Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- IJzer(III)chloride-hexahydraat voor analyse EMSURE® ACS, Reag. Ph Eur
- Product Code
- 103943
- Chemical Name
- IJzer(III)chloride-hexahydraat
Regulatory Identifiers
- CAS Number
- 10025-77-1 Check regulations →
- REACH No.
- 01-2119497998-05-XXXX
Identified Uses
Reagens voor analyse
Manufacturers & Suppliers
Merck KGaA
manufacturer
64271 Darmstadt, Duitsland
+49 6151 72-2440
Merck KGaA
manufacturer
Darmstadt
+49 6151 722440
Emergency Contacts
Merck KGaA
+49 6151 722440
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| iron(III) chloride hexahydrate EC: 231-729-4 | 10025-77-1 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inhalatie: frisse lucht.
Symptoms: Hoesten, Kortademigheid
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen.
Na oog contact: uitspoelen met ruim voldoende water. Contactlenzen uitnemen.
Symptoms: Gevaar voor ernstig oogletsel
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen).
Symptoms: Misselijkheid, Braken
Immediate Medical Attention
Onmiddellijk een oogarts raadplegen. Een arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Gebruik blusmiddelen die geschikt zijn voor de plaatselijke omstandigheden en de omgeving.
Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.
Niet brandbaar. Door brand in de omgeving is het ontstaan van gevaarlijke dampen mogelijk.
Gassen/dampen/nevels neerslaan met behulp van een watersproeistraal.
Firefighter Protection
Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Vermijd contact met de stof. Vermijd stofinhalatie. Zorg voor voldoende ventilatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.
Afval niet in de gootsteen werpen.
Droog opnemen. Vervuild oppervlak schoonmaken.
Related Products
Similar products with comparable safety profiles
IJzer(III)chloride-hexahydraat voor analyse EMSURE® ACS,Reag. Ph Eur
CAS: 10025-77-1
IJzer(III)chloride-hexahydraat voor analyse EMSURE® ACS,Reag. Ph Eur
CAS: 10025-77-1
IJzer(II)sulfaat-heptahydraat voor analyse EMSURE® ACS, ISO, Reag. Ph Eur
CAS: 7782-63-0
IJzer(II)sulfaat-heptahydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7782-63-0
IJzer(III)nitraat|nonahydraat voor analyse EMSURE® ACS,Reag. Ph Eur
CAS: 7782-61-8
Kobalt(II)chloride-hexahydraat voor analyse EMSURE® ACS, Reag. Ph Eur
CAS: 7791-13-1
Kobalt(II)chloride-hexahydraat voor analyse EMSURE® ACS, Reag. Ph Eur
CAS: 7791-13-1
Ammoniumijzer(III)sulfaat-dodecahydraat voor analyse EMSURE® ACS, ISO, Reag. Ph Eur
CAS: 7783-83-7
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Voorzorgsmaatregelen op het etiket naleven.
Goed afgesloten. Droog.
Verontreinigde kleding meteen vervangen. Gebruik huidbeschermende crème. Na het werken met de stof handen en gezicht wassen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Technische maatregelen en geschikte werkprocedures zouden prioriteit moeten hebben boven het gebruik van persoonlijke beschermingsmiddelen. Zie paragraaf 7.1.
volledig contact: Handschoenenmateriaal Nitrilrubber Handschoendikte: 0,11 mm Doorbraaktijd: > 480 min spat contact: Handschoenenmateriaal Nitrilrubber Handschoendikte: 0,11 mm Doorbraaktijd: > 480 min De te gebruiken beschermende handschoenen, moeten voldoen aan de specificaties van EG regeling 89/686/EEG en de daaruit voortkomende norm EN374, bij voorbeeld KCL 741 Dermatril® L (volledig contact), KCL 741 Dermatril® L (spat contact). De bovengenoemde doorbraak tijdens, werden met materiaalproeven van de aanbevolen handschoenen door KCL in laboratoriummetingen vlgs. EN374 onderzocht.
Nauw aansluitende veiligheidsstofbril
nodig indien stofvorming plaatsvindt. Aanbevolen filtertype: Filter B-(P2) De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
beschermende kleding
Afval niet in de gootsteen werpen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
gevoelig voor vochtigheid
Corrosief bij aanraking met metalen
Gevaar voor ontploffing met: Alkalimetalen, Ethyleenoxide
Sterke verhitting (decompositie). Blootstelling aan vocht.
Metalen, Vloeistaal
bij brand: Zie hoofdstuk 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for IJzer(III)chloride-hexahydraat voor analyse EMSURE® ACS, Reag. Ph Eur?
The signal word is danger.
What is the physical form of IJzer(III)chloride-hexahydraat voor analyse EMSURE® ACS, Reag. Ph Eur?
IJzer(III)chloride-hexahydraat voor analyse EMSURE® ACS, Reag. Ph Eur is a vast appearing as geelbruin with geelbruin color. It has naar chloor odor.
What is IJzer(III)chloride-hexahydraat voor analyse EMSURE® ACS, Reag. Ph Eur used for?
Reagens voor analyse
What are the hazard statements for IJzer(III)chloride-hexahydraat voor analyse EMSURE® ACS, Reag. Ph Eur?
This substance has 3 hazard statements:
- H302: Schadelijk bij inslikken.
- H315: Veroorzaakt huidirritatie.
- H318: Veroorzaakt ernstig oogletsel.
What is the melting point of IJzer(III)chloride-hexahydraat voor analyse EMSURE® ACS, Reag. Ph Eur?
The melting point is 37 °C and the boiling point is Niet van toepassing.