NextSDS Logo
Safety Data Sheet NL

4-Aminobenzoëzuur synthese kwaliteit

CAS 150-13-0

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
4-Aminobenzoëzuur synthese kwaliteit
Product Code
8.22312
Chemical Name
4-Aminobenzoëzuur

Regulatory Identifiers

CAS Number
150-13-0 Check regulations →
REACH No.
Een registratienummer is niet beschikbaar voor deze stof omdat de stof of het gebruik is uitgezonderd voor registratie of voor het jaarlijks volume geen registratie vereist is.

Identified Uses

Synthese chemicalie

Manufacturers & Suppliers

M

Millipore

manufacturer

M

Merck Life Science BV

distributor

Ildefonse Vandammestraat 5/7B, B-1560 HOEILAART

+32 (0)3 899-1301

Emergency Contacts

CHEMTREC

+(32) 28 083237

Anti-poison centre

070 245245

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Aquatic Chronic Cat. 3 H412

GHS Pictograms

Hazard Statements

H412 Schadelijk voor in het water levende organismen, met langdurige gevolgen.

Precautionary Statements

P273 Voorkom lozing in het milieu.
P501 Inhoud/ verpakking afvoeren naar een erkend afvalverwerkingsbedrijf.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
4-Aminobenzoic acid EC: 205-753-0 150-13-0 100% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Na inhalatie: frisse lucht.

Skin contact

Bij aanraking met de huid: Verontreinigde kleding onmiddellijk uittrekken. Huid met water afspoelen/ afdouchen.

Eye contact

Na oog contact: uitspoelen met ruim voldoende water. Contactlenzen uitnemen.

Ingestion

Na inslikken: slachtoffer water laten drinken (niet meer dan twee glazen). Indien onwel: arts raadplegen.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water, Schuim, Kooldioxide (CO2), Droogpoeder

Unsuitable media

Voor deze stof / dit mengsel gelden geen beperkingen voor blusmiddelen.

Specific hazards

Koolstofoxiden, Stikstofoxiden (NOx), Brandbaar. Dampen zijn zwaarder dan lucht en verspreiden zich mogelijk over de vloer. Vormt ontplofbare mengsels met lucht bij sterke verhitting. In geval van brand kunnen er gevaarlijke brandgassen en dampen ontstaan.

Instructions

Gassen/dampen/nevels neerslaan met behulp van een watersproeistraal.

Firefighter Protection

Bij brand een persluchtmasker dragen.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Vermijd stofinhalatie. Gevarenzone ontruimen, noodprocedures volgen, een deskundige raadplegen.

Environmental

Product niet in de riolering laten komen.

Cleanup methods

Droog opnemen. Vervuild oppervlak schoonmaken.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Voor voorzorgsmaatregelen zie hoofdstuk 2.2

Storage

Beschermd tegen licht. Goed afgesloten. Droog. Aanbevolen bewaartemperatuur, zie productlabel.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Volledig contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Spad contact: Materiaal: Nitrilrubber, Minimale laagdikte: 0,11 mm, Doorbraaktijd: 480 min, Getest materiaal: KCL 741 Dermatril® L. Deze aanbeveling heeft alleen betrekking op het in het veiligheidsinformatieblad genoemde product, voor de door ons aangegeven toepassingen. Wanneer het middel wordt opgelost in, of vermengd met andere substanties, onder andere condities dan vermeld in EN 16523-1 neemt u dan svp contact op met de leverancier van de CE-goedgekeurde handschoenen (b.v. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Eyes

Gebruik gezichts- en/of oogbescherming getest en goedgekeurd door officiële instellingen zoals NIOSH (US) of EN166 (EU).

Respiratory

nodig indien stofvorming plaatsvindt. Onze aanbevelingen voor het filteren van de ademhalingsbescherming zijn gebaseerd op de volgende normen: DIN EN 143, DIN 14387 en andere geldende normen m.b.t. het gebruikte ademhalingsbeschermingssysteem. Aanbevolen filtertype: Filter type P1. De ondernemer moet er voor zorgen dat onderhoud, reiniging en beproeving van adembeschermingstoestellen worden uitgevoerd volgens de voorschriften van de leverancier. Deze maatregelen moeten uitvoerig zijn gedocumenteerd.

Environmental

Product niet in de riolering laten komen.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
vast
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
lichtgeel
Colour Intensity
---
Form
---
Odor
reukloos
Odor Threshold
---
Ph
3,5 bij 5 g/l bij 20 °C
Melting Point
Smeltpunt: 187 °C bij 1.013 hPa
Boiling Point
200 °C bij 13,33 hPa
Flash Point
171 °C - gesloten beker - gesloten beker
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
circa 200 kg/m^{3}
Density
1,374 g cm^{3} bij 20 °C
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
285 °C
Solubility
---
Partition Coefficient
log Pow: 0,83 - Een bio-accumulatie is niet te verwachten., (Lit.)
Solubility In Water
4,7 g/l bij 20 °C 6,11 g/l bij 30 °C
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Geen gegevens beschikbaar
Kinematic Viscosity
Geen gegevens beschikbaar
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Het product is chemisch stabiel onder standaard omgevingsvoorwaarden (kamertemperatuur).

Reactivity

Vormt ontplofbare mengsels met lucht bij sterke verhitting. Het kritische bereik is vanaf ca. 15 Kelvin lager dan het vlampunt. Voor brandbare, organische stoffen en mengsels geldt in het algemeen: bij opwaaiend stof in een overeenkomstig fijne verdeling moet in het algemeen worden uitgegaan van het risico van een stofexplosie.

Hazardous reactions

Heftige reacties mogelijk met: Sterke oxidatiemiddelen

Avoid

Sterke verhitting.

Incompatible

Geen gegevens beschikbaar

Decomposition

In geval van brand: zie hoofdstuk 5

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 4-Aminobenzoëzuur synthese kwaliteit?

The signal word is no signal word.

What is the physical form of 4-Aminobenzoëzuur synthese kwaliteit?

4-Aminobenzoëzuur synthese kwaliteit is a vast with lichtgeel color. It has reukloos odor.

What is 4-Aminobenzoëzuur synthese kwaliteit used for?

Synthese chemicalie

What are the hazard statements for 4-Aminobenzoëzuur synthese kwaliteit?

This substance has 1 hazard statement:

  • H412: Schadelijk voor in het water levende organismen, met langdurige gevolgen.

What is the melting point of 4-Aminobenzoëzuur synthese kwaliteit?

The melting point is Smeltpunt: 187 °C bij 1.013 hPa and the boiling point is 200 °C bij 13,33 hPa.