NextSDS Logo
Safety Data Sheet NL

Resorcinol synthese kwaliteit

CAS 108-46-3

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Resorcinol synthese kwaliteit
Product Code
822303
Chemical Name
Resorcinol

Regulatory Identifiers

CAS Number
108-46-3 Check regulations →
REACH No.
Voor deze stof is geen registratienummer beschikbaar omdat op grond van artikel 2 van de REACH-verordening (EG) nr. 1907/2006 de stof of het gebruik ervan is vrijgesteld van registratie, voor de jaarlijkse tonnage ge en registratie is vereist of omdat voor de registratie een latere registratiedatum geldt.

Identified Uses

Synthese chemicalie

Manufacturers & Suppliers

M

Merck KGaA

manufacturer

64271 Darmstadt, Duitsland

+49 6151 72-2440

M

Merck KGaA

manufacturer

Darmstadt

+49 6151 722440

Emergency Contacts

Merck KGaA

+49 6151 722440

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
Aquatic Acute Cat. 1 H400

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H302 Schadelijk bij inslikken.
H315 Veroorzaakt huidirritatie.
H319 Veroorzaakt ernstige oogirritatie.
H400 Zeer giftig voor in het water levende organismen.

Precautionary Statements

P273 Voorkom lozing in het milieu.
P302 + P352 BIJ CONTACT MET DE HUID: met veel water en zeep wassen.
P305 + P351 + P338 BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Resorcinol EC: 203-585-2 108-46-3 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

frisse lucht.

Skin contact

Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen.

Eye contact

uitspoelen met ruim voldoende water. Oogarts raadplegen.

Ingestion

slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Toedienen: actieve kool (norit) (20-40 g in 10 % suspensie). Een arts raadplegen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water, Kooldioxide (CO2), Schuim, Droogpoeder

Unsuitable media

Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.

Specific hazards

Brandbaar. Vormt ontplofbare mengsels met lucht bij sterke verhitting. Gevaar voor stofexplosie. In geval van brand kunnen er gevaarlijke brandgassen en dampen ontstaan.

Firefighter Protection

Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Vermijd contact met de stof. Zorg voor voldoende ventilatie. Vermijd stofinhalatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.

Environmental

Afval niet in de gootsteen werpen.

Cleanup methods

Droog opnemen. Vervuild oppervlak schoonmaken.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Voorzorgsmaatregelen op het etiket naleven.

Storage

Goed afgesloten. Droog. Beschermd tegen licht.

Hygiene

Verontreinigde kleding meteen vervangen. Gebruik huidbeschermende crème. Na het werken met de stof handen en gezicht wassen.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Technische maatregelen en geschikte werkprocedures zouden prioriteit moeten hebben boven het gebruik van persoonlijke beschermingsmiddelen. Zie paragraaf 7.1.

Hands

volledig contact: Handschoenenmateriaal Nitrilrubber, Handschoendikte: 0,11 mm, doorbraaktijd: > 480 min; spat contact: Handschoenenmateriaal Nitrilrubber, Handschoendikte: 0,11 mm, doorbraaktijd: > 480 min; De te gebruiken beschermende handschoenen, moeten voldoen aan de specificaties van EG regeling 89/686/EEG en de daaruit voortkomende norm EN374, bij voorbeeld KCL 741 Dermatril® L (volledig contact), KCL 741 Dermatril® L (spat contact). De bovengenoemde doorbraak tijdens, werden met materiaalproeven van de aanbevolen handschoenen door KCL in laboratoriummetingen vlgs. EN374 onderzocht. Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN374 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de). De veiligheidsinformatiebladen van de catalogusartikelen staan ter beschikking op www.merckgroup.com

Eyes

Veiligheidsbril

Respiratory

nodig indien stofvorming plaatsvindt. Aanbevolen filtertype: Filter A-(P2) De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.

Skin/Body

beschermende kleding

Environmental

Afval niet in de gootsteen werpen.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Auto Ignition Temperature
605 °C Methode: DIN 51794
Boiling Point
281 °C bij 1.013 hPa
Vapor Density
---
Solubility In Water
1.000 g/l bij 20 °C
Relative Density
---
Odor
onaangenaam
Metal Corrosion
---
Solubility In Fat
---
Kinematic Viscosity
---
Lower Explosive Limit
1,4 %(V)
Appearance
---
Molecular Weight
---
Colour
wit
Flammability
Geen gegevens beschikbaar.
Density
circa 1,28 g/cm³ bij 20 °C
Odor Threshold
Geen gegevens beschikbaar.
Voc Content
---
Decomposition Temperature
Geen gegevens beschikbaar.
Flash Point
127 °C Methode: c.c.
Dynamic Viscosity
Geen gegevens beschikbaar.
Evaporation Rate
Geen gegevens beschikbaar.
Physical State Data
solid
Upper Explosive Limit
Geen gegevens beschikbaar.
Bulk Density
circa 600 - 700 kg/m³
Vapor Pressure
0,1 hPa bij 20 °C
Softening Point
---
Solubility
---
Cloud Point
---
Relative Evaporation Rate
---
Solidification Point
---
Colour Intensity
---
Freezing Point
---
Physical State
vast
State Under Standard Conditions
---
Properties Status
---
Partition Coefficient
log Pow: 0,93 (20 °C) Richtlijn test OECD 107 Een bio-accumulatie is niet te verwachten.
Ph
circa 4 - 6 bij 100 g/l 20 °C
Crystallisation Point
---
Melting Point
109 - 111 °C
Explosive Limits
---
Form
vast
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Lichtovergevoeligheid, Luchtgevoelig.

Reactivity

zeer reactief. Gevaar voor stofexplosie. Vormt ontplofbare mengsels met lucht bij sterke verhitting. Het kritische bereik is vanaf ca. 15 Kelvin lager dan het vlampunt.

Hazardous reactions

Gevaar voor ontploffing met: Salpeterzuur. Exotherme reactie met: Ammoniak, Aminen, organische stikstofverbindingen, Sterke oxidatiemiddelen. Heftige reacties mogelijk met: alkalien, metaalzouten, IJzer, Zuuranhydriden, Zuurchloriden.

Avoid

Sterke verhitting.

Incompatible

geen informatie beschikbaar

Decomposition

geen informatie beschikbaar

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
2876
Shipping Name
Resorcinol
Transport Class
6.1
Packing Group
III
ADR

ja

IMDG

ja

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Resorcinol synthese kwaliteit?

The signal word is warning.

What is the physical form of Resorcinol synthese kwaliteit?

Resorcinol synthese kwaliteit is a vast with wit color. It has onaangenaam odor.

What is Resorcinol synthese kwaliteit used for?

Synthese chemicalie

What are the hazard statements for Resorcinol synthese kwaliteit?

This substance has 4 hazard statements:

  • H302: Schadelijk bij inslikken.
  • H315: Veroorzaakt huidirritatie.
  • H319: Veroorzaakt ernstige oogirritatie.
  • H400: Zeer giftig voor in het water levende organismen.

What is the melting point of Resorcinol synthese kwaliteit?

The melting point is 109 - 111 °C and the boiling point is 281 °C bij 1.013 hPa.