NextSDS Logo
Safety Data Sheet NL

Trichloroethylene

CAS 79-01-6

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Trichloroethylene
Product Code
PHR1562

Regulatory Identifiers

CAS Number
79-01-6 Check regulations →
REACH No.
Een registratienummer is niet beschikbaar voor deze stof omdat de stof of het gebruik is uitgezonderd voor registratie, voor het jaarlijks volume geen registratie vereist is of de registratie is voorzien met een latere registratie deadline.

Identified Uses

Wetenschappelijk onderzoek en ontwikkeling

Manufacturers & Suppliers

S

Sigma-Aldrich

M

Merck Life Science BV/SRL

distributor

Brusselsesteenweg 288, B-3090 OVERIJSE

+32 (0)3 899-1301

Emergency Contacts

CHEMTREC

+(32) 28 083237

Anti-poison centre

070 245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
Skin Sens. Cat. 1B H317
Muta. Cat. 2 H341
Carc. Cat. 1B H350
STOT SE Cat. 3 H336
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H315 Veroorzaakt huidirritatie.
H317 Kan een allergische huidreactie veroorzaken.
H319 Veroorzaakt ernstige oogirritatie.
H336 Kan slaperigheid of duizeligheid veroorzaken.
H341 Verdacht van het veroorzaken van genetische schade.
H350 Kan kanker veroorzaken.
H412 Schadelijk voor in het water levende organismen, met langdurige gevolgen.

Precautionary Statements

P202 Pas gebruiken nadat u alle veiligheidsvoorschriften gelezen en begrepen heeft.
P273 Voorkom lozing in het milieu.
P280 Draag beschermende handschoenen/ beschermende kleding/ oogbescherming/ gelaatsbescherming.
P302 + P352 BIJ CONTACT MET DE HUID: met veel water wassen.
P305 + P351 + P338 BIJ CONTACT MET DE OGEN: voorzichtig afspoelen met water gedurende een aantal minuten; contactlenzen verwijderen, indien mogelijk; blijven spoelen.
P308 + P313 NA (mogelijke) blootstelling: een arts raadplegen.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Trichloroethylene EC: 201-167-4 79-01-6 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Na inademen: frisse lucht. Arts waarschuwen.

Skin contact

Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Een arts raadplegen.

Eye contact

Na oog contact: uitspoelen met ruim voldoende water. Oogarts raadplegen. Contactlenzen uitnemen.

Ingestion

Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Gebruik blusmiddelen die geschikt zijn voor de plaatselijke omstandigheden en de omgeving.

Unsuitable media

Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.

Specific hazards

Koolstofoxiden, Chloorwaterstofgas. Niet brandbaar. Door brand in de omgeving is het ontstaan van gevaarlijke dampen mogelijk.

Instructions

Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.

Firefighter Protection

Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Dampen, aerosol niet inademen. Vermijd contact met de stof. Zorg voor voldoende ventilatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.

Environmental

Product niet in de riolering laten komen.

Cleanup methods

Voorzichtig opnemen met vloeistofabsorberend materiaal (b.v. Chemizorb®). Vervuild oppervlak schoonmaken.

Materials: vloeistofabsorberend materiaal (b.v. Chemizorb®)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Stof/mengsel niet inademen. Voor voorzorgsmaatregelen zie hoofdstuk 2.2

Storage

Goed afgesloten. Op een goed geventileerde plaats bewaren. Achter slot bewaren of in een ruimte die alleen toegankelijk is voor vakbekwame of geautoriseerde personen. Bij kamertemperatuur bewaren

Hygiene

Verontreinigde kleding meteen vervangen. Gebruik huidbeschermende crème. Na het werken met de stof handen en gezicht wassen.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Volledig contact: Materiaal: Viton®, Minimale laagdikte: 0,7 mm, Doorbraaktijd: 480 min, Getest materiaal: Vitoject® (KCL 890 / Aldrich Z677698, Maat M). Spad contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,4 mm, Doorbraaktijd: 10 min, Getest materiaal: Camatril® (KCL 730 / Aldrich Z677442, Maat M). Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN 16523-1 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Eyes

Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU). beschermbril

Respiratory

Aanbevolen filtertype: Filter A (volgens DIN 3181) voor dampen van organische verbindingen. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.

