Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOTIP BLANKE LAK 500 ML
- Product Code
- 04009
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU21 Consumentengebruik: Particuliere huishoudens / algemeen publiek / consumenten; SU22 Professioneel gebruik: Publiek domein (administratie, onderwijs, amusement, dienstverlening, ambachtslieden); Productcategorie PC9a Coatings en verven, verdunners, verfafbijtmiddelen; Procescategorie: PROC7 Spuiten in een industriële omgeving; PROC11 Spuiten buiten industriële omgevingen; Toepassing van de stof / van de bereiding Verf
Manufacturers & Suppliers
European Aerosols B.V.
manufacturer
Wolfraamweg 2, NL-8471 XC Wolvega, The Netherlands
+31 (0)561 694400
Emergency Contacts
Emergency Contact
+31 (0)561-694400
tijdens kantooruren
NVIC
+31 (0)88 755 8000
24 uur per dag
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dimethylether EC: 204-065-8 | 115-10-6 | 50 - 75% | Yes |
| Koolwaterstoffen, C9, aromaten EC: 918-668-5 | --- | 10 - 12.5% | Yes |
| Koolwaterstoffen, C6-C7, n-alkanen, isoalkanen, cyclische, <5% hexaan EC: 921-024-6 | --- | 5 - 10% | Yes |
| xyleen EC: 905-588-0 | --- | 5 - 10% | Yes |
| butaan-1-ol EC: 200-751-6 | 71-36-3 | 5 - 10% | Yes |
| ethylbenzeen EC: 202-849-4 | 100-41-4 | 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Bij bewusteloosheid ligging en vervoer in stabiele zijligging.
Onmiddellijk met water en zeep afwassen en goed naspoelen.
De ogen gedurende verscheidene minuten onder stromend water afspoelen terwijl de oogspleet geopend blijft. Bij aanhoudende klachten een dokter raadplegen. Ogen met open ooglid een aantal minuten onder stromend water afspoelen en dokter raadplegen.
Drink zeer veel water en voer verse lucht aan. Onmiddellijk een dokter waarschuwen.
Immediate Medical Attention
Onmiddellijk een dokter waarschuwen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Brandblusmaatregelen op omgeving afstemmen.
Bij verhitting of brand ontstaan vergiftige gassen.
Firefighter Protection
Ademhalingstoestel aantrekken.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Niet beschermd personen op afstand houden.
Niet in de riolering/het oppervlaktewater/het grondwater laten terechtkomen.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Niet spuiten in de richting van een vlam of een gloeiend voorwerp. Onststekingsbronnen op afstand houden - niet roken. Ademhalingstoestellen gereedhouden.
Tanks ondoordringbaar gesloten houden.
Niet spuiten in de richting van een vlam of een gloeiend voorwerp. Onststekingsbronnen op afstand houden - niet roken.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geen aanvullende gegevens. Zie 7.
Veiligheidshandschoenen. Handschoenmateriaal: Butylrubber. De keuze van een geschikte handschoen is niet alleen afhankelijk van het materiaal, maar ook van andere kwaliteitskenmerken en verschilt van fabrikant tot fabrikant. Doordringingstijd: Butylrubber handschoenen met een dikte van 0.4 mm zijn bestand tegen: Aceton: 480 min, Butylacetaat: 60 min, Ethyl acetate: 170 min, Xylene: 42 min. Butylrubberen handschoenen met een dikte van 0,4 mm zijn gedurende 42-480 minuten oplosmiddelbestendig. Veiligheidshalve adviseren wij de gebruikers en personen die verantwoordelijk zijn voor de veiligheid op het werk uit te gaan van een oplosmiddelbestendigheid van 42 minuten. Gelet op de gegevens in paragraaf 3 van dit VIB kan men in bepaalde gevallen uitgaan van een langere weerstandsduur.
Nauw aansluitende veiligheidsbril
Bij korte of geringe belasting ademfiltertoestel; bij intensieve resp. langdurige expositie een van de omringende lucht onafhankelijk ademhalingstoestel gebruiken. Filter A2/P3
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Geen afbraak bij gebruik volgens voorschrift.
Geen verdere relevante informatie verkrijgbaar.
Geen gevaarlijke reacties bekend.
Geen afbraak bij gebruik volgens voorschrift.
Geen verdere relevante informatie verkrijgbaar.
Geen gevaarlijke ontbindingsproducten bekend.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- SPUITBUSSEN / AEROSOLS
- Transport Class
- 2.1
Waarschuwing: Gassen
SW1 Protected from sources of heat. SW22 For AEROSOLS with a maximum capacity of 1 litre: Category A. For AEROSOLS with a capacity above 1 litre: Category B. For WASTE AEROSOLS: Category C, Clear of living quarters. SG69 For AEROSOLS with a maximum capacity of 1 litre: Segregation as for class 9. Stow 'separated from' class 1 except for division 1.4. For AEROSOLS with a capacity above 1 litre: Segregation as for the appropriate subdivision of class 2. For WASTE AEROSOLS: Segregation as for the appropriate subdivision of class 2.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOTIP BLANKE LAK 500 ML?
The signal word is danger.
What is the physical form of MOTIP BLANKE LAK 500 ML?
MOTIP BLANKE LAK 500 ML is a aërosol with kleurloos color. It has oplosmiddelachtig odor.
What is the solubility of MOTIP BLANKE LAK 500 ML?
Niet resp. gering mengbaar.
What is MOTIP BLANKE LAK 500 ML used for?
SU21 Consumentengebruik: Particuliere huishoudens / algemeen publiek / consumenten; SU22 Professioneel gebruik: Publiek domein (administratie, onderwijs, amusement, dienstverlening, ambachtslieden); Productcategorie PC9a Coatings en verven, verdunners, verfafbijtmiddelen; Procescategorie: PROC7 Spuiten in een industriële omgeving; PROC11 Spuiten buiten industriële omgevingen; Toepassing van de stof / van de bereiding Verf
What are the hazard statements for MOTIP BLANKE LAK 500 ML?
This substance has 5 hazard statements:
- H222: Zeer licht ontvlambare aerosol. Houder onder druk: kan openbarsten bij verhitting.
- H315: Veroorzaakt huidirritatie.
- H318: Veroorzaakt ernstig oogletsel.
- H335: Kan irritatie van de luchtwegen veroorzaken. Kan slaperigheid of duizeligheid veroorzaken.
- H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.
What is the melting point of MOTIP BLANKE LAK 500 ML?
The melting point is Niet bepaald. and the boiling point is Vanwege aerosol niet bruikbaar..