Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Di-ammoniumoxalaat-monohydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
- Product Code
- 1.01192
Regulatory Identifiers
- CAS Number
- 6009-70-7 Check regulations →
- REACH No.
- 01-2120757936-37-XXXX
Identified Uses
Reagens voor analyse, Chemische productie
Manufacturers & Suppliers
Millipore
manufacturer
Merck Life Science BV/SRL
national supplier
Brusselsesteenweg 288, B-3090 OVERIJSE
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Oxalic acid, ammonium salt monohydrate EC: 611-933-3 | 6009-70-7 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Na inhalatie: frisse lucht.
Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen. Een arts raadplegen.
Na oog contact: uitspoelen met ruim voldoende water. Contactlenzen uitnemen. Oogarts raadplegen.
Na inslikken: slachtoffer onmiddellijk water laten drinken (niet meer dan twee glazen). Een arts raadplegen.
Immediate Medical Attention
Een arts raadplegen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Schuim, Kooldioxide (CO2), Droogpoeder
Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.
Koolstofoxiden, Stikstofoxiden (NOx), Brandbaar. In geval van brand kunnen er gevaarlijke brandgassen en dampen ontstaan.
Houd een veilige afstand.
Firefighter Protection
Blijf niet in de gevarenzone zonder beademingsapparatuur die onafhankelijk is van de omgevingslucht. Om huidcontact te vermijden, houd een veilige afstand en draag geschikte beschermende kleding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Vermijd stofinhalatie. Vermijd contact met de stof. Zorg voor voldoende ventilatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.
Product niet in de riolering laten komen.
Droog opnemen. Vervuild oppervlak schoonmaken.
Related Products
Similar products with comparable safety profiles
Di-ammoniumoxalaat-monohydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 6009-70-7
Di-ammoniumwaterstoffosfaat voor analyse EMSURE® ACS, Reag. Ph Eur
CAS: 7783-28-0
Ammoniumacetaat voor analyse EMSURE® ACS, Reag. Ph Eur
CAS: 631-61-8
Ammoniumacetaat voor analyse EMSURE® ACS, Reag. Ph Eur
---
Ammoniumacetaat voor analyse EMSURE® ACS, Reag. Ph Eur
---
Ammoniumperoxodisulfaat voor analyse EMSURE® ACS,Reag. Ph Eur
CAS: 7727-54-0
Ammoniumsulfaat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7783-20-2
Ammoniumsulfaat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 7783-20-2
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Stof/mengsel niet inademen. Verontreinigde kleding meteen vervangen. Gebruik huidbeschermende crème. Na het werken met de stof handen en gezicht wassen.
Goed afgesloten. Droog.
Verontreinigde kleding meteen vervangen. Gebruik huidbeschermende crème. Na het werken met de stof handen en gezicht wassen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Materiaal: Nitrilrubber; Minimale laagdikte: 0,11 mm; Doorbraaktijd: 480 min; Getest materiaal: KCL 741 Dermatril® L (voor zowel volledig contact als spatcontact).
Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU). beschermbril
nodig indien stofvorming plaatsvindt. Onze aanbevelingen voor het filteren van de ademhalingsbescherming zijn gebaseerd op de volgende normen: DIN EN 143, DIN 14387 en andere geldende normen m.b.t. het gebruikte ademhalingsbeschermingssysteem. Aanbevolen filtertype: Filter type P2. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.
beschermende kleding
Product niet in de riolering laten komen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (kamertemperatuur).
Voor brandbare, organische stoffen en mengsels geldt in het algemeen: bij opwaaiend stof in een overeenkomstig fijne verdeling moet in het algemeen worden uitgegaan van het risico van een stofexplosie.
Gevaar voor ontploffing met: natriumhypochloriet. Heftige reacties mogelijk met: Oxidanten, Sterke zuren
geen informatie beschikbaar
natriumhypochloriet, Oxidanten, Sterke zuren
In geval van brand: zie hoofdstuk 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Di-ammoniumoxalaat-monohydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
The signal word is warning.
What is the physical form of Di-ammoniumoxalaat-monohydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
Di-ammoniumoxalaat-monohydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur is a vast with wit color. It has reukloos odor.
What is Di-ammoniumoxalaat-monohydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur used for?
Reagens voor analyse, Chemische productie
What are the hazard statements for Di-ammoniumoxalaat-monohydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
This substance has 2 hazard statements:
- H302: Schadelijk bij inslikken.
- H319: Veroorzaakt ernstige oogirritatie.
What is the melting point of Di-ammoniumoxalaat-monohydraat voor analyse EMSURE® ACS,ISO,Reag. Ph Eur?
The melting point is Smeltpunt/-traject: 133 °C and the boiling point is (ontleding).