Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Dimethyl dicarbonaat synthese kwaliteit
- Product Code
- 8.18758
- Chemical Name
- Dimethyl dicarbonaat
Regulatory Identifiers
- CAS Number
- 4525-33-1 Check regulations →
- REACH No.
- Een registratienummer is niet beschikbaar voor deze stof omdat de stof of het gebruik is uitgezonderd voor registratie, voor het jaarlijks volume geen registratie vereist is of de registratie is voorzien met een latere registratie deadline.
Identified Uses
Synthese chemicalie
Manufacturers & Suppliers
Millipore
Merck Life Science BV/SRL
manufacturer
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Dimethyl dicarbonate EC: 224-859-8 | 4525-33-1 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inademen: frisse lucht. Direct een arts waarschuwen. Bij ademstilstand: Meteen mechanische beademing, eventueel zuurstof toedienen.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Onmiddellijk een arts waarschuwen.
Na oog contact: uitspoelen met ruim voldoende water. Onmiddellijk een oogarts raadplegen. Contactlenzen uitnemen.
Na inslikken: slachtoffer water laten drinken (niet meer dan twee glazen), braken voorkomen (perforatiegevaar!). Onmiddellijk een arts waarschuwen. Niet proberen te neutraliseren.
Immediate Medical Attention
Direct een arts waarschuwen bij inademing, huidcontact, oogcontact en inslikken.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Schuim Kooldioxide (CO2) Droogpoeder
Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.
Koolstofoxiden. Brandbaar. Dampen zijn zwaarder dan lucht en verspreiden zich mogelijk over de vloer. Vormt ontplofbare mengsels met lucht bij sterke verhitting. In geval van brand kunnen er gevaarlijke brandgassen en dampen ontstaan.
Houd een veilige afstand.
Firefighter Protection
Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Dampen, aerosol niet inademen. Vermijd contact met de stof. Zorg voor voldoende ventilatie. Verwijderd houden van warmte en ontstekingsbronnen. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.
Voorzichtig opnemen met vloeistofabsorberend materiaal (b.v. Chemizorb®). Vervuild oppervlak schoonmaken.
Materials: vloeistofabsorberend materiaal (b.v. Chemizorb®)
Related Products
Similar products with comparable safety profiles
Dichloormethaan synthese kwaliteit
---
Diisobutyl keton synthese kwaliteit
---
Diethyleenglycol synthese kwaliteit
CAS: 111-46-6
1-Decanol synthese kwaliteit
CAS: 112-30-1
1-Dodecanol synthese kwaliteit
CAS: 112-53-8
Diethyleenglycolmonoethylether synthese kwaliteit
CAS: 111-90-0
Diethyleenglycolmonomethylether synthese kwaliteit
CAS: 111-77-3
1-Tetradecanol synthese kwaliteit
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Werken onder afzuiging. Stof/mengsel niet inademen. Ontwikkeling van dampen/aerosolen vermijden.
Goed afgesloten. Op een goed geventileerde plaats bewaren. Achter slot bewaren of in een ruimte die alleen toegankelijk is voor vakbekwame of geautoriseerde personen. Aanbevolen bewaartemperatuur, zie productlabel.
Verontreinigde kleding meteen vervangen. Gebruik huidbeschermende crème. Na het werken met de stof handen en gezicht wassen.
Verwijderd houden van open vuur, hete oppervlakken en ontstekingsbronnen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Volledig contact: Materiaal: butylrubber, Minimale laagdikte: 0,7 mm, Doorbraaktijd: 480 min, Getest materiaal: Butoject® (KCL 898). Spad contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,4 mm, Doorbraaktijd: 60 min, Getest materiaal: Camatril® (KCL 730 / Aldrich Z677442, Maat M). Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN374 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU). Nauw aansluitende veiligheidsstofbril
Aanbevolen filtertype: Ademhalingsmasker. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
beschermende kleding
Product niet in de riolering laten komen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (ka mertemperatuur).
Vormt ontplofbare mengsels met lucht bij sterke verhitting. Het kritische bereik is vanaf ca. 15 Kelvin lager dan het vlampunt.
Heftige reacties mogelijk met: Sterke oxidatiemiddelen, Sterke basen. Exotherme reactie met: Water
Sterke verhitting.
Geen gegevens beschikbaar
In geval van brand: zie hoofdstuk 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2927
- Shipping Name
- GIFTIGE ORGANISCHE VLOEISTOF, BIJTEND, N.E.G. (Dimethyl dicarbonate)
- Transport Class
- 6.1 (8)
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Dimethyl dicarbonaat synthese kwaliteit?
The signal word is danger.
What is the physical form of Dimethyl dicarbonaat synthese kwaliteit?
Dimethyl dicarbonaat synthese kwaliteit is a vloeibaar with kleurloos color. It has geen gegevens beschikbaar odor.
What is Dimethyl dicarbonaat synthese kwaliteit used for?
Synthese chemicalie
What are the hazard statements for Dimethyl dicarbonaat synthese kwaliteit?
This substance has 3 hazard statements:
- H302: Schadelijk bij inslikken.
- H314: Veroorzaakt ernstige brandwonden en oogletsel.
- H330: Dodelijk bij inademing.
What is the melting point of Dimethyl dicarbonaat synthese kwaliteit?
The melting point is Geen gegevens beschikbaar and the boiling point is circa 172 °C - valt uiteen.