NextSDS Logo
Safety Data Sheet NL

MOTIP SILICONE SPRAY 400 ML

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
MOTIP SILICONE SPRAY 400 ML
Product Code
000562

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Preparaat

Uses advised against

Geen verdere relevante informatie verkrijgbaar.

Manufacturers & Suppliers

M

MOTIP DUPLI B.V.

manufacturer

Wolframweg 2, NL-8471 XC Wolvega, Nederland

+31 (0)561 694400

Emergency Contacts

Emergency Contact

+31 629058130

24 h/d, 7 d/wk

NVIC

030-2748888

24 uur per dag

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aquatic Chronic Cat. 2 H411
Skin Irrit. Cat. 2 H315
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H222 Zeer licht ontvlambare aerosol. Houder onder druk: kan open barsten bij verhitting.
H315 Veroorzaakt huidirritatie.
H336 Kan slaperigheid of duizeligheid veroorzaken.
H411 Giftig voor in het water levende organismen, met langdurige gevolgen.

Precautionary Statements

P101 Bij het inwinnen van medisch advies, de verpakking of het etiket ter beschikking houden.
P102 Buiten het bereik van kinderen houden.
P103 Alvorens te gebruiken, het etiket lezen.
P210 Verwijderd houden van warmte, hete oppervlakken, vonken, open vuur en andere ontstekingsbronnen. Niet roken.
P211 Niet in een open vuur of op andere ontstekingsbronnen spuiten.
P251 Ook na gebruik niet doorboren of verbranden.
P260 Spuitnevel niet inademen.
P410 + P412 Tegen zonlicht beschermen. Niet blootstellen aan temperaturen boven 50 °C.
P501 De inhoud en de verpakking verwerken volgens de plaatselijke voorschriften.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
nafta (aardolie), met waterstof behandeld licht (< 0,1 % benzol CAS nr. 71-43-2) EC: 921-024-6 64742-49-0 25 - 50% Yes
propaan EC: 200-827-9 74-98-6 20 - 25% Yes
butaan EC: 203-448-7 106-97-8 12.5 - 20% Yes
isobutane (contains < 0,1 % butadiene (203-450-8)) EC: 200-857-2 75-28-5 12.5 - 20% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Bij bewusteloosheid rigging en vervoer in stabiele zijligging.

Skin contact

Onmiddelijk met water en zeep afwassen en goed naspoelen.

Eye contact

De ogen gedurende verscheidene minuten onder stromend water afspoelen terwijl de oogspleet geopend blijft.

Ingestion

Drink zeer veel water en voer verse lucht aan.

Immediate Medical Attention

Bij aanhoudende klachten een dokter raadplegen (oogcontact). Onmiddelijk een dokter waarschuwen (inslikken).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, bluspoeder of waterstraal. Grotere brand met waterstraal bestrijden of met schuim, dat gegen alcohol bestand is.

Unsuitable media

Krachtige waterstraal

Specific hazards

Geen verdere relevante informatatie verkrijgbaar.

Firefighter Protection

Geen bijzondere maatregelen nodig.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Mag niet in riolering of afvalwater terechtkomen. Niet in de riolering/het oppervlaktewater/het grondwater laten terechtkomen.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Niet spuiten in de richting van een vlam of een gloeiend voorwerp. Ontstekingsbronnen op afstand houden - niet roken. Houder onder druk. Beschermen tegen de zon en niet blootstellen aan een hogere temperatuur dan 50 °C, bijv. door gloeilampen. Ook na gebruik niet doorboren of verbranden.

Storage

Beschermen tegen de zon en niet blootstellen aan een hogere temperatuur dan 50 °C.

Fire prevention

Ontstekingsbronnen op afstand houden - niet roken.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Het handschoenmateriaal moet ondoorlatend en bestand zijn tegen het product / de stof / de bereiding. Op grond van falende testen kan geen aanbeveling voor handschoenmateriaal voor het product / de bereiding / het chemicaliënmengsel afgegeven worden. Kies handschoenmateriaal rekening houdend met de penetratietijden, de permeatiegraden en de degradatie. Veiligheidshandschoenen. De keuze van een geschikte handschoen is niet alleen afhankelijk van het materiaal, maar ook van andere kwaliteitskenmerken en verschilt van fabrikant tot fabrikant. Aangezien het product uit meerdere stoffen is samengesteld, is de duurzaamheid van de handschoenmaterialen niet vooraf berekenbaar en moet derhalve vóór het gebruik worden getest. De precieze penetratietijd kunt u te weten komen bij de handschoenfabrikant; houd er rekening mee.

Eyes

Niet noodzakelijk.

Respiratory

Niet noodzakelijk.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Density
0,6353 g/cm³ (bij 20 °C)
Metal Corrosion
---
Flash Point
< 0 °C
Crystallisation Point
---
Softening Point
---
Decomposition Temperature
Niet bepaald.
Upper Explosive Limit
10,9 Vol %
Ph
Niet bepaald.
Boiling Point
Vanwege aerosol niet bruikbaar.
Freezing Point
---
Cloud Point
---
Solubility In Water
Niet resp. gering mengbaar.
Physical State Data
aerosol
Relative Density
Niet bepaald.
Solubility
---
Properties Status
---
Appearance
---
Vapor Density
Niet bepaald.
Lower Explosive Limit
0,9 Vol %
Vapor Pressure
3500 hPa (bij 20 °C)
Melting Point
Niet bepaald.
Molecular Weight
---
Auto Ignition Temperature
230 °C
Form
Aërosol
Kinematic Viscosity
Niet bepaald.
Physical State
Aërosol
Colour Intensity
---
State Under Standard Conditions
---
Odor Threshold
Niet bepaald.
Odor
Karakteristiek
Flammability
---
Solidification Point
---
Bulk Density
---
Voc Content
584,5 g/l
Partition Coefficient
Niet bepaald.
Explosive Limits
---
Relative Evaporation Rate
---
Colour
Volgens de produktbeschrijving
Solubility In Fat
---
Dynamic Viscosity
Niet bepaald.
Evaporation Rate
Niet bruikbaar.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Geen afbraak bij gebruik volgens voorschrift.

Hazardous reactions

Geen gevaarlijke reacties bekend.

Avoid

Geen verdere relevante informatie verkrijgbaar.

Incompatible

Geen verdere relevante informatie verkrijgbaar.

Decomposition

Geen gevaarlijke ontbindingsprodukten bekend.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
SPUITBUSSEN
Transport Class
2
ADR

Waarschuwing: Gassen

IMDG

Waarschuwing: Gassen

IATA

Waarschuwing: Gassen

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for MOTIP SILICONE SPRAY 400 ML?

The signal word is danger.

What is the physical form of MOTIP SILICONE SPRAY 400 ML?

MOTIP SILICONE SPRAY 400 ML is a aërosol with volgens de produktbeschrijving color. It has karakteristiek odor.

What is MOTIP SILICONE SPRAY 400 ML used for?

Preparaat

What are the hazard statements for MOTIP SILICONE SPRAY 400 ML?

This substance has 4 hazard statements:

  • H222: Zeer licht ontvlambare aerosol. Houder onder druk: kan open barsten bij verhitting.
  • H315: Veroorzaakt huidirritatie.
  • H336: Kan slaperigheid of duizeligheid veroorzaken.
  • H411: Giftig voor in het water levende organismen, met langdurige gevolgen.

What is the melting point of MOTIP SILICONE SPRAY 400 ML?

The melting point is Niet bepaald. and the boiling point is Vanwege aerosol niet bruikbaar..