Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Titanium standard solution, 1,000 mg/l Ti in water with a trace of hydrofluoric acid ARISTAR® single element standard for ICP-MS
- Product Code
- 45696
- Chemical Name
- Titanium standard solution, 1,000 mg/l Ti in water with a trace of hydrofluoric acid
Regulatory Identifiers
- CAS Number
- 7440-32-6 Check regulations →
- REACH No.
- Niet meegedeeld langs de leveranciersketen.
Identified Uses
voor gebruik in het laboratorium en de productie van chemische stoffen.
Manufacturers & Suppliers
VWR International bvba
distributor
Geldenaaksebaan 464, 3001 Leuven, Researchpark Haasrode 2020
+32 16 385 011
Emergency Contacts
Emergency Contact
+44 (0) 1270 502894
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fluorwaterstofzuur EC: 231-634-8 | 7664-39-3 | 1% | Yes |
| Titanium (III) fluoride EC: 236-732-4 | 13470-08-1 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Slachtoffer naar de frisse lucht brengen en warm en rustig houden. Bij ademhalingsklachten of ademstilstand kunstmatige beademing toepassen. Bij irritatie van de ademhalingswegen arts consulteren.
Symptoms: Irritatie van de ademhalingswegen, ademhalingsklachten, ademstilstand.
Verontreinigde of doordrenkte kleding uittrekken.
Bij contact met de ogen direct met geopende oogleden 10 tot 15 minuten met stromend water spoelen. Onbeschadigd oog beschermen. Contactlenzen verwijderen, indien mogelijk. Blijven spoelen.
Nooit een bewustloze persoon of bij optredende krampen iets oraal toedienen.
Immediate Medical Attention
In elk geval van twijfel of indien symptomen optreden, medische hulp inroepen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Blusmaatregelen afstemmen op de omgeving.
geen beperking
In geval van brand kan ontstaan: Pyrolyseproducten, toxisch
In geval van brand: Beschermende ademhalingsapparatuur met perslucht dragen.
Firefighter Protection
Beschermende ademhalingsapparatuur met perslucht dragen.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stofontwikkeling vermijden. Stof niet inademen. Voor voldoende ventilatie zorgen. Persoonlijke beschermingsuitrusting gebruiken.
Niet in de grond/bodem terecht laten komen. Niet in de riolering of open wateren lozen.
Vuil geworden voorwerpen en vloer onder inachtneming van milieuvoorschriften grondig reinigen. In geschikte, gesloten containers verzamelen en verwijderen.
Related Products
Similar products with comparable safety profiles
Gold standard solution, 1,000 mg/l Au in 10% hydrochloric acid ARISTAR® single element standard for ICP-MS
CAS: 7440-57-5
Titanium ICP-standaard herleidbaar tot SRM van NIST (NH₄)₂TiF₆ in H₂O 1000 mg/l Ti Certipur®
---
Nickel standard solution, 1,000 mg/l Ni in dil. nitric acid (from Ni) ARISTAR® standard for ICP
CAS: 7440-02-0
Titanium ICP-standaard herleidbaar tot SRM van NIST (NH₄)₂TiFe ub H₂O 1000 mg/l Ti Certipur®
---
Aluminium standard solution, 10,000 mg/l Al in dil. nitric acid (from Al(NO₃)₃) ARISTAR® standard for ICP
---
Silver standard solution, 1,000 mg/l Ag in dil. nitric acid AVS TITRINORM® standard for AAS
---
Manganese standard solution, 10,000 mg/l Mn in dil. nitric acid (from Mn(OAc)₂) ARISTAR® standard for ICP
---
Rhodium standard solution, 1,000 mg/l Rh in 5% hydrochloric acid AVS TITRINORM® standard for AAS
CAS: 7440-16-6
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Vermijden: Inhalatie. Aanraking met de ogen en de huid vermijden.
Tegen vocht beschermen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technische maatregelen en de toepassing van geschikte arbeidsmethoden hebben voorrang boven het gebruik van persoonlijke beschermingsuitrustingen. Bij open hanteren moeten installaties met plaatselijke afzuiging gebruikt worden.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (kamertemperatuur).
Geen gegevens beschikbaar
De algemeen bekende reactiepartners voor water.
Geen gegevens beschikbaar
Geen gegevens beschikbaar
Geen gegevens beschikbaar
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Titanium standard solution, 1,000 mg/l Ti in water with a trace of hydrofluoric acid ARISTAR® single element standard for ICP-MS?
The signal word is no signal word.
What is the physical form of Titanium standard solution, 1,000 mg/l Ti in water with a trace of hydrofluoric acid ARISTAR® single element standard for ICP-MS?
Titanium standard solution, 1,000 mg/l Ti in water with a trace of hydrofluoric acid ARISTAR® single element standard for ICP-MS is a vloeibaar with kleurloos color. It has geen gegevens beschikbaar odor.
What is Titanium standard solution, 1,000 mg/l Ti in water with a trace of hydrofluoric acid ARISTAR® single element standard for ICP-MS used for?
voor gebruik in het laboratorium en de productie van chemische stoffen.
What is the melting point of Titanium standard solution, 1,000 mg/l Ti in water with a trace of hydrofluoric acid ARISTAR® single element standard for ICP-MS?
The melting point is Geen gegevens beschikbaar and the boiling point is Geen gegevens beschikbaar.