Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 5-(Hydroxymethyl)-2-furaldehyde (containing 3-5% H2O as a stabilizer)
- Product Code
- F065253
Regulatory Identifiers
- CAS Number
- 67-47-0 Check regulations →
- EC Number
- 200-654-9 Check regulations →
Identified Uses
Voor onderzoeks- en ontwikkelingsdoeleinden.
Uses advised against
Geen gebruik geadviseerd.
Manufacturers & Suppliers
Fluorochem EU Limited
distributor
First Floor, Penrose 2, Penrose dock Cork T23 YY09 Ireland
+353 21 212 7304
Emergency Contacts
De gifinformatie
030-2748888
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 5-(Hydroxymethyl)-2-furaldehyde (containing 3-5% H2O as a stabilizer) EC: 200-654-9 | 67-47-0 | --- | Yes |
Voor de volledige tekst van de H-verklaringen die in deze sectie worden genoemd, zie Sectie 16.
Notes
Niet van toepassing. Het product is een stof.
First Aid Measures
Emergency procedures for chemical exposure incidents
Breng de persoon naar de frisse lucht en houd hem comfortabel om te ademen. Als de ademhaling onregelmatig is of wordt gestopt, dien dan kunstmatige ademhaling toe en zoek onmiddellijk medische hulp.
Was na contact met de huid onmiddellijk met veel water en zeep. Verwijder onmiddellijk besmette kleding. Raadpleeg een arts in geval van huidreacties.
Als Diphoterine niet beschikbaar is, spoel de ogen dan gedurende ten minste 20 minuten met grote hoeveelheden water. Bescherm ongedeerd oog. Verwijder contactlenzen indien aanwezig en gemakkelijk te doen. Blijf spoelen en zoek onmiddellijk medische hulp.
Spoel de mond bij inslikken met veel water (alleen als de persoon bij bewustzijn is) en neem contact op met een gifcentrum of arts als u zich niet lekker voelt.
Medical Treatment
Geen speciale onmiddellijke behandeling vereist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Gebruik water om vuur te blussen., Kooldioxide, alcoholbestendig schuim of droog chemisch poeder.
Geen bekende ongeschikte media.
Thermische ontleding kan leiden tot het vrijkomen van irriterende gassen en dampen.
Firefighter Protection
Draag, zoals bij elk vuur, zelfstandige ademhalingsapparatuur en volledige beschermende uitrusting.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Gebruik persoonlijke beschermingsmiddelen. Vermijd stofvorming. Vermijd inademen van dampen, nevel of gas. Zorg voor voldoende ventilatie. Houd personeel uit de buurt van gemorst materiaal/lek.
Voorkom verdere lekkage als dat veilig is. Voorkom dat het product afvoeren binnendringt. Laat het product niet in waterwegen of rioleringen terecht. Afvoer in het milieu moet worden vermeden.
Absorbeer het gemorste materiaal met een inert absorberend middel (bijv. zand, silicagel, vod, vermiculiet) voordat het wordt overgebracht naar een luchtdichte verpakking.
Materials: inert absorberend middel (bijv. zand, silicagel, vod, vermiculiet)
Related Products
Similar products with comparable safety profiles
5-(Hydroxymethyl)furfural
CAS: 67-47-0
Formaldehyde 35 % stabilized with 10-15 % of methanol
CAS: 50-00-0
Formaldehyde, 37 wt% solution, stabilized with methanol
UFI: 3YU0-K3VW-TX07-MH9J
Formaldehyde, 37 wt% solution, stabilized with methanol
UFI: 3YU0-K3VW-TX07-MH9J
Formaldehyde 35 % TECHNICAL stabilized with 10-15 % of methanol
CAS: 50-00-0
Formaldehyde 35 % TECHNICAL stabilized with 10-15 % of methanol
CAS: 50-00-0
Formaldehyde opl. 37% (8% methanol z. stabilisator)
---
5-Methylfurfural
CAS: 620-02-0
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Vermijd contact met huid, ogen en kleding. Zie rubriek 2.2 voor voorzorgsmaatregelen.
