Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ammoniumperoxodisulfaat voor analyse EMSURE® ACS,Reag. Ph Eur
- Product Code
- 1.01201
- Chemical Name
- Ammoniumperoxodisulfaat
Regulatory Identifiers
- CAS Number
- 7727-54-0 Check regulations →
- REACH No.
- Een registratienummer is niet beschikbaar voor deze stof omdat de stof of het gebruik is uitgezonderd voor registratie, voor het jaarlijks volume geen registratie vereist is of de registratie is voorzien met een latere registratie deadline.
Identified Uses
Reagens voor analyse
Manufacturers & Suppliers
Millipore
manufacturer
Merck Life Science BV/SRL
distributor
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ammoniumperoxodisulfaat EC: 231-786-5 | 7727-54-0 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inademen: frisse lucht. Arts waarschuwen.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Een arts raadplegen.
Na oog contact: uitspoelen met ruim voldoende water. Oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Gebruik blusmiddelen die geschikt zijn voor de plaatselijke omstandigheden en de omgeving.
Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.
Niet brandbaar. Werkt brandbevorderend door zuurstofafgifte. Door brand in de omgeving is het ontstaan van gevaarlijke dampen mogelijk.
Houd een veilige afstand.
Firefighter Protection
Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Vermijd stofinhalatie. Vermijd contact met de stof. Zorg voor voldoende ventilatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.
Product niet in de riolering laten komen.
Voorzichtig opnemen.
Related Products
Similar products with comparable safety profiles
Ammoniumsulfaat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7783-20-2
Ammoniumsulfaat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7783-20-2
Ammoniumacetaat voor analyse EMSURE® ACS, Reag. Ph Eur
CAS: 631-61-8
Ammoniumacetaat voor analyse EMSURE® ACS, Reag. Ph Eur
---
Ammoniumacetaat voor analyse EMSURE® ACS, Reag. Ph Eur
---
Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 12125-02-9
Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 12125-02-9
Ammoniumchloride voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 12125-02-9
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Werken onder afzuiging. Stof/mengsel niet inademen.
Droog. Goed afgesloten. Achter slot bewaren of in een ruimte die alleen toegankelijk is voor vakbekwame of geautoriseerde personen. Niet opslaan in nabijheid van brandbare materialen. Aanbevolen bewaartemperatuur, zie productlabel.
Verontreinigde kleding meteen vervangen. Gebruik huidbeschermende crème. Na het werken met de stof handen en gezicht wassen.
Verwijderd houden van open vuur, hete oppervlakken en ontstekingsbronnen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Volledig contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Spad contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN 16523-1 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU). beschermbril
nodig indien stofvorming plaatsvindt. Onze aanbevelingen voor het filteren van de ademhalingsbescherming zijn gebaseerd op de volgende normen: DIN EN 143, DIN 14387 en andere geldende normen m.b.t. het gebruikte ademhalingsbeschermingssysteem. Aanbevolen filtertype: Filter type P2. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
beschermende kleding
Product niet in de riolering laten komen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (kamertemperatuur).
Geen gegevens beschikbaar
Gevaar voor ontploffing met: Kans op ontbranding of vorming van brandbare gassen of dampen met: Exotherme reactie met: sterke basen, alkalien, brandbare stoffen, IJzer, Zink, waterstofperoxide, peroxiverbindingen, Koper, zilververbindingen, Metaalpoeders
geen informatie beschikbaar
Geen gegevens beschikbaar
In geval van brand: zie hoofdstuk 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1444
- Shipping Name
- AMMONIUMPERSULFAAT
- Transport Class
- 5.1
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Ammoniumperoxodisulfaat voor analyse EMSURE® ACS,Reag. Ph Eur?
The signal word is danger.
What is the physical form of Ammoniumperoxodisulfaat voor analyse EMSURE® ACS,Reag. Ph Eur?
Ammoniumperoxodisulfaat voor analyse EMSURE® ACS,Reag. Ph Eur is a vast with wit color. It has geen gegevens beschikbaar odor.
What is Ammoniumperoxodisulfaat voor analyse EMSURE® ACS,Reag. Ph Eur used for?
Reagens voor analyse
What are the hazard statements for Ammoniumperoxodisulfaat voor analyse EMSURE® ACS,Reag. Ph Eur?
This substance has 7 hazard statements:
- H272: Kan brand bevorderen; oxiderend.
- H302: Schadelijk bij inslikken.
- H315: Veroorzaakt huidirritatie.
- H317: Kan een allergische huidreactie veroorzaken.
- H319: Veroorzaakt ernstige oogirritatie.
- H334: Kan bij inademing allergie- of astmasymptomen of ademhalingsmoeilijkheden veroorzaken.
- H335: Kan irritatie van de luchtwegen veroorzaken.
What is the melting point of Ammoniumperoxodisulfaat voor analyse EMSURE® ACS,Reag. Ph Eur?
The melting point is Ontleedt alvorens te smelten. and the boiling point is Ontleedt onder het kookpunt..