Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Blanose™ REF CMC 7MX ZS Sodium Carboxymethylcellulose
- Product Code
- 433200
- Chemical Name
- HIGH PURITY SODIUM CARBOXYMETHYLCELLULOSE, SODIUM CMC, 99,5%
Regulatory Identifiers
- CAS Number
- 9004-32-4 Check regulations →
- EC Number
- 618-378-6 Check regulations →
Identified Uses
Reologiehulpstof
Manufacturers & Suppliers
Ashland
manufacturer
Postbus 8619 NL3009 AP, Rotterdam Nederland
(010) 497 5000
Emergency Contacts
Emergency Contact
+1-800-274-5263
Emergency Contact
001-859-357-3564
Emergency Contact
070/245.245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Stofnaam : HIGH PURITY SODIUM CARBOXYMETHYLCELLULOSE, SODIUM CMC, 99,5%; Chemische omschrijving : organisch
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| HIGH PURITY SODIUM CARBOXYMETHYLCELLULOSE, SODIUM CMC, 99,5% | 9004-32-4 | 99.5% | No |
Notes
Geen gevaarlijke ingrediënten
First Aid Measures
Emergency procedures for chemical exposure incidents
Bij bewusteloosheid stabiele zijligging toepassen en medische hulp inroepen. Indien symptomen aanhouden, een arts raadplegen.
Afwassen met zeep en veel water.
Contactlenzen uitnemen. Onbeschadigd oog beschermen. Indien oogirritatie aanhoudt een specialist raadplegen.
Ademhalingswegen vrijhouden. Geen melk of alcoholische dranken geven. Nooit een bewusteloos persoon laten drinken (of eten). Indien symptomen aanhouden, een arts raadplegen.
Medical Treatment
Symptomatisch behandelen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Gebruik waternevel, alcoholbestendig schuim, droogpoeder, of kooldioxide.
Geen gegevens beschikbaar.
Standaardprocedure voor chemische branden.
Firefighter Protection
Draag bij brand een autonoom ademhalingsapparaat.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Persoonlijke beschermingsmiddelen gebruiken.
Voorkom ongecontroleerde lozing van product in het milieu.
Opnemen en verwijderen zonder stofvorming te veroorzaken. Bijeenvegen en opscheppen.
Related Products
Similar products with comparable safety profiles
Blanose™ REF CMC 7M
CAS: 9004-32-4
CARBOXYMETHYL CELLULOSE, SODIUM
---
Natrosol™ 250 MBR Hydroxyethylcellulose
---
(Hydroxypropyl)methyl cellulose
CAS: 9004-65-3
Natrosol™ PLUS 330 PA Modified hydroxyethylcellulose
---
THINNER CELLULOSE (S010) MDS2R 194L
UFI: H8UE-00TD-9008-HRFW
SELEMIX 1-215 NITROCELLULOSE THINNER
---
Methylcellulose poeder
CAS: 9032-42-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Vermijd stofvorming. Vermijd inademing, inslikken en aanraking met de huid en ogen. Voor persoonlijke bescherming zie Rubriek 8. Niet roken, eten en drinken op de werkplek.
Container goed afgesloten bewaren op een droge en goed geventileerde plaats. Opslaan bij kamertemperatuur in de originele container. Op een droge en koele plaats bewaren. Niet blootstellen aan direct zonlicht.
Algemene industriële hygiëne toepassen.
Zorg voor geschikte afzuigventilatie op plaatsen waar stof ontstaat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Verschaf voldoende mechanische (algemene en / of plaatselijke uitlaat) ventilatie om blootstelling onder de normen voor blootstelling aan (indien van toepassing) of onder het niveau dat bekende oorzaak, verdachte of duidelijke nadelige gevolgen te handhaven.
Materiaal : butylrubber; Doorbraaktijd : 480 min; Handschoendikte : > 0,5 mm. Opmerkingen : De feitelijke doordrenkingstijd kan worden verkregen bij de fabrikant van de beschermhandschoenen en moet in acht worden genomen. Handschoenen moeten weggegooid en vervangen worden bij tekenen van degradatie of chemische doorbraak. De gekozen veiligheidshandschoenen moeten voldoen aan de specificaties van de verordening (EU) 2016/425 en de norm En 374, die daarvan is afgeleid.
beschermbril
Bij stof- of aërosolvorming een respirator gebruiken met een goedgekeurd filter binnen de mogelijkheden van de respirator / filter combinatie. Op plekken waar de concentratie boven de aanbevolen grenzen ligt of als deze onbekend zijn, of een respirator van een type cartridge is niet voldoende. Draag een masker met overdruk en luchttoevoer. Adembescherming volgens EN 136. Adembescherming volgens EN 140. Adembescherming volgens EN 14387.
Werkkleding of laboratoriumjas.
Bodem : Het product mag niet wegvloeien in riool, waterstroom of bodem. Water : Als het product rivieren, meren of riolen vervuilt de respectievelijke autoriteiten op de hoogte stellen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stabiel onder normale omstandigheden.
Onder normale gebruiksomstandigheden zijn geen gevaarlijke reacties waargenomen.
Stof kan een explosief mengsel vormen in lucht.
Beschermen tegen vorst, hitte en zonlicht.
Oxidanten
Koolmonoxide Kooldioxide (CO2)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Blanose™ REF CMC 7MX ZS Sodium Carboxymethylcellulose?
The signal word is no signal word.
What is the physical form of Blanose™ REF CMC 7MX ZS Sodium Carboxymethylcellulose?
Blanose™ REF CMC 7MX ZS Sodium Carboxymethylcellulose is a poeder with wit color. It has licht odor.
What is Blanose™ REF CMC 7MX ZS Sodium Carboxymethylcellulose used for?
Reologiehulpstof
What is the melting point of Blanose™ REF CMC 7MX ZS Sodium Carboxymethylcellulose?
The melting point is Niet uitgevoerd and the boiling point is Niet uitgevoerd.