim, droogpoeder, of kooldioxide.
Molybdeenoxiden. Niet brandbaar. Door brand in de omgeving is het onstaan van gevaarlijke dampen mogelijk.
Houd een veilige afstand.
Firefighter Protection
Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Vermijd stofinhalatie. Vermijd contact met de stof. Zorg voor voldoende ventilatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.
Product niet in de riolering laten komen.
Droog opnemen.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Stof/mengsel niet inademen. Voor voorzorgsmaatregelen zie hoofdstuk 2.2
Goed afgesloten. Droog.
Verontreinigde kleding meteen vervangen. Gebruik huidbeschermende crème. Na het werken met de stof handen en gezicht wassen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Volledig contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Spad contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Deze aanbeveling heeft alleen betrekking op het in het veilgheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN374 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiele instellingen zoals NIOSH (US) of EN166 (EU). beschermbril
Waar ademhaling risico's zich voordoen, gebruik indien nodig een luchtzuiverende gelaatsmasker. Als bescherming tegen deze belastende niveaus, gebruik type N100 (US) of type P3 (EN 143) gelaatsmasker. Als het gelaatsmasker het enige middel van bescherming is, gebruik een volledig-gezicht ademhalingsmasker (zuurstofmasker). Gebruik ademhalingsmaskers getest en goedgekeurd door officiële overheidsinstanties zoals NIOSH (US) of CEN (EU).
beschermende kleding
Product niet in de riolering laten komen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (kamertemperatuur).
Geen gegevens beschikbaar
Gevaar voor ontploffing met: magnesium, gesmolten. Exotherme reactie met: Alkalimetalen, halogeen-halogeen verbindingen, Sterke oxidatiemiddelen, Reductiemiddelen
geen informatie beschikbaar
Geen gegevens beschikbaar
In geval van brand: zie hoofdstuk 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Molybdenum(VI) oxide?
The signal word is warning.
What is the physical form of Molybdenum(VI) oxide?
Molybdenum(VI) oxide is a poeder with lichtgrijs color. It has reukloos odor.
What is Molybdenum(VI) oxide used for?
Laboratoriumchemikalien, Vervaardiging van stoffen
What are the hazard statements for Molybdenum(VI) oxide?
This substance has 3 hazard statements:
- H319: Veroorzaakt ernstige oogirritatie.
- H335: Kan irritatie van de luchtwegen veroorzaken.
- H351: Verdacht van het veroorzaken van kanker.
What is the melting point of Molybdenum(VI) oxide?
The melting point is Smeltpunt/-traject: 795 ℃ - lit. and the boiling point is Geen gegevens beschikbaar.