Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Tantaal ICP-standaardoplossing
- Product Code
- 2471
- Chemical Name
- Tantaal
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- niet relevant (mengsel)
Identified Uses
laboratoriumchemicaliën
Manufacturers & Suppliers
Carl Roth GmbH + Co KG
manufacturer
Schoemperlenstr. 3-5, D-76185 Karlsruhe, Duitsland
+49 (0) 721 - 56 06 0
http://www.carlroth.de
Emergency Contacts
Poison Centre Munich
+49/(0)89 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Voor frisse lucht zorgen. Bij ademhalingsmoeilijkheden het slachtoffer in de frisse lucht brengen en laten rusten in een houding die het ademen vergemakkelijkt. Bij onregelmatige ademhaling of ademstilstand direct een arts raadplegen en eerste hulp toedienen.
Huid met water afspoelen/afdouchen. Na aanraking met de huid onmiddellijk wassen met veel water. Inwrijven met een gel die calciumgluconaat bevat.
Symptoms: brandwonden, huidirritatie
Minstens 10 minuten met schoon, vloeiend water spoelen terwijl de oogleden worden opengehouden.
Symptoms: oogirritatie
Grondig spoelen met een calciumgluconaatoplossing.
Immediate Medical Attention
Medische behandeling noodzakelijk bij inademing. Behandeling door een arts is direct noodzakelijk bij huidcontact. Bij oogirritatie een oogarts consulteren. In geval van huidirritatie arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
waterstraal, schuim, droog bluspoeder, kooldioxide (CO2)
volle waterstraal
Niet brandbaar.
Met normale voorzorgen vanaf een redelijke afstand blussen.
Firefighter Protection
Draag onafhankelijke ademhalingsapparatuur. Chemisch beschermingspak dragen.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Het dragen van passende beschermingsmiddelen (met inbegrip van de persoonlijke beschermingsmiddelen in rubriek 8 van het veiligheidsinformatieblad) om besmetting van de huid, de ogen en de eigen kleding te voorkomen. Contact met huid, ogen en kleding vermijden. Damp/spuitnevel niet inademen.
Vermijden dat het product in afvoerkanalen, oppervlaktewater of grondwater terechtkomt.
Met vloeistofbindende stoffen (zand, zuurbinder, universeel binder) opnemen. In geschikte behouders voor verwijdering brengen.
Materials: zand, zuurbinder, universeel binder
Related Products
Similar products with comparable safety profiles
Barium standaard oplossing
---
ICP multi-elementenstandaard oplossing IV Certipur®
UFI: 4350-X60Y-999H-VTSY
Calciumstandaardoplossing, 10.000 mg/l Ca in verd. salpeterzuur (van CaCO₃) ARISTAR® standaard voor ICP
---
ICP-standaardoplossing met meerdere elementen IX (9 elementen in verdund salpeterzuur) 100 mg/l: As, Be, Cd, Cr(VI), Hg, Ni, Pb, Se, Tl Certipur®
---
Kwik standaard oplossing
---
Kwik ICP standaard herleidbaar naar SRM van NIST Hg(NO₃)₂ in HNO₃ 10% 10000 mg/l Hg Certipur®
---
TISAB IV-Oplossing
---
Iron Standard for ICP
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Roer bij verdunnen/oplossen het product altijd voorzichtig door het water en niet omgekeerd. Verpakking voorzichtig behandelen en openen.
Op een goed geventileerde plaats bewaren. In goed gesloten verpakking bewaren. Achter slot bewaren.
Grondige reiniging van de huid direct na het hanteren met het product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Draag geschikte handschoenen. Geschikt zijn volgens EN 374 beproefde handschoenen tegen chemicaliën. Voor gebruik lekdichtheid/ondoordringbaarheid bepalen. Er wordt aangeraden om in geval van speciale applicaties de chemische bestendigheid van de boven genoemde veiligheidshandschoenen samen met de leverancier van de handschoenen na te gaan. Soort materiaal: Butylrubber. Materiaaldikte: 0,7mm. Doorbraaktijd van het handschoenmateriaal: >480 minuten (permeatieniveau: 6).
Veiligheidsbril met zijbescherming dragen.
Adembescherming is noodzakelijk bij: Aërosol- of nevelvorming. Type: NO-P3 (tegen nitreuze gassen en partikels, kleurcode: blauw/wit).
Vermijden dat het product in afvoerkanalen, oppervlaktewater of grondwater terechtkomt.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het materiaal is stabiel onder normale atmosferische omstandigheden en verwachte temperatuur en druk bij opslag en hantering.
voor metalen bijtend(e) stof of mengsel.
Heftige reactie met: Alkalihydroxide (bijtende alkali), Alkalimetalen, Fluor, Metalen, Fosfooroxyde, Sterke loog
Verwijderd houden van warmte.
verschillende metalen
Gevaarlijke verbrandingsproducten: zie rubriek 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2922
- Shipping Name
- BIJTENDE VLOEISTOF, GIFTIG, N.E.G.
- Transport Class
- 8
- Packing Group
- III
Aan de bepalingen voor gevaarlijke goederen (ADR) moet ook in het bedrijf worden voldaan.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Tantaal ICP-standaardoplossing?
The signal word is danger.
What is the physical form of Tantaal ICP-standaardoplossing?
Tantaal ICP-standaardoplossing is a vloeibaar (vloeistof) with kleurloos color. It has scherp odor.
What is Tantaal ICP-standaardoplossing used for?
laboratoriumchemicaliën
What are the hazard statements for Tantaal ICP-standaardoplossing?
This substance has 5 hazard statements:
- H290: Kan bijtend zijn voor metalen.
- H302: Schadelijk bij inslikken.
- H311: Giftig bij contact met de huid.
- H315: Veroorzaakt huidirritatie.
- H319: Veroorzaakt ernstige oogirritatie.
What is the melting point of Tantaal ICP-standaardoplossing?
The melting point is niet bepaald and the boiling point is Deze informatie is niet beschikbaar..