Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Dimethyl phthalate solution
- Product Code
- 40069
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratoriumchemikaliën, Vervaardiging van stoffen
Manufacturers & Suppliers
Supelco
manufacturer
Merck Life Science BV
distributor
Ildefonse Vandammestraat 5/7B, B-1560 HOEILAART
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methanol EC: 200-659-6 | 67-56-1 | 90 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Bij inademen het slachtoffer in de frisse lucht brengen. Als de ademhaling is gestopt kunstmatig beademen. Een arts raadplegen.
Afwassen met zeep en veel water. Patient onmiddellijk naar een ziekenhuis brengen. Een arts raadplegen.
Ogen spoelen met water als voorzorgsmaatregel.
GEEN braken opwekken. Nooit een bewusteloos persoon laten drinken (of eten). Mond spoelen met water. Een arts raadplegen.
Immediate Medical Attention
Patient onmiddellijk naar een ziekenhuis brengen.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Gebruik waternevel, alcoholbestendig schuim, droogpoeder, of kooldioxide.
Koolstofoxiden
Firefighter Protection
Draag indien nodig een persluchtmasker bij brandbestrijding.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Draag adembescherming. Voorkom inademen van dampen/nevel/gas. Zorg voor voldoende ventilatie. Alle ontstekingsbronnen verwijderen. Personeel evacueren naar een veilige omgeving. Pas op voor dampen die accumuleren tot explosieve concentraties. Dampen kunnen accumuleren in lage ruimtes.
Voorkom verder lekken en morsen indien dit veilig is.
verzamelen met elektrisch beschermde stofzuiger of door nat opvegen
Related Products
Similar products with comparable safety profiles
Bis(2-ethylhexyl) phthalate
CAS: 117-81-7
Diisononyl phthalate
---
Diisononyl phthalate
---
Dioctyl phthalate
CAS: 117-81-7
4-(Trifluoromethyl)phthalic acid
CAS: 835-58-5
4-tert-Octylphenol-3,5-d2 solution
---
Phthalide
CAS: 87-41-2
Dimethylamine, solution in water
UFI: 3JG5-P289-NX0F-K859
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Aanraking met de ogen en de huid vermijden. Voorkom inademing van damp of nevel.
Opslaan op een koele plaats. Container goed afgesloten bewaren op een droge en goed geventileerde plaats. Geopende containers zorgvuldig sluiten en rechtop bewaren om lekkage te voorkomen.
Aanraking met ogen, huid en kleding vermijden. Handen wassen voor elke werkonderbreking en direct na gebruik van het product.
Verwijderd houden van ontstekingsbronnen - Niet roken. Maatregelen nemen om het ontstaan van elektrostatische lading te voorkomen.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Met handschoenen hanteren. Handschoenen voor gebruik goed controleren. Handschoenen netjes uittrekken zonder de buitenkant aan te raken met de blote hand. Gebruikte handschoenen direct weggooien volgens de geldende laboratoriumregels. Was en droog de handen. De gekozen veiligheidshandschoenen moeten voldoen aan de specificaties van de verordening (EU) 2016/425 en de norm En 374, die daarvan is afgeleid. Volledig contact: Materiaal: butylrubber, Minimale laagdikte: 0,3 mm, Doorbraaktijd: 480 min, Getest materiaal: Butoject® (KCL 897 / Aldrich Z677647, Maat M). Spad contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,4 mm, Doorbraaktijd: 30 min, Getest materiaal: Camatril® (KCL 730 / Aldrich Z677442, Maat M). bron data: KCL GmbH, D-36124 Eichenzell, Telefoon +49 (0)6659 87300, e-mail sales@kcl.de, test methode: EN374. Bij gebruik in oplossing, of gemengd met andere bestanddelen, of onder omstandigheden anders dan volgens EN 374, eerst contact opnemen met de leverancier van de volgens de EG-richtlijnen goedgekeurde handschoenen. Deze aanbeveling is enkel een advies en dient ge-evalueerd worden door een arbeidshygiënist of veiligheidsdeskundige die bekend is met de specifieke situatie en gebruik door onze klanten. Het moet niet gezien worden als directe toestemming voor ieder specifiek gebruiksscenario.
Gezichtsbescherming en veiligheidsbril Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU).
Waar ademhaling risico's zich voordoen, gebruik indien nodig een volledig-gezicht ademhalingsmasker in combinatie met (US) en/of type AXBEK (EN 14387) ademhalingspatroon als ondersteuning bij fabriekscontrole. Als het gelaatsmasker het enige middel van bescherming is, gebruik een volledig-gezicht ademhalingsmasker (zuurstofmasker). Gebruik ademhalingsmaskers getest en goedgekeurd door officiële overheidsinstanties zoals NIOSH (US) of CEN (EU).
Volledig pak voor bescherming tegen chemicaliën, Vlamvertragende, antistatische beschermingskleding., Het type beschermingsmiddelen is afhankelijk van de concentratie en hoeveelheid gevaarlijke stoffen op de betreffende werkplek.
Voorkom verder lekken en morsen indien dit veilig is. Product niet in de riolering laten komen.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stabiel onder de aanbevolen opslagomstandigheden.
Geen gegevens beschikbaar
Geen gegevens beschikbaar
Warmte, vlammen en vonken.
Zuren, Oxidanten, Alkalimetalen, Zuurchloriden, Zuuranhydriden, Reductiemiddelen, zuren
In geval van brand: zie hoofdstuk 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1230
- Shipping Name
- METHANOL, OPLOSSING
- Transport Class
- 3 (6.1)
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Dimethyl phthalate solution?
The signal word is danger.
What is the physical form of Dimethyl phthalate solution?
Dimethyl phthalate solution is a vloeibaar with kleurloos color. It has geen gegevens beschikbaar odor.
What is Dimethyl phthalate solution used for?
Laboratoriumchemikaliën, Vervaardiging van stoffen
What are the hazard statements for Dimethyl phthalate solution?
This substance has 3 hazard statements:
- H225: Licht ontvlambare vloeistof en damp.
- H301 + H311 + H331: Giftig bij inslikken, bij contact met de huid en bij inademing.
- H370: Veroorzaakt schade aan organen (Ogen).
What is the melting point of Dimethyl phthalate solution?
The melting point is Smeltpunt/-traject: -98 °C and the boiling point is 64 - 65 °C bij 1.013 hPa.