Onder inert gas opslaan.
Handvat volgens goede industriële hygiëne- en veiligheidspraktijken. Handen wassen voor en na gebruik. Eet, drink of rook niet bij gebruik van dit product. Verwijder en was besmette kleding voordat u ze opnieuw gebruikt.
Verwijderd houden van hitte / vonken / open vuur / hete oppervlakken. Maatregelen nemen om de opbouw van elektrostatische lading te voorkomen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Uitsluitend gebruiken onder een chemische zuurkast die voor voldoende ventilatie zorgt, vooral in besloten ruimtes. Gebruik explosieveilige elektrische/ventilatie/verlichting/apparatuur. Zorg ervoor dat oogwasstations en veiligheidsdouches zich dicht bij de werkplek bevinden.
Behandel met ondoordringbare handschoenen. Inspecteer handschoenen voor gebruik. Handschoenen moeten voldoen aan de specificaties van EU-richtlijn 89/686 / EEC en de daaruit afgeleide norm EN374. Gebruik de juiste techniek voor het verwijderen van handschoenen (zonder het buitenoppervlak van de handschoen aan te raken) om huidcontact met dit product te voorkomen. Gooi besmette handschoenen weg na gebruik in overeenstemming met de toepasselijke wetten en goede laboratoriumpraktijken. Handen wassen en drogen.
Draag een goed passende veiligheidsbril die voldoet aan de Europese norm EN 166. Zorg ervoor dat u een oogbad bij de hand heeft.
Product moet met voldoende extractie in een zuurkast worden behandeld. Onder normale gebruiksomstandigheden is geen ademhalingsapparatuur nodig.
dat de hele huid bedekt is. Draag veiligheidsschoenen die minimaal aan de S1-normen voldoen. Het type beschermingsmiddelen moet worden gekozen op basis van de concentratie en hoeveelheid van de gevaarlijke stof op de specifieke werkplek.
Vermijd lozing in het milieu, zie paragraaf 6.2.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stabiel onder aanbevolen opslagomstandigheden.
Geen bekende reactiviteit, gebaseerd op beschikbare informatie.
Geen onder normale opslagomstandigheden.
Warmte, vonken, open vlammen, ontstekingsbronnen. Blootstelling aan vocht.
Sterke oxiderende middelen.
Geen gegevens beschikbaar.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- (5- (Hydroxymethyl )-2-furaldehyde (containing 3- 5% H2O as a stabilizer))
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 5-(Hydroxymethyl)-2-furaldehyde (containing 3-5% H2O as a stabilizer)?
The signal word is warning.
What is the physical form of 5-(Hydroxymethyl)-2-furaldehyde (containing 3-5% H2O as a stabilizer)?
5-(Hydroxymethyl)-2-furaldehyde (containing 3-5% H2O as a stabilizer) is a solide appearing as geen gegevens beschikbaar. with geen gegevens beschikbaar. color. It has geen gegevens beschikbaar. odor.
What is the solubility of 5-(Hydroxymethyl)-2-furaldehyde (containing 3-5% H2O as a stabilizer)?
>1000g/L
What is 5-(Hydroxymethyl)-2-furaldehyde (containing 3-5% H2O as a stabilizer) used for?
Voor onderzoeks- en ontwikkelingsdoeleinden.
What are the hazard statements for 5-(Hydroxymethyl)-2-furaldehyde (containing 3-5% H2O as a stabilizer)?
This substance has 3 hazard statements:
- H317: Kan een allergische huidreactie veroorzaken.
- H319: Veroorzaakt ernstige oogirritatie.
- H335: Kan irritatie van de luchtwegen veroorzaken.
What is the melting point of 5-(Hydroxymethyl)-2-furaldehyde (containing 3-5% H2O as a stabilizer)?
The melting point is 27 to 37°C .