Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 1,1,1,3,3,3-|Hexamethyl|disilazaan voor synthese
- Product Code
- 8.04324
- Chemical Name
- 1,1,1,3,3,3-Hexamethyldisilazane
Regulatory Identifiers
- CAS Number
- 999-97-3 Check regulations →
- REACH No.
- Een registratienummer is niet beschikbaar voor deze stof omdat de stof of het gebruik is uitgezonderd voor registratie of voor het jaarlijks volume geen registratie vereist is.
Identified Uses
Synthese chemicalie
Manufacturers & Suppliers
Millipore
manufacturer
Merck Life Science BV/SRL
national supplier
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,1,1,3,3,3-Hexamethyldisilazaan EC: 213-668-5 | 999-97-3 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inhalatie: frisse lucht. Bij ademstilstand: mond-op-mond-beademing of mechanische beademing. Indien nodig zuurstofmasker. Direct arts waarschuwen.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Onmiddellijk een arts waarschuwen.
Na oog contact: uitspoelen met ruim voldoende water. Contactlenzen uitnemen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Immediate Medical Attention
Direct arts waarschuwen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Kooldioxide (CO2) Droogpoeder
Schuim Water
Brandbaar. Dampen zijn zwaarder dan lucht en verspreiden zich mogelijk over de vloer. In geval van brand kunnen er gevaarlijke brandgassen en dampen ontstaan. Vormt ontplofbare mengsels met lucht bij omgevingstemperaturen. Opletten voor vuurterugslag. Opgepast! Bij contact met water ontstaat: Ammoniak, formaldehyde dampen.
Houd een veilige afstand.
Firefighter Protection
Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Dampen, aerosol niet inademen. Vermijd contact met de stof. Zorg voor voldoende ventilatie. Verwijderd houden van warmte en ontstekingsbronnen. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.
Voorzichtig opnemen met vloeistofabsorberend materiaal (b.v. Chemizorb®). Vervuild oppervlak schoonmaken.
Materials: vloeistofabsorberend materiaal (b.v. Chemizorb®)
Related Products
Similar products with comparable safety profiles
Methylcyclohexaan voor synthese
CAS: 108-87-2
1-Fenyldodecaan voor synthese
CAS: 123-01-3
n-Hexadecaan synthese kwaliteit
CAS: 544-76-3
n-Hexadecaan synthese kwaliteit
---
Tetra-n-butylammoniumfluoridetrihydraat voor synthese
---
Difenyl|methaan-4,4'-di|isocyanaat (mengsel van di- en triisocyanaten) voor synthese
CAS: 101-68-8
Methylcyclo|pentaan voor synthese
CAS: 96-37-7
Trans-Hexen-2-al ≥98,5 %, voor synthese
CAS: 6728-26-3
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Werken onder afzuiging. Stof/mengsel niet inademen. Ontwikkeling van dampen/aerosolen vermijden.
Container goed afgesloten bewaren op een droge en goed geventileerde plaats. Verwijderd houden van warmte en ontstekingsbronnen. Achter slot bewaren of in een ruimte die alleen toegankelijk is voor vakbekwame of geautoriseerde personen.
Verontreinigde kleding meteen vervangen. Gebruik huidbeschermende crème. Na het werken met de stof handen en gezicht wassen.
Verwijderd houden van open vuur, hete oppervlakken en ontstekingsbronnen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Volledig contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,4 mm, Doorbraaktijd: 480 min, Getest materiaal: Camatril® (KCL 730 / Aldrich Z677442, Maat M). Spat contact: Materiaal: Chloropreen, Minimale laagdikte: 0,65 mm, Doorbraaktijd: 240 min, Getest materiaal: KCL 720 Camapren®
Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU). beschermbril
Aanbevolen filtertype: Filter type K. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
Vlamvertragende, antistatische beschermingskleding.
Product niet in de riolering laten komen. Risico op explosie.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (kamertemperatuur).
Dampen kunnen explosief mengsel vormen met lucht.
Gevaar voor ontploffing met: Salpeterzuur, Oxidanten. Kan agressief ontleden in contact met: Aminen, Mercaptanen. Exotherme reactie met: Alcoholen, nitraten, sterk reducerende middelen, hydriden, alkalien, zuren, Water.
Verwarmend.
Geen gegevens beschikbaar
Ammoniak, formaldehyde
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3286
- Shipping Name
- BRANDBARE VLOEISTOF, GIFTIG, BIJTEND, N.E.G. (1,1,1,3,3,3-Hexamethyldisilazaan)
- Transport Class
- 3 (6.1, 8)
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 1,1,1,3,3,3-|Hexamethyl|disilazaan voor synthese?
The signal word is danger.
What is the physical form of 1,1,1,3,3,3-|Hexamethyl|disilazaan voor synthese?
1,1,1,3,3,3-|Hexamethyl|disilazaan voor synthese is a vloeibaar with kleurloos color. It has geen gegevens beschikbaar odor.
What is 1,1,1,3,3,3-|Hexamethyl|disilazaan voor synthese used for?
Synthese chemicalie
What are the hazard statements for 1,1,1,3,3,3-|Hexamethyl|disilazaan voor synthese?
This substance has 4 hazard statements:
- H225: Licht ontvlambare vloeistof en damp.
- H302 + H332: Schadelijk bij inslikken en bij inademing.
- H311: Giftig bij contact met de huid.
- H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of 1,1,1,3,3,3-|Hexamethyl|disilazaan voor synthese?
The melting point is -76,2 °C bij 1.013 hPa and the boiling point is 125 °C bij 1.013 hPa.