Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EGASOL MD
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Textielhulpmiddel
Manufacturers & Suppliers
CHT Germany GmbH
manufacturer
Bismarckstraße 102, 72072 Tübingen, Duitsland
+49 7071 154 0
CHT Switzerland AG
manufacturer
Kriessernstrasse 20, 9462 Montlingen, Zwitserland
+41 71 763 88 11
CHT Belgium NV
manufacturer
Otegemstraat 30, 8550 Zwevegem, Belgium
+32 56 203114
CHT
Emergency Contacts
Emergency Contact
+49 7071 154 0
24 uur
Emergency Contact
+41 71 763 88 11
24 uur
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| zouten en esters van MCPA EC: 204-402-9 | 120-51-4 | 30 - 50% | Yes |
| Poly(oxy-1,2-ethanediyl), alpha-[tris(1-phenylethyl)phenyl]-omega-hydroxy- | 99734-09-5 | 2.5 - 10% | Yes |
| 2-[2-(2-butoxye-thoxy)ethoxy]ethanol EC: 205-592-6 | 143-22-6 | 3 - 10% | Yes |
| Poly(oxy-1,2-ethandiyl),alpha-sulfo-omega-[2,4,6-tris(1-phenylethyl) phenoxy]-, Ammoniumzout | 119432-41-6 | 3 - 10% | Yes |
| 2-(2-butoxyethoxy)ethanol EC: 203-961-6 | 112-34-5 | 3 - 10% | Yes |
| 3,6,9,12-Tetraoxahexadecan-1-ol EC: 216-322-1 | 1559-34-8 | 1 - 3% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
In de frisse lucht brengen. Indien symptomen aanhouden, een arts raadplegen.
Onmiddellijk afwassen met zeep en veel water. Indien symptomen aanhouden, een arts raadplegen.
Bij aanraking met de ogen lenzen uitdoen en onmiddellijk met veel water spoelen, ook onder de oogleden, gedurende ten-minste 15 minuten. Onmiddellijk een arts waarschuwen.
Mond spoelen met water. GEEN braken opwekken. Onmiddellijk een arts waarschuwen.
Immediate Medical Attention
Onmiddellijk een arts waarschuwen bij aanraking met de ogen en bij inslikken.
Medical Treatment
Symptomatisch behandelen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Kooldioxide (CO2), Droogpoeder, Alcoholbestendig schuim, Waternevel
Bij brand worden gevaarlijke ontledingsproducten gevormd.
Bij brand, de rook en dampen niet inademen.
Firefighter Protection
Bij brand een persluchtmasker dragen.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Persoonlijke beschermingsmiddelen gebruiken.
Het product mag niet wegvloeien in riool, waterstroom of bodem.
Opnemen in inert absorberend materiaal (b.v. zand, kiezelgur, zuurbindingsmiddel, universeel bindingsmiddel, zaagsel). Verontreinigd oppervlak grondig reinigen.
Materials: inert absorberend materiaal (b.v. zand, kiezelgur, zuurbindingsmiddel, universeel bindingsmiddel, zaagsel)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Aanraking met ogen, huid en kleding vermijden. Dampen, aerosol niet inademen. Verontreinigde kleding onmiddellijk uittrekken.
Beschermen tegen vorst.
Gebruiken volgens gangbare regels en praktijken met betrekking tot industriële hygiëne en veiligheid.
Geen speciale beschermende maatregelen tegen brand vereist.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Vetstoffen met werkplaats grenswaarden in vloeibare bereidingen veroorzaken geen stofbelasting (expositie) in de werkplaats, daar ze niet in adembare vorm voorkomen. Een expositie kan in aerosolvorm optreden of bij drogen van de vloeibaarheid van de vetstof blijft dit mogelijk in een fijnverdeelde vorm. Zorg voor voldoende luchtverversing en/of afzuiging op de werkplaats.
Materiaal : butylrubber, Doorbraaktijd : > 480 min, Handschoendikte : >= 0,5 mm, Beschermingsindex : Klasse 6. Materiaal : Gefluorideerd rubber, Doorbraaktijd : > 480 min, Handschoendikte : >= 0,4 mm, Beschermingsindex : Klasse 6. Opmerkingen : De keuze voor een geschikte handschoen is niet alleen afhankelijk van het materiaal, maar ook van andere kwaliteitsaspecten, en verschilt van fabrikant tot fabrikant. De verkregen doordrenkingstijden volgens EN 374 Deel III worden niet vastgesteld onder normale werkomstandigheden. Daarom wordt een maximale gebruikstijd aangeraden van 50% van de doordrenkingstijd.
Veiligheidsbril
Op niet genoeg verluchte werkplaatsen en bij spuitverwerkingen is adembescherming noodzakelijk. Aanbevolen filtertype: Combinatiefilter A/P
Draag geschikte beschermende kleding.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel.
Geen specifieke gevaren te noemen.
Onder normale gebruiksomstandigheden zijn geen gevaarlijke reacties waargenomen.
Niet van toepassing
Oxidatiemiddelen
Geen ontleding indien bewaard en toegepast zoals aangegeven.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- MILIEUGEVAARLIJKE VLOEISTOF, N.E.G.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EGASOL MD?
The signal word is warning.
What is the physical form of EGASOL MD?
EGASOL MD is a vloeibaar appearing as geel, geelbruin, helder with geel, geelbruin, helder color. It has kenmerkend odor.
What is EGASOL MD used for?
Textielhulpmiddel
What are the hazard statements for EGASOL MD?
This substance has 2 hazard statements:
- H319: Veroorzaakt ernstige oogirritatie.
- H411: Giftig voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of EGASOL MD?
The melting point is Geen gegevens beschikbaar and the boiling point is Geen gegevens beschikbaar..