Skin/Body

beschermende kleding

Environmental

Product niet in de riolering laten komen.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Water
1,1 g/l bij 20 °C
Relative Evaporation Rate
---
State Under Standard Conditions
---
Physical State Data
liquid
Colour Intensity
---
Evaporation Rate
---
Kinematic Viscosity
---
Lower Explosive Limit
7,9 % (V)
Softening Point
---
Freezing Point
---
Colour
kleurloos
Odor Threshold
---
Molecular Weight
---
Boiling Point
86,7 °C bij 1.013 hPa
Solidification Point
---
Flash Point
- gesloten bekerniet ontvlambaar
Odor
kenmerkend
Solubility
---
Partition Coefficient
log Pow: 2,53 bij 20 °C - Een bio-accumulatie is niet te verwachten.
Crystallisation Point
---
Ph
---
Density
1,46 g cm³ bij 20 °C
Voc Content
---
Metal Corrosion
---
Relative Density
1,46 bij 20 °C
Properties Status
---
Vapor Pressure
81,3 hPa bij 20,0 °C
Flammability
---
Upper Explosive Limit
> 99 % (V) - (Verzadiging - bij hoog volume aandeel, gaat de explosie over in een ontledingsreactie)
Solubility In Fat
---
Bulk Density
---
Physical State
vloeibaar, helder
Dynamic Viscosity
0,58 mPa.s bij 20 °C
Cloud Point
---
Form
---
Decomposition Temperature
---
Explosive Limits
---
Auto Ignition Temperature
410,0 °C
Vapor Density
---
Appearance
---
Melting Point
Smeltpunt: -84,8 °C bij 1.013 hPa
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (ka mertemperatuur).

Reactivity

Geen gegevens beschikbaar

Hazardous reactions

Heftige reacties mogelijk met: Zuurstof (als vloeibaar gas), Aardalkalimetalen, alkalimide, halfmetaal waterstofverbindingen, perchloorzuur, Lichte metalen, Aluminiumchloride, Sterke oxidatiemiddelen, Kaliumnitraat. Gevaar voor ontploffing met: Alkalimetalen, Aluminium, Barium, alkalihydroxiden, Lithium, magnesium, Metaalpoeders, Natriumamide, Sterke oxidatiemiddelen, stikstofdioxide, Boraa, Zuurstof, met, alkalihydroxiden, Zuurstof, met, Druk. Kans op ontbranding of vorming van brandbare gassen of dampen met: Titaan, Beryllium, Epoxybestanddelen.

Avoid

geen informatie beschikbaar

Incompatible

Geen gegevens beschikbaar

Decomposition

In geval van brand: zie hoofdstuk 5

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1710
Shipping Name
TRICHLOORETHYLEEN
Transport Class
6.1
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Trichloroethylene?

The signal word is danger.

What is the physical form of Trichloroethylene?

Trichloroethylene is a vloeibaar, helder with kleurloos color. It has kenmerkend odor.

What is Trichloroethylene used for?

Wetenschappelijk onderzoek en ontwikkeling

What are the hazard statements for Trichloroethylene?

This substance has 7 hazard statements:

  • H315: Veroorzaakt huidirritatie.
  • H317: Kan een allergische huidreactie veroorzaken.
  • H319: Veroorzaakt ernstige oogirritatie.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.
  • H341: Verdacht van het veroorzaken van genetische schade.
  • H350: Kan kanker veroorzaken.
  • H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.

What is the melting point of Trichloroethylene?

The melting point is Smeltpunt: -84,8 °C bij 1.013 hPa and the boiling point is 86,7 °C bij 1.013 hPa.