Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TUBASSIST FIX 104 W
- Chemical Name
- 2-ethyl-2-[[3-(2-methylaziridin-1-yl)propionyl]methyl]propane-1,3-diyl b is(2-methylaziridine-1-propionate)
Regulatory Identifiers
- CAS Number
- N/A
- EC Number
- 264-763-3 Check regulations →
Identified Uses
Grondstof voor textielhulpmiddelen
Manufacturers & Suppliers
CHT R. BEITLICH GMBH
manufacturer
Bismarckstraße 102, 72072 Tübingen, Duitsland
+49(0)70 71 15 40
BEZEMA AG
manufacturer
Kriessernstrasse 20, 9462 Montlingen, Zwitserland
+41(0)71 763 88 11
CHT BELGIUM NV
manufacturer
President Kennedypark 39, 8500 Kortrijk, Belgium
+32(0)56 20 31 14
CHT BEZEMA
manufacturer
Emergency Contacts
Emergency Contact
+49(0)70 71 15 40
24 uur
Emergency Contact
+41(0)71 763 88 11
24 uur
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-ethyl-2-[[3-(2-methylaziridin-1-yl)propionyl]methyl]propane-1,3-diyl b is(2-methylaziridine-1-propionate) EC: 264-763-3 | 64265-57-2 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
In de frisse lucht brengen. Indien symptomen aanhouden, een arts raadplegen.
Onmiddellijk afwassen met zeep en veel water. Indien symptomen aanhouden, een arts raadplegen.
Bij aanraking met de ogen lenzen uitdoen en onmiddellijk met veel water spoelen, ook onder de oogleden, gedurende ten-minste 15 minuten. Onmiddellijk een arts waarschuwen.
Mond spoelen met water. GEEN braken opwekken. Onmiddellijk een arts waarschuwen.
Immediate Medical Attention
Onmiddellijk een arts waarschuwen.
Medical Treatment
Geen gegevens beschikbaar.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Kooldioxide (CO2) Watersproeistraal Droogpoeder Schuim
Sterke waterstraal
Bij brand worden gevaarlijke ontledingsproducten gevormd. Bij een brand kan vrijkomen: Koolstofoxiden stikstofoxiden (NOx)
Firefighter Protection
Bij brand een persluchtmasker dragen.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Het product mag niet wegvloeien in riool, waterstroom of bodem. Plaatselijke wettelijke voorschriften in acht nemen.
Opnemen in inert absorberend materiaal (b.v. zand, kiezelgur, zuurbindingsmiddel, universeel bindingsmiddel, zaagsel). Verontreinigd oppervlak grondig reinigen.
Materials: inert absorberend materiaal (b.v. zand, kiezelgur, zuurbindingsmiddel, universeel bindingsmiddel, zaagsel)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Zorg voor voldoende luchtverversing en/of afzuiging op de werkplaats. Verwijderd houden van warmte en ontstekingsbronnen. Niet blootstellen aan direct zonlicht. Gebruik waternevel om ongeopende containers af te koelen.
Beschermen tegen temperaturen onder de +5 °C. Beschermen tegen temperaturen boven de 25 °C. Tanks op een goed geventileerde plaats bewaren. Beschermen tegen vocht. Tanks ondoordringbaar gesloten houden. Tegen hitte en directe zonnestralen beschermen.
Verwijderd houden van warmte en ontstekingsbronnen. Gebruik waternevel om ongeopende containers af te koelen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Zorg voor voldoende luchtverversing en/of afzuiging op de werkplaats.
butylrubber Beschermingsindex Klasse 4 Penetratietijd: > 120 min Handschoendikte: >= 0,5 mm De keuze voor een geschikte handschoen is niet alleen afhankelijk van het materiaal, maar ook van andere kwaliteitsaspecten, en verschilt van fabrikant tot fabrikant. De verkregen doordrenkingstijden volgens EN 374 Deel III worden niet vastgesteld onder normale werkomstandigheden. Daarom wordt een maximale gebruikstijd aangeraden van 50% van de doordrenkingstijd.
Nauw aansluitende veiligheidsstofbril
Op niet genoeg verluchte werkplaatsen en bij spuitverwerkingen is adembescherming noodzakelijk. Filter AX
Beschermingskleding
Het product mag niet wegvloeien in riool, waterstroom of bodem. Plaatselijke wettelijke voorschriften in acht nemen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stabiel onder de aanbevolen opslagomstandigheden.
Geen specifieke gevaren te noemen.
Onder normale gebruiksomstandigheden zijn geen gevaarlijke reacties waargenomen.
Beschermen tegen vorst, hitte en zonlicht.
Sterke zuren en sterke basen, Oxidatiemiddelen
Geen ontleding indien bewaard en toegepast zoals aangegeven. Thermische ontleding : 110 °C
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
zie hoofdstuk 6 - 8
zie hoofdstuk 6 - 8
zie hoofdstuk 6 - 8
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TUBASSIST FIX 104 W?
The signal word is danger.
What is the physical form of TUBASSIST FIX 104 W?
TUBASSIST FIX 104 W is a vloeibaar with geel color. It has amine-achtig odor.
What is TUBASSIST FIX 104 W used for?
Grondstof voor textielhulpmiddelen
What are the hazard statements for TUBASSIST FIX 104 W?
This substance has 4 hazard statements:
- H315: Veroorzaakt huidirritatie.
- H317: Kan een allergische huidreactie veroorzaken.
- H318: Veroorzaakt ernstig oogletsel.
- H341: Verdacht van het veroorzaken van genetische schade.
What is the melting point of TUBASSIST FIX 104 W?
The melting point is -30 °C and the boiling point is > 35 °C.